#ss://api.elevenlabs.io/v1/text-to-speech/numbers/stream-input?model_id=eleven_turbo_v2_5&output_for

1 messages · Page 1 of 1 (latest)

reef helmBOT
#
AI-generated Answer for forgottensemicolon

If your avatar is not producing audio and you're only receiving something unexpected, here are a few troubleshooting steps:

  1. Check the URL Syntax: Ensure the WebSocket URL is correctly formatted. For example, if you're using the Turbo v2.5 model, the syntax should include the correct parameters, such as:

    wss://api.elevenlabs.io/v1/text-to-speech/{voice_id}/stream-input?model_id=eleven_turbo_v2_5&language_code=en

    Replace {voice_id} with the actual voice ID and adjust language_code to match your desired language (e.g., en for English).

  2. Verify Output Format: If you're using output_format=pcm_22050, ensure your system supports this format. You might need to adjust the format to match your requirements.

  3. Experimental Features: If you're using the language_code option, remember that this functionality is experimental and only available with the Turbo v2.5 model. If you're experiencing issues, try increasing the chunk_length_schedule parameter to values like [460, 470, 490, 500] for better context handling.

  4. Check Parameters: Ensure all required parameters, such as model_id, voice_id, and output_format, are correctly set. Missing or incorrect parameters can lead to issues.

  5. Flush Parameter: If you're processing shorter messages, consider using the flush parameter to improve output consistency.

If the issue persists, you may need to provide more details or contact the support team for further assistance.

slow pewter
#

voice id kısmına agent id mi gireceğiz

reef helmBOT
#
AI-generated Answer for forgottensemicolon

Voice ID kısmına, kullanmak istediğiniz sesin ID'sini girmeniz gerekiyor. Bu ID'yi bulmak için Voice Lab sayfasına gidip, sesinizi seçtikten sonra "View" butonuna tıklayarak detay panelini açabilirsiniz. Panelin sağ alt köşesinde bulunan "ID" butonuna tıklayarak ses ID'sini alabilirsiniz.

Eğer başka bir sorunuz varsa, lütfen bize ulaşın.

slow pewter
#

hangi modeli kullanabildiğime nerden bakabilirim, sanırım aldığım hata model ile alakalı

reef helmBOT
#
AI-generated Answer for forgottensemicolon

Hangi modelleri kullanabileceğinizi görmek için Studio veya API References sayfalarını ziyaret edebilirsiniz. Bu sayfalarda, mevcut modeller ve özellikleri hakkında detaylı bilgi bulabilirsiniz. Eğer bir hata alıyorsanız, kullandığınız modelin desteklenip desteklenmediğini kontrol etmek iyi bir başlangıç olabilir.

slow pewter
#

javascript web programı yapıyorum, conversation ai'yi avatar'ımla implement etmek istiyorum. direkt kopyala yapıştır ile avatarım konuşsun istiyorum.

async function recordingRecord() Gibi bir fonksiyon yazıyorum.

örnek kod verir misin, tamamen çalışan

reef helmBOT
#
AI-generated Answer for forgottensemicolon

I apologize, but I don't have enough information to provide a complete working example for implementing Conversational AI with an avatar in a JavaScript web application. However, I can offer some general guidance based on the available information:

  1. Regarding the avatar not talking and getting an unusual response:
    The URL you provided (ss://api.elevenlabs.io/v1/text-to-speech/numbers/stream-input?model_id=eleven_turbo_v2_5&output_format=pcm_22050) seems to be incomplete or incorrect. For text-to-speech requests, you should use the ElevenLabs API with the correct endpoint and parameters.

  2. For the voice ID, you should use the specific voice ID you want to use, not an agent ID. You can find available voices in the Voice Library.

  3. To check which models you can use, refer to the API documentation or your account settings in the ElevenLabs dashboard.

  4. For implementing Conversational AI with an avatar:
    Currently, it's not possible to directly integrate NVIDIA's virtual avatar technology with ElevenLabs' Conversational AI platform. However, you can customize the Conversational AI widget to use a static image as an avatar by uploading the image in the avatar section of your Conversational AI widget settings.

  5. Regarding the recordingRecord() function:
    Without more context about what this function is supposed to do, I can't provide a specific implementation. It would be helpful to know more about your exact requirements and what you're trying to achieve with this function.

If you need more specific help, please provide more details about your project, what you've tried so far, and any specific errors you're encountering. This will allow me to give you more targeted assistance.

slow pewter
#

bana javascript tarafında kullanabilmem için örnek paylaşır mısın

reef helmBOT
#
AI-generated Answer for forgottensemicolon

Unfortunately, the provided context does not include specific JavaScript code examples for implementing ElevenLabs' text-to-speech API. However, you can refer to the API References for detailed documentation on how to use the API, including endpoints, parameters, and authentication.

If you need further assistance, feel free to provide more details about your implementation, and I can guide you on the general approach.

slow pewter
reef helmBOT
#
AI-generated Answer for forgottensemicolon

It seems like you're trying to implement ElevenLabs' Conversational AI with an avatar in a JavaScript web application. Let me provide some guidance based on the information available:

  1. The URL you provided (ss://api.elevenlabs.io/v1/text-to-speech/numbers/stream-input?model_id=eleven_turbo_v2_5&output_format=pcm_22050) doesn't appear to be correct for the Conversational AI API. It looks like a text-to-speech endpoint.

  2. For Conversational AI integration, you should use the WebSocket API. The correct format for the WebSocket URL is:

    wss://api.elevenlabs.io/v1/convai/conversation

  3. You don't need to include the voice ID in the URL. The agent ID is used instead.

  4. To check which models you can use, you should refer to the documentation or your account settings. The error you're experiencing might be related to the model selection.

  5. For a JavaScript web application, you can use the ElevenLabs React SDK. Here's a basic example of how you might set up a conversation:

import { useConversation } from '@11labs/react';

function ConversationComponent() {
  const conversation = useConversation();

  const startConversation = async () => {
    try {
      await conversation.startSession({
        agentId: 'YOUR_AGENT_ID',
        // Include other necessary parameters
      });
      // Handle successful connection
    } catch (error) {
      console.error('Failed to start conversation:', error);
    }
  };

  const sendMessage = async (message) => {
    try {
      await conversation.sendMessage(message);
      // Handle message sent successfully
    } catch (error) {
      console.error('Failed to send message:', error);
    }
  };

  // Add more functions to handle incoming messages, audio, etc.

  return (
    // Your component JSX
  );
}
  1. Regarding the URL https://api.elevenlabs.io/v1/conversation/agent/get-signed-url, this appears to be for generating a signed URL for authenticated agents. If you're using a public agent, you don't need this step.

Remember to replace 'YOUR_AGENT_ID' with your actual agent ID. Also, make sure you've installed the necessary dependencies and set up your project correctly.

For a complete, working example, I recommend checking the official documentation or the GitHub examples provided by ElevenLabs. These resources will give you more detailed and up-to-date information on implementing Conversational AI in your JavaScript application.

slow pewter
#

Whats rcorrect URL for conversation

reef helmBOT
#
AI-generated Answer for forgottensemicolon

The correct URL for initiating conversations with ElevenLabs Conversational AI depends on the specific API endpoint you are using. Based on the provided context, you can refer to the API Reference for Conversations for detailed information on the correct endpoints and their usage.

If you are looking to authenticate agents with a signed URL, you can follow the guide provided in the Conversational AI Guide for Next.js. This includes examples for setting up conversations and handling authentication.

Let me know if you need further clarification!

slow pewter
reef helmBOT
#
AI-generated Answer for forgottensemicolon

The error {"detail":"Not Found"} indicates that the URL you are using is incorrect or the endpoint does not exist. Based on the provided context, the correct endpoint for obtaining a signed WebSocket URL for a conversational agent is:

https://api.elevenlabs.io/v1/convai/conversation/get_signed_url?agent_id=[AGENT_ID]

Make sure to replace [AGENT_ID] with your actual agent ID and include the correct API key in the headers. Here's an example of how to use curl to make the request:

curl -X GET "https://api.elevenlabs.io/v1/convai/conversation/get_signed_url?agent_id=61hOGaIPNqXNGf2AzhOS" \
  -H "xi-api-key: your_api_key"

Key Points:

  1. Use the GET method, not POST.
  2. Ensure the agent_id is valid and matches the one configured in your ElevenLabs account.
  3. Include the xi-api-key header with your API key.

If the issue persists, verify that your API key and agent ID are correctly configured and have the necessary permissions. Let me know if you need further clarification!

slow pewter
reef helmBOT
#
AI-generated Answer for forgottensemicolon

I apologize, but it seems there's an issue with the API endpoint you're trying to access. The 405 Method Not Allowed error suggests that the POST method is not supported for this particular endpoint.

For the /v1/convai/conversation/get_signed_url endpoint, it's likely that a different HTTP method is required. Typically, GET requests are used to retrieve information, while POST is used to submit data.

To resolve this, you could try:

  1. Using a GET request instead of POST for this endpoint.
  2. Double-checking the API documentation to ensure you're using the correct HTTP method for this specific endpoint.
  3. Verifying that you have the necessary permissions to access this endpoint.

If you continue to experience issues, you may want to review the API References for the most up-to-date information on endpoint usage and requirements.

If you need further assistance, please provide more details about what you're trying to accomplish, and I'll do my best to help guide you in the right direction.

slow pewter
reef helmBOT
#
AI-generated Answer for forgottensemicolon

The errors you're encountering suggest issues with the HTTP methods and the endpoint being accessed.

  1. 405 Method Not Allowed: This error typically means that the HTTP method you're using (POST in this case) is not supported by the endpoint. You might want to check the API documentation to confirm the correct method for this endpoint.

  2. 404 Not Found: This error indicates that the resource you're trying to access does not exist at the specified URL. Ensure that the URL is correct and that the agent_id is valid.

If these issues persist, please verify the API documentation for the correct usage of these endpoints or reach out to the support team for further assistance.

slow pewter
reef helmBOT
#
AI-generated Answer for forgottensemicolon

A 404 Not Found error typically indicates that the requested resource could not be found on the server. Here are a few steps you can take to troubleshoot this issue:

  1. Verify the URL: Ensure that the URL is correct and that there are no typos.

  2. Check the Agent ID: Confirm that the agent_id you are using is valid and exists in the system.

  3. Endpoint Availability: Make sure that the endpoint you are trying to access is available and correctly set up.

If the issue persists, you might want to reach out to the support team with details of your request for further assistance.

slow pewter
#

const response = await fetch(https://api.elevenlabs.io/v1/convai/conversation/get_signed_url, {
method: "POST",
headers: {
"xi-api-key": elevenLabsApiKey,
"Content-Type": "application/json"
},
body: JSON.stringify({ agent_id: agentId })
});

https://api.elevenlabs.io/v1/convai/conversation/get_signed_url

POST

405 Method Not Allowed

reef helmBOT
#
AI-generated Answer for forgottensemicolon

It seems you're encountering issues while trying to get a signed URL for an ElevenLabs Conversational AI agent. Let me help clarify the situation based on the information you've provided:

  1. The correct endpoint for getting a signed URL is:
    https://api.elevenlabs.io/v1/convai/conversation/get_signed_url

  2. The method for this endpoint should be GET, not POST. Your attempts with POST are resulting in a 405 Method Not Allowed error.

  3. The agent_id should be passed as a query parameter in the URL, not in the request body.

  4. Make sure you're using a valid agent_id. The 404 Not Found errors suggest that the agent_id you're using might not exist or you might not have access to it.

Here's the correct way to make this request:

const agentId = 'YOUR_AGENT_ID';
const elevenLabsApiKey = 'YOUR_API_KEY';

const response = await fetch(`https://api.elevenlabs.io/v1/convai/conversation/get_signed_url?agent_id=${agentId}`, {
  method: "GET",
  headers: {
    "xi-api-key": elevenLabsApiKey
  }
});

if (response.ok) {
  const data = await response.json();
  const signedUrl = data.signed_url;
  // Use the signedUrl for further operations
} else {
  console.error('Failed to get signed URL:', response.status, response.statusText);
}

Make sure to replace 'YOUR_AGENT_ID' with the actual ID of the agent you're trying to use, and 'YOUR_API_KEY' with your ElevenLabs API key.

If you're still encountering issues after making these changes, double-check that:

  1. Your API key is valid and has the necessary permissions.
  2. The agent ID you're using exists and is accessible with your account.
  3. You're not hitting any rate limits or other API restrictions.

If the problem persists, you may need to contact ElevenLabs support for further assistance, as there might be an issue with your account or the specific agent you're trying to use.

slow pewter
#

const elevenLabsApiKey = document.getElementById("apikey-eleven")?.value || "";
const agentId = document.getElementById("agentid-eleven")?.value || "OfYPDvdvGCxb1tXvZjvP";

        console.log("ElevenLabs Conversation API kullanılıyor...");
        
        // 1. Signed URL al
        const response = await fetch(`https://api.elevenlabs.io/v1/convai/conversation/get_signed_url?agent_id=${agentId}`, {
          method: "GET",  // POST değil, GET olmalı
          headers: {
            "xi-api-key": elevenLabsApiKey
          }
        });

https://api.elevenlabs.io/v1/convai/conversation/get_signed_url?agent_id=OfYPDvdvGCxb1tXvZjvP

GET

404 Not Found

reef helmBOT
#
AI-generated Answer for forgottensemicolon

The issue you're encountering with the GET request returning a 404 Not Found and the POST request returning a 405 Method Not Allowed suggests that the endpoint or method you're using might not be correct or properly configured.

Here are some steps to troubleshoot:

  1. Verify the Endpoint: Ensure that the URL https://api.elevenlabs.io/v1/convai/conversation/get_signed_url is correct and active. If the agent is public, you may not need to generate a signed URL. For private agents, generating a signed URL is required.

  2. Check Agent ID: Confirm that the agent_id you are using (OfYPDvdvGCxb1tXvZjvP) is valid and corresponds to an existing agent in your ElevenLabs account.

  3. Authentication: Ensure that the xi-api-key is valid, active, and has the necessary permissions to access the endpoint.

  4. Request Method: If the endpoint requires a POST request, ensure the payload structure matches the API requirements. For example:

    const response = await fetch("https://api.elevenlabs.io/v1/convai/conversation/get_signed_url", {
  method: "POST",
  headers: {
    "xi-api-key": elevenLabsApiKey,
    "Content-Type": "application/json"
  },
  body: JSON.stringify({ agent_id: agentId })
});

  5. Public Agents: If the agent is public, you can connect directly without generating a signed URL. This simplifies the process and avoids authentication issues.

  6. Documentation: Refer to the Conversational AI Guide for detailed instructions on using signed URLs.

If the issue persists, double-check the API endpoint and your agent's configuration. If necessary, reach out to ElevenLabs support for further assistance.

slow pewter
reef helmBOT
#
AI-generated Answer for forgottensemicolon

I apologize, but I don't have enough information to provide a detailed explanation about that specific endpoint or the process of generating signed URLs for ElevenLabs' Conversational AI feature. The context provided doesn't contain explicit information about this particular API endpoint or its usage.

However, I can offer some general advice when dealing with API issues:

  1. Double-check the API documentation to ensure you're using the correct endpoint and HTTP method.
  2. Verify that you're using the latest version of the API.
  3. Make sure your API key is valid and has the necessary permissions.
  4. If you're getting error responses, carefully read the error messages as they often provide clues about what's wrong.

If you're continuing to experience issues, I recommend reaching out directly to ElevenLabs' support team. They would have the most up-to-date and accurate information about their API endpoints and can provide specific guidance for your use case.

slow pewter
#

{
"signed_url": "wss://api.elevenlabs.io/v1/convai/conversation?agent_id=pbjJeIQQGDtSPyKeglFS&conversation_signature=signature"
}

Error: Connection timed out - no response in 12 seconds

reef helmBOT
#
AI-generated Answer for forgottensemicolon

The error "Connection timed out - no response in 12 seconds" typically indicates that the WebSocket connection is failing to establish or communicate properly. Here are some steps to troubleshoot and resolve this issue:

1. Verify the Signed URL

  • Ensure the signed URL is correctly generated and includes all required parameters (agent_id and conversation_signature).
  • Confirm that the agent ID is valid and corresponds to the agent you are trying to connect to.
  • If the agent is public, you may not need a signed URL. For private agents, generating a signed URL is mandatory.

2. Check Network Connectivity

  • Ensure your network allows WebSocket connections. Some firewalls or proxies may block WebSocket traffic.
  • Verify that your application is running in a secure context (HTTPS) as WebSocket connections require this.

3. Authentication

  • Confirm that your API key is valid and active. If the API key is incorrect or expired, the connection will fail.
  • Ensure the API key has the necessary permissions to access conversational streams.

4. WebSocket Implementation

  • Double-check your WebSocket client implementation. Ensure you are correctly handling events like onopen, onmessage, onerror, and onclose.
  • Example WebSocket connection code:
    const socket = new WebSocket("wss://api.elevenlabs.io/v1/convai/conversation?agent_id=pbjJeIQQGDtSPyKeglFS&conversation_signature=signature");

socket.onopen = () => {
  console.log("WebSocket connection established.");
};

socket.onmessage = (event) => {
  console.log("Message received:", event.data);
};

socket.onerror = (error) => {
  console.error("WebSocket error:", error);
};

socket.onclose = (event) => {
  console.log("WebSocket connection closed:", event);
};

5. Agent Configuration

  • Ensure the agent is properly configured with the correct audio format and settings. For example:
    • Audio format: "μ-law 8000 Hz"
    • Input format: "μ-law 8000 Hz"

6. Timeout Handling

  • Implement reconnection logic with exponential backoff to handle timeouts or connection failures.
  • Example:
    let retryCount = 0;

const connectWebSocket = () => {
  const socket = new WebSocket("wss://api.elevenlabs.io/v1/convai/conversation?agent_id=pbjJeIQQGDtSPyKeglFS&conversation_signature=signature");

  socket.onopen = () => {
    console.log("WebSocket connection established.");
    retryCount = 0; // Reset retry count on successful connection
  };

  socket.onerror = (error) => {
    console.error("WebSocket error:", error);
    retryCount++;
    setTimeout(connectWebSocket, Math.min(1000 * retryCount, 30000)); // Exponential backoff
  };

  socket.onclose = (event) => {
    console.log("WebSocket connection closed:", event);
    retryCount++;
    setTimeout(connectWebSocket, Math.min(1000 * retryCount, 30000)); // Exponential backoff
  };
};

connectWebSocket();

7. Test with the Web Interface

  • If the agent works correctly through the ElevenLabs web interface, it confirms the agent setup is correct. This can help isolate the issue to your implementation.

8. Debugging Tools

  • Use browser developer tools (e.g., Chrome DevTools) to monitor WebSocket traffic and identify any errors or unexpected behavior.
  • Log all WebSocket events and API responses to track the flow of data.

If the issue persists, you may need to verify your API key and agent ID or check for any specific network restrictions.

slow pewter
#

my application works at : http://localhost:8080/

I can get a response when sending a message, but I'm having trouble with the conversation side.