build-help

FIlament sensor question.. 34 messages

Dec 7, 2025, 8:11 PM Initial Setup

8lane setup help 41 messages

Dec 6, 2025, 8:58 PM BoxTurtle Initial Setup

Filamatrix Cutter 41 messages

Dec 6, 2025, 1:29 AM BoxTurtle Build Issue

[Solved] Filament detected, but not loaded 15 messages

Dec 5, 2025, 6:02 PM BoxTurtle Initial Setup

Almost there... but EVERY swap fails to unload from toolhead. 7 messages

Dec 5, 2025, 7:55 AM BoxTurtle Build Issue Initial Setup

HTLF as a auxiliary feeder between dryer and toolchanger 286 messages

Dec 5, 2025, 1:52 AM HTLF Other

BoxTurtle Brush - Lose bed space? 6 messages

Dec 5, 2025, 12:49 AM Other

[solved] Mechanical issues 179 messages

Dec 4, 2025, 12:35 PM BoxTurtle Build Issue

[solved] Spoolman & BT 22 messages

Dec 4, 2025, 1:56 AM BoxTurtle Initial Setup Other

does smb have wiring guide for mellow fly mmu ? 11 messages

Dec 2, 2025, 4:51 PM BoxTurtle Build Issue

Potential issue with drive gear assembly - LDO kit 11 messages

Dec 1, 2025, 12:54 AM BoxTurtle

Toolboard and AFC-lite collision, RatOS 14 messages

Nov 30, 2025, 11:40 PM BoxTurtle Initial Setup Other

Not loading all the way. Toolhead sensor error 13 messages

Nov 30, 2025, 5:25 PM BoxTurtle Build Issue Other

Several issues before starting test print 162 messages

Nov 29, 2025, 8:06 PM Tuning BoxTurtle Initial Setup

[solved] Just switched to AFC pro 15 messages

Nov 26, 2025, 4:55 PM BoxTurtle Build Issue Initial Setup

[solved] Spooler does not fit in tray 152 messages

Nov 26, 2025, 6:10 AM BoxTurtle Build Issue

needle bearing 5 messages

Nov 26, 2025, 5:02 AM BoxTurtle

[solved] Canbus not working 58 messages

Nov 25, 2025, 12:16 AM BoxTurtle

Cannot see AFC nor enter DFU mode 51 messages

Nov 22, 2025, 10:10 PM Initial Setup Other

HTLF Start erro 5 messages

Nov 20, 2025, 4:12 PM HTLF

AFC PRO 37 messages

Nov 18, 2025, 8:10 PM BoxTurtle Build Issue Initial Setup

Filament not always loading. [Solved] 21 messages

Nov 17, 2025, 6:14 PM Build Issue

[SOLVED]turtleneck - once fully open BT extruder still pushes and grinds filament 12 messages

Nov 17, 2025, 12:09 PM Tuning BoxTurtle

[solved] Hub sensor question 6 messages

Nov 16, 2025, 9:37 AM BoxTurtle Build Issue

[solved] AFC-Lite won’t turn on 145 messages

Nov 15, 2025, 9:57 AM Other

[Solved] Box Turtle - Lane 1 spins indefinitely on startup 35 messages

Nov 14, 2025, 10:06 PM BoxTurtle Initial Setup

[Solved] Exit hole in hub is oblong preventing filament to move freely 4 messages

Nov 14, 2025, 9:40 PM Build Issue

How to make boxturtle quieter? 4 messages

Nov 13, 2025, 1:39 AM Other

TTC on Pi 4 6 messages

Nov 10, 2025, 7:19 PM Other

[solved] How to Safely Travel to Depressor 55 messages

Nov 10, 2025, 2:16 PM Initial Setup

Calibration error 79 messages

Nov 9, 2025, 8:27 PM Initial Setup

Xol-metrix bowden length calibration issues 141 messages

Nov 9, 2025, 3:28 PM Tuning Build Issue Initial Setup

[SOLVED] Tool_stn_unload not working 3 messages

Nov 8, 2025, 11:25 PM Tuning Other

[Solved] Cut macro help 35 messages

Nov 8, 2025, 4:50 PM Tuning Other

[solved] Printer skipping steps after cut & light spools jumping 30 messages

Nov 7, 2025, 9:11 PM Tuning Other

[solved] Toolhead Loading Sequence and Confusion 9 messages

Nov 7, 2025, 5:36 PM Tuning

am i complete? 14 messages

Nov 7, 2025, 12:17 PM Other

Lane1 is loaded but extrusion is not possible 22 messages

Nov 7, 2025, 11:58 AM Initial Setup

(Solved) lane4 Hub not clear when trying to load Error 80 messages

Nov 7, 2025, 12:51 AM Initial Setup

Calibration Fidget Tuning for ASA and 0.6 mm nozzle 4 messages

Nov 6, 2025, 11:39 PM Build Issue

(SOLVED) Issues running calibration, apparently only ejecting? 6 messages

Nov 6, 2025, 9:52 PM Initial Setup

(Solved) Selector motor crash into my home sensor and destroyed it 22 messages

Nov 6, 2025, 2:48 PM Initial Setup

[solved] Trouble configuring variable_retract_length and tool_stn 59 messages

Nov 5, 2025, 12:22 AM Tuning

Error on Prep when Nevermore filter enabled 56 messages

Nov 4, 2025, 10:06 PM Other

collision on cut macro [solved] 58 messages

Nov 4, 2025, 9:04 AM Tuning

[solved] Flow issues? 77 messages

Nov 3, 2025, 1:08 AM Tuning

Toolhead sensor pin not recognized or causes problems 40 messages

Nov 2, 2025, 11:15 PM Initial Setup

[solved] Lane 1 runout triggering before hub 16 messages

Nov 2, 2025, 10:22 PM Build Issue

HTLF: Lane Selector rough motion (jam/unjam) with repeated rotation 9 messages

Nov 1, 2025, 5:24 AM Tuning Initial Setup

turtle neck buffer test 4 messages

Oct 31, 2025, 10:54 PM Initial Setup