HDMI overrides

[silent mesa]

Hello I have a problem with my xsx, I went into settings, "Video Fidelity and Overscan" located in display settings. There under display overrides, I selected HDMI and now my tv says no signal on HDMI
(the tv and xsx are connected)

[fiery gyro]

@silent mesa Thanks for posting! Please remember, support here is volunteer-based and not official. Be patient after posting, and don’t spam or ask in other channels.
If your issue is about accounts, billing, contact Xbox Support directly.
If your issue is related to an Enforcement action, no one here can help.

To help us help you, make sure to answer:

• What did you try to do and what happened? (Be specific—mention your Xbox model, PC version, Insider ring, or anything relevant.)
• **What have you tried to do to fix it already? **(List everything you’ve done to fix it.)
• Have you searched the error code or for similar problems? (Tell us what you found.)

If you don’t answer these, you might not get a response.

[dusky pewter]

Have you tried a different hdmi port

[silent mesa]

I Will not try a different HDMI port because the one I'm currently using is the only one that supports 4k144hz

[unkempt jacinth]

You can reset the display settings with the eject button

Press and hold the Power button and the Eject button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. Don’t let go until you hear the second beep or see the console start up in low resolution mode (the Xbox startup screen will appear slightly pixelated).

You can then go into display settings and set the right settings

[dusky pewter]

Maybe use the other hdmi port to actually gain input, revert the settings, THEN use your original hdmi port

[silent mesa]

Yesss i was about to say I solved the problem this way