❓-│orca-help
outer wall issues when chamfered off the bed
Automatic generate profile index file for orcaslicer?
SOLVED: is it possible to make orca show the print time in file naming (ex: Cube 25m37s)
SOLVED: Excluded Bed Area Help - Multiple Areas
Prusa XL and Orca Slicer
Changing settings in Orca actually increases my print time?!
SOLVED: Pressure advance while printing and calibration, config vs filament setting
Always have "outer wall" as top most layer
Retraction issue on Flashforge Adventurer 4 Lite with OrcaSlicer
SOLVED: Horizontal hole supports only within hole
custom filament Material only for 1 printer
New Installation, Core dumps/segfaults on running.
Adaptive Layer Height Not Working?
auto arrange not working based on bed exclusion area.
SOLVED: Brim for support is empty
SOLVED: my orca slicer does not have archimedean circles in YOLO flow calibration
Fixing Floating Regions warning
0.8mm != 0.4mm (walls are too thin)
Not Able to Export profile
SOLVED: Inconsistent layers of gap infill / inner wall when slicing on Alpha
SOLVED: PETG prints missing extrusion sections in new Alpha
PA Calibration --> Adaptive PA
Looking for a way to set a number of slow layers above large flat supports
Installation Fails for Arch Linux
Problem with print on the 2nd layer not printing correctly.
Tree supports above certain height print with 2 support wall loops - settings specify only one
SOLVED: Exporting the wrong filament profile. Always uses the first filament [1]
latest version
SOLVED: How to rename printers now?
SOLVED: update
Calibration --> weird cornering test
weird slowdown in walls/stuttering
open
SOLVED: Ringing Tower Issue
SOLVED: No video most of the time
SOLVED: Can anyone help me setup a profile-sync between windows and linux? (Syncthing!!)
Line width setting breaks extruder movement on first layer
Wall scaring since moving to Orca
Device shows up and seemingly connects, but cannot start print in LAN mode X1C
SOLVED: What variables can Orca pass onto Klipper?
Orca Slicer Low Framerate | Linux
Don't slow bridges but do slow down for overhangs
Artifacts on courved sourface when using fuzzy skin in Orca 2.3.0
Saved profiles from 3MF disappear after Orca restart
SOLVED: Minimum graphics adapter? (no build plate showing)
Old bug? Stuck please help
Stringing/Inconsistancies HS TPU on QIDI Q1 Pro
Having problems with Pressure Advance not working in Orca Slicer 2.3.0, using PETG and CoPrint3D.
SOLVED: Some colors don't appear once model is sliced
SOLVED: Exporting Files from FreeCAD to Orcaslicer fails. Error: Object has no Geometry data