software-help
unknown command "RESPOND"
BoxTurtle
Core AFC Software
Extra Movement & Purge
BoxTurtle
Error occurred when trying to home to buffer
BoxTurtle
Skew_Profile
HTLF
[solved] servo deploying late
BoxTurtle
Core AFC Software
Macros
[solved] Respoolers not working
BoxTurtle
Core AFC Software
Macros
2 lanes show loaded but only one is in the extruder.
Core AFC Software
Conditional pooping
BoxTurtle
Macros
Crazy long extrude move for no reason.
HTLF
Filament fully rewinding on filament change, as in not loaded anymore
BoxTurtle
Core AFC Software
Macros
No filament extruding via mainsail or screen after BoxTurtle install
BoxTurtle
TurtleNeck buffer trailing not triggering during AFC unload
BoxTurtle
Other
Macros
Boxturtle retracting a bit too far on tool change
BoxTurtle
Core AFC Software
Macros
Respooler unspooling during print
Core AFC Software
Lost communication with mcu_turtle1
Core AFC Software
Other
Option 'uart_pin' is not valid in section 'tmc2226 afc_stepper htlf_drive'
HTLF
Other
Error while respooling makes MCU crash and lose communication
BoxTurtle
Error when i try to load, unload, or run any other afc commands.
Core AFC Software
Help with autotune for BoxTurtle extruders
BoxTurtle
Other
[Solved] Unknown format code 'd' for object of type 'float'
Other
[solved] Calibrate Bowden Length failing
BoxTurtle
Turtleneck issue
HTLF
Other
N20 high pitched whine, motor stutter
BoxTurtle
I cant seem to find the serial number for my boxturtles thru ssh
Core AFC Software
Slight overextrusion during load
Core AFC Software
Macros
Print_Start loading and purging with Tool0 before loading appropriate starting filament directly aft
BoxTurtle
Macros
How to have the filament keep going after sensor to get it to the extruder gears?
BoxTurtle
[Solved] Brush macro won't move to the brush?
BoxTurtle
Macros
Infinite unload on calibration attempts.
BoxTurtle
Core AFC Software
Hub is triggered calibrating lanes but it ignores it?
HTLF
Delta + BoxTurtle + Remote Cutter – How are you setting tool_stn without a toolhead sensor?
BoxTurtle
[solved] SpoolMan & AFC
Core AFC Software
Other
[solved] Need help to figure out why print stopped.
BoxTurtle
How to set Z location for Cut Macro
BoxTurtle
Macros
Loading during print staying at 150C causing grinding
BoxTurtle
Macros
[solved] Cannot auto calibrate bowden length
BoxTurtle
TPU Help
BoxTurtle
Other
TN Expanded: Detected | TN: Trailing
Core AFC Software
AFC_Cut macro updated?
Macros
Help request (oozing during PARK) leading to clogs and filament deposits
BoxTurtle
Other
Macros
[solved] Various questions before the serial print (fine tuning)
BoxTurtle
Core AFC Software
Macros
Trying to have BTT SFS function as a bypass option, and funky issues with config
BoxTurtle
Core AFC Software
cant get AFC light to show up in lsusb
BoxTurtle
[SOLVED] AFC Led Issue
BoxTurtle
Core AFC Software
Other
Nightowl Sanity check
Macros
TMC 'AFC_stepper lane1' reports error: GSTAT: 00000001 reset=1(Reset)
BoxTurtle
[Solved] Night Owl Bowden Calibration
Core AFC Software
Other
[solved] Unnecessary up and down movement of the print bed during poop and brush printing.
Macros
TOOL_UNLOAD
Macros
TTC errors during print
Other