🔩│bambulab
AMS not working
X1C / Orca Slicer - Head collides with front end
No fan speeds shown
Firmware 1.9.x support
New to Orcaslicer ... help???
H2D Support PLZ
1.09.00.00??
How to print a model elevated above the build plate?
Orca 2.3.1alpha and BambuLab
P1S Textured PEI Plate Max Temp
I will sell my soul for decent H2D Support
MQTT ERROR WITH A1
Nozzle/temp warning w/ E3D Obxidian 0.6mm on X1C
Layer shifts on one side? P1S help needed
Adaptive Pressure Advance - What accelerations to test against?
Unable to print due to temp and new nozzle types
Liveview with new Firmwares
Bambu Connect - "File format error"
Print via bambu connect
Orca 2.3.0 Cannot send file to print
Is there an existing class action I can sign onto?
TPU
Firmware 1.8.x support test & feedbacks
4/29 X and P Series AMS 2 Update Firmware
camera Timelapse no work,
Connecting to Orca (in LAN MODE) With X1Plus
X1C TPU print stringing outside of defined tool paths
Help with Seams on Bambu Lab A1 for tall prints
AMS Sync problem
Question about AMS 2 Pro
Help with P1S+AMS Runout Switch and Purging into Model in OrcaSlicer
H2D support in Dev mode?
P1S Connection Failing and Crashing OrcaSlicer
Plugin to connect A1 to Orca?
X1C stopped connecting to Orcaslicer
MQTT Command Verification failed, after updating firmware.
AMS Lite doesn't work in LAN Only mode
Can't connect to P1S
How do I determine which one to choose
using existing bambu connect from my phone
Bambu X1C: Error -4020
A1 in lan mode not connecting
bambu X1 does not responses
Vibration/noise on prints
No HMS notifications from Bambu P1S in LAN mode?
What is this error
SuperTack
Setting up A1 + AMS Lite
X1C LAN Mode Video - Low Framerate
I am severely red/green colorblind.