P1 and P2 don’t register on ES2 controller

[neon dust]

Like the title says, my P1 and 2 paddles don’t register ANY inputs when I’m pressing them with a select profile (normally P1 should be right stuck click and P2 should be RB). I opened the controller to see if there was maybe a lack of contact between the pins and the board, but even when I press down on the frame to increase connection, it BARELY works. So at this point I’m not sure if it’s the board that the paddle buttons are on that’s faulty, or the pins on the main controller assembly that’s faulty. I can provide a video if needed

[lucid solar]

@neon dust Thanks for posting! Please remember, support here is volunteer-based and not official. Be patient after posting, and don’t spam or ask in other channels.
If your issue is about accounts, billing, contact Xbox Support directly.
If your issue is related to an Enforcement action, no one here can help.

To help us help you, make sure to answer:

• What did you try to do and what happened? (Be specific—mention your Xbox model, PC version, Insider ring, or anything relevant.)
• **What have you tried to do to fix it already? **(List everything you’ve done to fix it.)
• Have you searched the error code or for similar problems? (Tell us what you found.)

If you don’t answer these, you might not get a response.