❓-│orca-help
Rapid PETG Settings
Waves on the Top layer!
Slicing problem: "Flow::spacing produced negative spacing"
Cant add a "new" printer with a different nozzle size - keep getting the same error no matter what.
Infill not bonding with walls
Filament Sync Not Pulling Info From Printer
Cant create custom filament
How do I import a new printer from settings somebody send me?
Latest beta broken slicing on the X1C?
support top z distance higher than setting
Set speed for the white filament
Orca slice ACCESS_VIOLATION
Orcaslicer is Adding Odd Ribs/Overhangs on internal perimets
PA , settings
Sliced model looks fine, prints completely wrong
Preview tab no displaying layer lines or infill
Can't print on 2.3.2b2
(multimaterial) - One Object has an empty initial layer and can't be printed error
Why is there no setting to disable this unwanted behavoir?
SOLVED: adhesion problem
I'm using the current beta, and can't set the proper bed temperature for my GECO build plate.
OrcaSlicer crashes when switching to the device tab
Error 1:403 (Connection Failed. Please check the network and try again.)
Which setting makes this bridging and infill so efficient in Orca (stable) as opposed to others?
Do I need to have updated firmware on Bambulab P1S to use the network plugin loaded with 2.3.2-beta?
Can't connect to printer after upgrading to 2.3.2-dev
Is it possible to disable outer walls on overhangs?
SOLVED: Disabling inner wall/infill on a solid infill layer?
What is causing these differences in speed?
Creality K5 max Bed Adhesion problems
Pressure advance tuning (Marlin 2.1.2.1)
SOLVED: Parts of file not slicing
inaccurate printing time estimate
What's going on with these edges?
My Orca Slicer keeps crashing when I attempt to "Export as One STL" a part that was previously c cut
Calibration Issues
Floating lines with inner/outer/inner
SOLVED: OctoPrint refresh causes white loading screen.
Slicing makes mask disappear
I am trying to slice a part such that the bottom layer is just infill, with no bottom surface.
Layer height and overhang speed
Changing colors to part (first time)
AMS filament profile not showing under 0.2 nozzle when filament compatibility tab is correct
How do I make a CC2 profile from scratch
Having problems with artifacts when I print a 20x20x20 test cube.
Will not recognize my Adventurer 5M, but Orca-Flashforge will
SOLVED: I cannot load Sovol SV06 ACE PLUS profiles for 0.2 0.6 0.8mm
TPU Filament Settings for the CC1
Improve top surface with text
SOLVED: Multiple Issues