#Xbox won’t connect to tv
1 messages · Page 1 of 1 (latest)
@tardy creek Thanks for posting! Please remember, support here is volunteer-based and not official. Be patient after posting, and don’t spam or ask in other channels.
If your issue is about accounts, billing, contact Xbox Support directly.
If your issue is related to an Enforcement action, no one here can help.
To help us help you, make sure to answer:
- What did you try to do and what happened? (Be specific—mention your Xbox model, PC version, Insider ring, or anything relevant.)
- **What have you tried to do to fix it already? **(List everything you’ve done to fix it.)
- Have you searched the error code or for similar problems? (Tell us what you found.)
If you don’t answer these, you might not get a response.
Plugged hdmi into tv and it just says no signal
Check if you connected to the right port. Otherwise test the cable with a pc, laptop etc and see if that works. If not, unplug your console and wait 1 minute then try again
If it still doesn‘t work do the same with your tv
buy another hdmi cable
I have tried with 2 hdmi cables
As @tardy creek said, a new cable is one way to troubleshoot but it could be your hdmi port on the console is broken. Can you try on another tv or monitor?
So to be clear:
- You are using the exact same cable on the PS5 and the Xbox.
- The cable is connected to the exact same input on the TV.
- You are turning off the consoles and teh TV each time you swap the cable from teh ps5 to the xbox
- the Xbox does nto work with any tv?
Yes
Does it work when you use troubleshooter mode: https://www.youtube.com/watch?v=3ecA1_s-axo
To start your Xbox Series X|S into safe mode, follow these steps:
Turn off your console.
Press and hold the power button and the sync button simultaneously for a few seconds until you hear a beep.
Release the sync button but continue holding the power button until you hear a second beep.
You will be brought to the Safe Mode menu.
Please note t...
Sounds like a bad hdmi port on the xbox‘ side but safe mode could resolve the issue
How do I turn off low resolution mode
It won’t let me change
reboot
How
With the power button?
I did but I won’t let me change the resolution back to normal
I put it on low resolution to try and fix
Please explain what “won’t let Me” means
Do you get an error message?
Are there no options in the box?
Are there options in the box but you select them and it ignores it?