#arma3_launcher
1 messages · Page 4 of 1
Mod disappeared from workshop yes.
Most likely a steam hickup. CUP has not removed content from the workshop
I had 2 guys have the same thing happen to them today. They just unsubbed and resubbed.
if you try to unsubscribe from a mod in the launcher, while a file handle to files of the folder is still open, the launcher freezes
is it normal that launcher creeps out and shows almost no servers, or am I doing something wrong
seems like BI master server isnt very agile, same behaviour with ingame browser
Steam master server*
hmm how come its not the case with other games?
anything I can do on my side
I mean look at this, pathetic https://i.imgur.com/NfVRUdK.jpg
how about this setting https://i.imgur.com/3CwQZff.png @lyric elm ?
Your pings look okey tho
aye it just wont list many servers, and must say it hoggs my internet connection when it searches servers
as if like I am running some heavy p2p
but Im not
why is launcher such a hog, it eats all my internet, I cant even open a browser
Im not sure if I should report this as a bug
anyone else experience this?
Are you sure it's the launchers fault?
yes, please dont start tech support tricks on me 😂
whenever I run launcher and go to servers tab to look for a server, all my other apps seize working (no internet), browsers report there is no internet too
resolving host... dns probe finished - no internet
mind you Im on a broadband cable connection, 75/5Mbps
I have only seen this happening when using bit torrent software and arma3
number of connections or something, but even with BT I can at least open a browser, slower but it runs
what's the load on your ethernet port? have you checked that?
@frail mica what do you mean load?
what is the traffic load on your ethernet port when you have the system monitor open while you have the launcher running?
@tender granite
almost nothing measure in kb
@frail mica I captured traffic with wireshark but I never used it and have no idea what I was looking at
then your router is bottle necking
check for too many connections warnings, ect. in your routers system logs
i had similar issues long time ago with an old fritz box
shew, my router is some old cable wireless voice gateway and its menu is very limited
or Im locked out by admin from some settings
Thompson / Technicolor something
but it only happens with arma 3 when searching for servers
flood?
ok... i'd bet my ass it's your router
flood sounds similar
*familiar
that's sort of the warning for too many connections
iirc
and tbh, i doubt you can fix that on your router
hmmm... you could try to deactivate ip flood detection
you have a copy of your routers log when this happens?
hmmmmmm
let me try again
nah it worked once I disabled flood detection and now its behaving the same as before
hmmm...
i'm honestly out of ideas then. like i said, i'd bet my ass it's your router bottle necking.
maybe connection limit on hoster
looks like it works now, when I disabled flood detection and port scan detection
this makes me vulnerable Im not sure I should leave this like that
👆
and flood detection won't help you much if they just saturate your connection with a DDoS
i don't even have those options anymore. my old routers had them iirc, but this stuff should be detected by the ISP already
so i'd say you're still pretty save to detick those params
sorry, i was wrong.
i just checked my router and i still have the ip flood detection
but it's deactivated
okay that seem to be the thing, but I will try once more to be sure
its kind of random now, but it works better than it did, and its not hogging anymore
guess 4 or more eyes and 2 heads see more than one, cheers
difference > https://i.imgur.com/psH8P98.png
as long as it is working-ish, i'm happy for you 😄
👍🏼
After the the update steam a3 launcher shows a extra mod top of mod list for server. The mod has no name. And server doesnt show up on A3 launcher anymore because says unkown mod. Has anyone else have this problem?
hei guys, i have a little problem, i can't run the launcher, it starts, but doesn't load, and just close without any message :S what can i do? 😦
have you tried to verify game files?
yes not working, i just waited, and today works but if i close and open again it happens again too 😦 so it's not opening, i need to leave it open so.. sad
heyo, question:
When unsubscribing and deleting the files of mods,
Shouldn't i be seeing the drive they are all installed on begin to gain more storage space? Is there an extra step i need to take? Have i made a terrible mistake...?
Have you found the hidden !workshop folder? @vapid sand
i have!
it seems it just required a restart of my PC to see the updated status of the drive
quite unusual but hey, it worked doing it all form the launcher
If you're on a hdd, uninstalling anything over 5gb might be worth a defrag if your Windows doesn't do it automatically
im on a partitioned SSD. I think the problem lies somewhere in my bios. But, if all it takes is a simple restart, then I don't feel the need to go digging 😅
😄
I need help with Arma 3 on mac
Hey what do you need I use it also without problem ? may help
@limpid hound you mean me?
I wanted to know if there was an update for mac for 1.92, I have read that they stopped updating for mac, but wasn't sure
they stopped updating mac and linux.
The ports project has been suspended for a undefined time.
@gentle oxide No update today soon but now we are on 1.82 version and add me to play with me and others users like us on mac and linux 😄
best solution is to create a boot camp windows 8.1 more stable on MAC but it depends wich type of MAc you have 😄
@limpid hound I did but now I got a small problem
Okay tell me ?
I'm seeing an odd behavior with the launcher after installing MSI afterburner. Whenever I start launcher, afterburner quietly shuts down. Not minimized, not in tray. No process running either. Whats up with that?
Ok case closed, seems it's related to battle eye and the kernel level monitoring. Setting low-level access to kernel mode seems to solve this issue.
is it possible to launch straight into editor with a blank mission?
5/15/2019 1:34:30 AM - BattlEye Service startup failed. how do i fix this?
@glad cedar Reinstall battle eye
ok i will try launching it now
Go to your Arma 3 install directory (where you installed the game)
BattlEye folder
Uninstall battleye (make sure arma is fully closed)
Install battleye (again, closed fully)
Launch arma
Click ok (It's just asking if it can sell your information to chinnese hackers or something)
Navigate to C:\Program Files (x86)\Common Files\BattlEye and delete contents in that folder.
Now open ArmA 3 game by Launcher and see if that BE folder populates with the new files.
If it doesn't update the BE folder, go to the Steam window and right-click on ArmA 3 > Properties
Select the Local Files tab in that window and select Verify Integrity of Game Files
After that, launch ArmA 3 again and it should update the BattleEye folder.
https://forums.bohemia.net/forums/topic/203384-battleye-service-installation-failed/
ok soo all the files in battleye?
all these?
@hollow knoll
im verfiying now
should i try running it without mods first to see if that would work after verfiying it?
why cant I open arma 3 samples? seem like I can't find its exe launcher
shortcut exe file doesn't work. it pop up and then disappear
Idk, try re-installing
I did... same problem
@warm schooner
go to ..\Steam\steamapps\common\Arma 3 Samples
right. the thing is that theres no arma 3 samples.exe
unfortunately it doesnt work that way for me
in the launcher if i press play i'd either get a message that says "the code execution cannot proceed because was not found" or it will crash the entire computer
ive tried reinstalling and verifying the integrity but it does the same thing
same here... you still have this issue?
There is simply nothing to open in arma 3 samples
it's literally a folder with files in it
there is no exe or anything
how would I grab an character model? so I can work on it in blender
HAT JEMAND ZEIT
@drowsy junco thanks for the reply. The challenge isn't loading a saved mission with parameters. The challenge is loading no mission - just the editor. I guess I can try using a mission file that doesn't exist, but I'll bet there'll be an error popup to close every time.
yeah. I want to grab that model in his underwear
in the launcher if i press play i'd either get a message that says "the code execution cannot proceed because D3DCOMPILER_43.dll was not found" or it will crash the entire computer
ive tried reinstalling and verifying the integrity but it does the same thing
please help if you know how to fix this
10sec of google search told me that this is not a game issue per se. now it's your turn to finally make use of the strong google-fu
@brisk gale
@limpid hound I’m on a Mac and like to join as well
@hollow urchin contact me tomorrow late 17 o’clock world time I will be free 👌
@frail mica yea i did google it and none of the solutions worked
what did google tell you to do?
most of it just said download directx
most of it
what did the others say?
as you can tell, it's a DirectX issue. here are some more possible solutions to try out.
https://www.lifewire.com/fix-d3dcompiler-43-dll-not-found-or-missing-errors-2623246
https://windowsreport.com/fix-d3dcompiler_43-dll-missing/
'D3dcompiler_43.dll Not Found' errors usually indicate a DirectX problem. Don't download d3dcompiler_43.dll. Fix the problem the right way here.
@brisk gale how much RAM do you have and how big is your page file?
I used to get DX errors like that when I didn't have enough memory available, because a Windows 10 update reduced my page file settings
what's page file?
temporary disk space that the game uses while running, to supplement RAM
i have 12GB of ram
ive played arma a lot before but this just suddenly started happening
Hmm, I would think that 12GB would be enough
some windows / driver update screwed you over. i would say it was win10, like always. the only thing i can imagine is to try the solutions described in the links.
worst case, reinstall win10. no so bad case, revert to win8.1
im going to try the solutions you sent and if they dont work
would going to win8 be a bad idea?
LOL no... :D
i had win 10 installed for exactly 3 days and straight went back to 8.1
way less issues with the more mature but older OS than with this BS beta state win10
sure, the UI is kinda s**t, but there is this nice little thing called "classic shell for windows 8.1"
all latest reported issues with arma can be narrowed down to windows 10 (id say 95% of the cases)
mostly (USB) audio and graphics driver dropouts
it all started with the autumn creators update for win10 back in '17 iirc
if i do go back to windows 8 would i have to reinstall everything?
most likely i guess
oof alright
well, you should reset your system from time to time anyway. i do it ever 5-6 months
sometimes earlier
depending on the degree i fucked it up 😄
is there a way to make the A3 launcher server browser query more servers at the same time?
i see here only like 5 per second
so to scan all 10k+ it takes over 30 minutes
even querying the official servers it takes a minute to get the first ten
and you get quite some CPU use by both Steam and A3 launcher..
it seems like while its polling for servers, it doesnt have some cpu wait, but way too aggressive checking for new input
for official servers also it seems not to stop even though it found all there is
I think you can configure that in the steam settings
Not sure if it's just me, but when browsing the launcher for Livonia (Enoch) it shows an unknown mod that has no name even on server with no mods
so does anything know anything about the update to the query protocol (prob why launcher is broken)
https://dl.dropboxusercontent.com/s/5z9el1m10283nsq/3780e1ee-0043-416f-9d5b-5029eb2e7c38.png
this is the current (live) implementation https://community.bistudio.com/wiki/Arma_3_ServerBrowserProtocol2
but its outofdate for the dev branch
(the first byte in the steam query info is the protocol version)
Is there a way to sort mods by type
maybe by the workshop tags to make it easier
!purgeban @cursive musk 7d spamming
*fires them railguns at @cursive musk* Ò_Ó
I second @timid blaze
@timid blaze I suggested a while ago that we should able able to group mods together in "folders" , so we can put all weapon mods into a folder called "Weapons" for example.
Im no expert but I dont think it would be that hard
Trying to use game updater to install the Dev branch of Arma 3. Followed all the steps, made sure development was selected and have the new folder with [Development] in it. However the launcher within that folder still seems to just launch the standard version of the game, not the Dev branch.
Any tips?
I assume that's the Arma3GU exe? That always crashes for me on initialising addons.
yes
hello?
I have a question about launching arma 3
when I launch arma its says windows cannot access specified path or you may not have permission to access the item
why does it say that and how can I fix it plz help
have you tried google?
@cloud lantern
if so, you would have found at least one solution by now...
Hello guys, do I need the original game installed on steam to be able to use A3 launcher?
also im completely noob at the game
Not sure what you're exactly asking for. You need to have Arma 3 installed to be able to use Arma 3 launcher (or any other launcher, for that matter)
I want to play Exile mod
Yes, you need Arma 3
So, I've got the game now
I need to search for exile mods in A3 launcher and download them?
ok thank you
tried to send it :/
1 sec ill do pastebin
i can still open the game its just the launcher that crashes
verify game installation via steam
ill try that then
it could be anything tho...
- update your graphics card
- go to the manufacture website of your mainboard and DL all drivers. install them manually
motherboard?
if that doesn't work, open a ticket on the tracker (if there is no other ticket already)
motherboard
same
xd
so i installed new drivers should i restart now?
sry for being a boomer
ill just yeet it and expect you to say yes
didnt work dammit
i cant even find a download for drivers on my motherboard
think i found them
what the heck do i do with a .cap file
windows 10 64 bit
https://www.asus.com/us/Motherboards/H81IPLUS/
sorry i was looking for a usb
atleast i think thats the motherboard i have
you need to make sure you have this MB
if you mainboard doesn't support win10 drivers, revert back to 8.1
bios right
nope, unless you know EXACTLY that you are doing. do all the other drivers tho
i have no clue what im doing xd
ok, it's all but bios then
i'm off to bed now. others might be of assistance if you ask nicely
so audio, lan, utilities, chipset and sata?
👍
sounds like you dont have dotnet and vcredist libraries installed
if you go into your main Steam install directory to this folder - C:\Program Files (x86)\Steam\steamapps\common\Steamworks Shared\_CommonRedist you will find redistributables,.
Within the DotNet folder navigate to the 4.5.2 folder and run the executable there to install the DotNet libs.
Within the vcredist folder you will have to navigate to each of these folders: 2010, 2012, 2013.
Within each one of the above folder run the vcredist_x64.exe if you are on a 64Bit OS and run the vcredist_x86.exe if you are on a 32bit OS.
Do those in order starting with 2010, then 2012, and finally 2013.
When you are done restart your computer to ensure the libraries updated properly and then try to run the launcher again.
@sour spade ^^ try this and let us know how you get on.
If this works im gonna be super happy
it says dotnet is already installed but i cant even find it
is there an option to reinstall it? if there is i'd do that, if not skip it and move onto the next item
yeah it will install them with the silent install and no restart flags 😃
what should i do now?
if you ran all those installers i'd restart your pc, then try the launcher after it restarts
ive restarted my pc twice
what does the launcher do?
the arma 3 launcher?
yea
this is from running the launcher via steam yea?
it looks like you have commandline args for the launcher for mods
Command line: "C:\Program Files (x86)\Steam\steamapps\common\Arma 3\arma3launcher.exe" -mod=@ace;@CBA_A3
that line should just be Command line: "C:\Program Files (x86)\Steam\steamapps\common\Arma 3\arma3launcher.exe"
so I guess you added -mod param someplace?
i removed it and nothing changed
actually science forbids this
yeah literally nothing changed
hm, most issues i can find with the error say missing libraries (which you just reinstalled) or old libraries someplace,. I would fill out a feedback tracker launcher issue, include you latest error log and state you tried reinstalling all the redistributables incase of a missing library and still have the issue
one of the devs will respond during the week, i cant see your issue as you made it a private one 😄
well you've gotten more info here than the ticket i started
I'm trying to install the Contact DLC on the dev branch, but it does not work
I press the "Install DLC" button
It sits a while on "Downloading DLC Contact: 0% - 0.0 / 0.0 MB" for an inconsistent time
And then nothing happens, and I can press "Install DLC" again.
I have restarted Steam, my computer, etc.
Nothing has changed.
the optional part isn't released yet
the platform update with Contact's Livonia content, is installed as part of the base game
so you just run the game as normal to try that part of the DLC
Ok, thanks
I had a similar issue as I assumed the map was available to try in the dev branch but I haven't been able to play around on it in the editor
@hollow urchin
So i've had to ditch a mod on our server since the update because it couldn't deliver the mod details to anyone browsing for it. I'm guessing the contact dlc just added to the size of the query.
Is this ever going to be properly addressed?
@knotty steppe how many mods do you have and did you edit the mods.cpp yet?
27, mostly bloated by compatibility mods. I've messed with mods.cpp before, but that often results in the launcher not being able to point the user to the correct workshop item.
Why this feature of the launcher even references the mod by name instead of by its numerical ID is beyond me.
Or rather, determine the name and other information of the mod from the ID.
Hey there, I'm not entirely sure what's going on. But my Malwarebytes seems to often block the Arma3Launcher saying that it's a trojan.
That's a picture of it.
When I look up the IP that it's trying to connect to I get this.
I am very concerned and would like to know what's going on.
I actually get this alert from the arma3launcher.exe multiple times while I have the launcher open and the alerts often come from a few different IP's.
I am unsure on why this is happening.
I have checked the file on virustotal and it came up clean.
The hash is 34517d84742c33e36a9f81ab39dbeabde5a10e565833632354cf53e046d2e98e
arma3launcher.exe
Is this what it's supposed to be?
Generally it doesn't seem to be an issue but I am concerned for my security.
I had wondered if malwarebytes was preventing me from port forwarding properly but am cautious because of this.
malwarebytes is crap... simple as it is. use alternatives
if not, add the launcher to the whitelist
If virustotal says it's clean I would rather believe virustotal
Yeah but now I'm concerned as to what is trying to connect to that chinese ip?
Maybe the launcher is trying to connect to a chinese Arma server, to ask it how many players that server has playing right now, so it can tell you 0/60?
The Server browser shows Enoch instead of Livonia as map.https://i.imgur.com/dx4ZQGE.png
Whenever I load up my Arma III, from the launch application, I press play, my actual Arma III then loads up, starts loading, but freezes forever on Loading Core Configs and does not move. Anyone know how to fix this?
Dwarden answered someone with the same problem with this: this is most likely caused by cache.ch file (corrupt or similar) in root where arma3_x64.exe binary is erase just cache.ch file and run game again, the file will be re-generated
Still didn't work
Did you verify via Steam
I already tried that, and validated the files through steam
That is what I get
When it crashes
Have you tried clicking "play without mods" with the same result?
Hello when I try to launch arma from the launcher it show me this (launching the game just by "arma3.exe does work but I don't know if mod load like this) I tried without and with mod
Can you translate that error message to english for us? @azure grotto
The instruction at 0x40ef128c accesses memory at 0x00000000. The memory cannot be "read".
Press OK to terminate the program
aka Null pointer dereference 😃
aka Null pointer dereference :smiley:
Ah yes of course!
its a bobbity of the thingiflong
atleast thats what that sounds like to me
File a bug report here: https://feedback.bistudio.com/project/view/1/
And probably attach any .rpt or .mdmp files that have been created
There is no addons in the folder mode
i cant launch my mods
writes they are corrupted
and they size 0,0mb 😦
I played normally yesterday
Huh, I've never seen size referred to as weight
The small Arma 3 patch corrupted all my mods, any help would be greatly appreciated.
No. It is or was a Steam issue nothing to do with the patch. Repair them via the launcher if the issue is resolved (it might be cause I started ARMA 3 a little while ago and the mods look good)
oh
When we click to reload favorites servers in launcher, player count don't get updated?
I need to close and reopen the launcher to get servers player count updated.
So I started up arma today and it had a black box surrounding the launcher, just slightly larger than the launcher itself, and I can't edit any of my mods because it says the game is running. Most confused, pls help.
@elder dawn Try opening up task manager and closing any arma 3 related tasks
That was the first thing I tried, only the normal launcher though.
So I have all the CUP mods downloaded, and whenever I try to launch Arma, (while still in the launcher) it'll give me a warning message saying "CUP_afghan_config requires CUP_afghan_data". I tried reloading the mod but the problem is still persists. Any advice?
@vapid helm
Looks like CUP maps is corrupted. Redownload
All of my mods are stuck on not ready and will not I can not use them because of it
Let me try restarting steam
Nope still not working
Let me restart my pc
Still nothing
Let me try repairing all of thiem
Ok it looks like repairing is doing the trick
we're glad we could help you :)
what could cause this?
Cause what? @cinder surge
that's the leftover of a half-fixed crosspost @broken shard
Ah oky 
cause #headless_client
anybody knows how to fix your Arma 3 launcher from crashing?
Can you share some more info? @lilac basin
Everything works normaly, but when I press play it crashes instantly. It says arma2_x64.exe stoped working/code wasn't executed
arma2_64x
? @lilac basin
I don`t know
Try verifying your game files via steam @lilac basin
Do you have two hard drives
no
Were the mods steam subscribes or mods that you had to download then had to use “use local mod”
steam
So here’s the weird thing about the WS: when you subscribe to something...it obviously downloads. Now, when you unsubscribe from a mod, it does not delete the files of said mod(s). It only prevents you from using them.
So, do you know where you mod files for Arma are
no
also i checked and im unsubscribed from them all
but i dont know where the folder is
Ok, open your file explorer and select your hard drive (should be something like C drive, or D drive)
Click on the file that says workshop (which it not located where your games are located)
Imma head to my computer and look
sure ig
...\steamapps\common\Arma 3
steam_appid.txt - that gives you the number for the workshop folder (for me it's 107410).
...\steamapps\workshop\content\107410 - (<-what your app id number is) location of the workshop files.
Is it possible to disable DLC's, so I can test mods without the DLC present (so it would give the "buy now" pop-up, etc)?
@zinc depot not without disabling them in Steam. That's where you want to turn them off I think.
I keep getting an error 0x0000 dead messsage error and i cant find it on the community wiki or forum
even with no mods
try to verify the game files in Steam, because it sounds like a corrupted file (DEAD is usually given when something is missing or broken)
newbie here
I just got the game and was trying to play, but when I click join on any server or play, it doesn't do anything
any ideas?
Read #arma3_troubleshooting or #arma_battleye
Your antivirus is blocking battleye
interesting, thanks
@karmic storm could be there are mods you need to install b4 that specific server try official servers
Uhm.. @lost mesa that post is about a month old. And we already know what the cause was, it wasn't mods.
It was battleye exactly like I wrote above.
lol ok i didnt ser your post i didnt even look at the date i jus answered to the best of my ability thinking i was helping a fellow "newb" or "bambi" i had the same prob but now its all good @lyric elm
The launcher still switches languages after every update, even though the selected language never changes (in game's properties in Steam and even in the launcher itself). I have to change language in the launcher, select No when asked to restart the laucnher, select desired language and this time allow it to restart. Nothing game-breaking (launcher-breaking?), but a bit annoying, and it has been happening for as long as I can remember.
So Arma 3 has been giving me issues regarding a start up. It will simply drop a file containing a whole lot of text which states that the issue is "System.AccessViolationException: Attempted to read or write protected memory"
This brought stress and worry as I thought my RAM was the issue but I did run tests and no problems were found. I also did a fresh install which also didn't seem to help the problem.
No clue what's happening but it is quite frustrating.
Well, it does sound like a memory issue, even when it doesn't look like it.
Things like overclocking or wrong settings in your BIOS can also cause this, even when your sticks are completely fine.
It definitely does sound like NOT a memory issue but rather a CodeDoingWierdStuff issue...
I have kept my RAM as is, as well as not touching anything to do with overclocking
Got no clue how to fix it apart from formatting my hard drive
Well, it does sound like a memory issue, even when it doesn't look like it.
I don't understand why everyone jumps on that bullsh.
"Hey my Arma crashed"
"It is probably a hardware issue, try reinstalling windows, doing a full memtest, replace you ram and graphics card, maybe reseat your CPU"
WTF is wrong with people, its a simple software crash, of a game that is well known for being full of bugs. Why do people always jump to such nonsense?
Also doesn't the message tell you to grab the report and post it on the feedback tracker?
Because, this would be productive and helpful.
@lyric elm
Well sorry for stepping in your cereal this morning, but sometime advice is greater than just going off like that c:
Ontop of that I just joined yesterday as Forums and people have been 0 help with this error
Noone can really help you with the error, as it doesn't contain enough information to figure out what the cause is
Needs the full log. I think Arma launcher writes a crashdump right? A textfile?
I could take a look at it, but I doubt that I can figure it out. You probably need a developer to look at it, which you get (maaaybe) by creating a ticket on the feedback tracker.
basically I posted the message to get help, not to be made out to be an idiot for posting the incorrect info
Didn't see anyone saying you were posting incorrect info?
right next time i will just dump the entire text file for you
Maybe a moderator will actually offer to assist next time instead of the above :/
Thanks
I don't understand what the problem is
I am complaining about people who jump to nonsense conclusions instantly. Instead of trying to be helpful and asking for log files and more details to be able to figure out the real issue.
all good, posting it on the feedback tracker where you said, which is where i have posted previous problems, yet nothing :v
Tell me when its up, I'll take a look at it
Was
Do you have some time now to test out some stuff?
Do I need to delete all the mods?
And I have time. Been trying to start Arma as is , to the point of wanting to format my SSD as a method
Do I need to delete all the mods?
no
Go to Arma directory, and try just double clicking arma3_x64.exe, I assume that will start Arma to main menu and work fine
This will bypass the launcher?
yeah
in feedback tracker you listed
Reproducibility
Unable To Reproduce
But it sounds like you can always reproduce it
NO clue how
Well. Isn't it just "press play in launcher and it crashes" ?
ah~
Arma does start up when I click arma3_x64.exe
Its the launcher that isn't doing anything
Well thats a start, your arma is fine, which makes the memory issue (which the memory test showing no faults already ruled out anyway) even more unlikely 👀
I think in Arma folder, there is a arma3launcher.exe.config file? or some .config named file?
I don't know if its there or in my documents or elsewhere, don't have access to a Arma bearing computer right now
alright~
it shouldn't have any important data in it
then try if launcher works, if not. Go to arma directory, delete "Launcher" directory, the launcher exe, and anything else in the main arma folder that contains "launcher" or seems related.
Then go into steam, and let it verify your game files, it will redownload the files that it needs.
If still nope, go to My Documents/Arma 3
and see if there is anything launcher related there, Sadly cannot check myself what's in there, and I never use the Arma Launcher ^^
yeah
I will keep you updated, Just hoping this works
Ah that would be a No unfortunately, Still does the exact same thing even with removing the files
do you get mods from workshop?
as a alternative you could use a seperate tool to launch Arma, like Arma3Sync (it can also just launch the game without downloading mods)
yes I get them from the workshop
The only issue is the people i tend to play with throw a mod or two in.
So this could be a problem with mods. hmmm
Problem is, the Arma launcher creates links for mods in !Workshop folder, and you need them for other launchers to be able to load your mods
but. Your arma launcher works fine, you just need to launch it once, let it download and link workshop mods. Then you can use another launcher to actually start the game
although thats a quite annoying process, but it'll work for now
woah Hold up xD
holds down
So I dont need the launcher for the mods?
If you know the directory where the mods have been downloaded by steam, then technically no, you don't need it
steamapps/workshop/107410/complete
I think
But you only have ID numbers in there, I consider that "undoable" by someone not technically versed
or the launcher can decide to work as its supposed too D:
I got No clue how to fix this apart from a format
even then... it might not work
I'd attach a debugger to maybe get more error details, search for more potentially broken config files in My Documents or Appdata.
Its definitely some problem with your system, as the launcher starting arma has been well tested and works for tens of thousands of other people.
So some weird config error that got into a config file in whatever way, or some other software you have installed doing something bad
should i potentially do a clean up?
since my main files are on my other hard drives ?
not sure what you mean by clean up, I wouldn't know what software could be causing issues in that case
basically formatting my SSD
If thats an option for you, you could try. But it would be too much effort to me, I'd just use another launcher or get me a batch script to launch the game like in the good ol Arma 2 days
hah, unfortunately when it comes to things not working as they are meant too and it giving issues that are unsolvable. yeah..format
It needs to work
The only thing I can think of right now is that you may have some corrupted system dlls that the launcher is trying to use
DLLS? Where on earth can i find those?
C:\windows\system32 and other "fun" places. Make sure you know what you're doing, though...
I got a friend who does that sorta stuff. Maaaaybe I will ask him what's going on
I accidently clicked Host Server on Arma Launcher and now when I click play with mods, all it does it load a dedicated server and fails. http://prntscr.com/q3wr6c I don't know what to do, about to smash my computer, I just wanna play Arma and this crap dedicated stuff keeps coming up, I can't load it. I need help.
@daring vale
no crossposting please. keep it to one channel and delete the other post. this just creates confusion. thanks
Do I post it here?
i think that's the best place, yes. delete your post in #arma3_questions then
Ok, do you know how to help?
no sorry, not out of my head. just give it a little and somebody will answer
not sure if correct channel, but is there a way to launch arma from the command line and tell it to connect to a specific server (if there is a way, then the follow on would be can we also automatically slot someone)? Context: I have a little desktop icon to launch arma with all of the proper context for things (e.g. mods)
@lyric elm forgive my density, but I'm not sure where this would be documented? searching here, can't find it
oh discord doesn't do markdown?
google "arma command line parameters"
alright, thanks, so can connect but can't pass a slot identifier so they would still have to slot up
correct
Funny that the search doesn't find that page. Maybe the - means "exclude", just like in google searches?
yeah, thats probably what it is
Will there ever be a launcher for Mac?
Does anyone know how to modify the language of the EXILE MOD?
@hybrid hemlock
a link to the exile discord should be in #channel_invites_list
best to ask there
Thank you
How to play rp in arma
by pretending you're someone else?
or by finding an RP server, most likely sign up on their website, get the mods required, join the server and start playing
anyone know why when I click read all on the Arma 3 launcher, every time I launch it, it keeps marking it as unread
Anyone?
hi guys do you suggest anny startup parameters to improve FPS in game ? High-end pc over here
if you really want to boost FPS, -noSound
but this would be counter productive to your gaming experience
the best you can get is, use the ingame autodetection settings for video
I tried this last night. I usually run 30-60 fps depending on server and what's going on in the area.. after I did this I was running 100+fps in open areas and 50-70 fps in cities and around alot of stuff ..
https://youtu.be/s8OVwR4K3aY
@hollow urchin ^^
hi man
Sry I meant to tag you in my first post lol
But ya I didn't notice any visual change or anything.. but it definitely have me higher fps.. I used to lag hard core in pygros on Olympus server.. now I lag for a sec then jumps up to about 30 fps. Same in kavala
#hardware_vs_arma GUYS since I have a 144hz monitor with gsync, do I need to set Vsync On in game or OFF? and ON or OFF in NVCP?
THANKs @wispy prism
No problem bud..
i will take a look @it when @home
can't do nothing right now cuz I am @work :/
mavrick what's your specs
Hey guys, any1 out there able to help me with this performance executeable thing?
whats the prob @plucky gorge
@lyric elm I heard there was an executable file that gives a performance boost, thats what im after.
doesn't exist
there is the performance build, but its just called that, it doesn't give a magic performance boost
Seeing nothing, I assume this is resolved?
yep someone toke care of it. ty
I'm looking for guidance on making the launcher recommend mods to users that they dont have
I understand that mods that are listed with the -mods param are shown as content required by server, and are also ran on the server.
Can I get the server to make a mod "required" without actually running it on the server, for instance, client side mods
nope
only if you add the "client side" mods to your -mods also
meaning, uploading them to your server
thanks for the help, what does the server do with client side mods?, it might sound silly to ask this question, but for instance does putting a sound enhancement mod on a server make it load the sound files, even if it wont play them, and raise ram usage on the server?
It might load the files, but servers usually run -nosound param and won't "play" sounds locally
thanks m8, ill try loading the client mods on the server and see what performance effect it has
👍
I understand that mods that are listed with the -mods param
They are not though.
The parameter is-mod
Seems the profiles server has been down all day? Have not been able to refresh my units profiles through launcher all day.
correct
is that a BIS thing? any ideas when it might come back?
soon™️
Profile related question, and I'm asking as I haven't had this issue in quite some time. Had to edit my profile name in-game to reflect a promotion within a unit, and I thought I had set the launcher up to run with the new profile, but now whenever I load with the new profile name parameter it actually 'creates' a brand new profile every time.
And then the new profile is then visible in the profile drop-down menu.
Meaning that whenever I load into the game proper, I get the new "welcome to arma" message and my menu sizing options are all screwed up.
@prime fossil its saturday. People usually don't work on weekends here
its saturday
Looks at his calendar 🤔
it. eh. Maybe i meant weekend
@lyric elm sure I appreciate that. it was not a demand, bring it back up; it was an ask, any ideas with an ETA. sounds like later this weekend. thanks.
sounds like later this weekend
You apparently didn't understand what i told you. Its weekend, people don't work on weekend.
appears like it is back up today.
I have a youestion about Arma3 tools.When I try to turn on the Terrein builder I always go back to the steam.
Terrein builder
that's a terrain question. best asked in #arma3_terrain
THX
Launcher continuously subscribes to mods that I import from a html mod pack file - nothing actually happening
It's been subscribing for about an hour now.
I've tried restarting the launcher and I've also tried restarting the PC.
I did an internet test - there's nothing wrong with the internet.
Eventually the "subscribing" message would disappear and the entire launcher would become unresponsive making that unique Windows sound when you click anywhere in the launcher.
Any help?
try checking logs in steam folder and A3 launcher folder
hi
how can you play arma 3 and others battleye games?????????
can someone help me
i have win 10 pro, i bought arma3 , pubg
and i cant play these games
everytime i run i vave blue screen
i run arma3 launcher , then hit play and BLUE SCREEN
i have fresh install win 10 pro , update all drivers and still the same
you know i try to fix this 2 weeks
i paid over 80$ for the game
and i cant play
i wrote to official batteye support
and they dont help
I remember there were issue with BE when you were in the windows "fast track" or something like this (the one where you get the preview version of win10 that is not yet delivered to regular users)
its billion "google sites " about this problem
and no one can help
why battleye cant just works with win 10?????????
why
i have legal win 10 pro , legal games and still cant play
Have you even read what I've written to you?
yes
So the question was: do you have a prerelease version of windows bound to your windows user account?
Probably. I don't know, as I'm not using that. I guess that if you have opted-in you should know that you did this. Otherwise, the answer is probably "you're not in the insider program"
Done.
Profanity ? I dont understand.
it means cursing etc
@[Bandit78] Wojciech Kruk#6405 has the game ever worked in the past on that machine?
units server is down
still down
BI will announce once units is back up. Patience....
I wonder when will they fix DayZ Standalone
This is Arma Discord.
You're looking for #arma3_troubleshooting Bravo2020
ok thanks
The units server is down... again.
And you are in the wrong channel, see #community_units
How does one use a custom malloc now with the launcher, got it dropped in dll folder but only 3 pulldowns show up and the custom one not one of them. no rush was curious after finding one unless the large pages option basically made it redundant/obsolete in terms of using memory pages of 2048kB instead of 4.
if you restart the launcher after adding it, i would expect it to auto detect it and display it
nah it wasnt why I asked even tried naming it as custom. something going by the biki page
was looking at tom's custom malloc but its old might even be obsolete now.. not sure
Something wrong with the launcher? For the passed few weeks my unit information hasn’t been loading..
unit server is down it seems @cobalt creek
Ok, thanks
Hello, I tried to send in a request via the support page and it gave me an error so I decided to send it here
I have been trying to troubleshoot this for the past day. I keep getting this error upon launch. I have tried to use all the troubleshooting steps on the support page to no avail. And have even gone to the point of re-installing the entire OS
Aaand I can't send pictures
It is error code 0xC0000135 - Status DLL NOT FOUND
reinstall DX
Already did, completely uninstalled both 64 and 32 bit
Restarted, and then re-installed
Once again, I have gone through everything on that page
and what does dependancy walker say?
also you can get a screenshot of your whole display anytime hitting printscr then just paste into paint then you can crop out the bs/private stuff
I know, I just can't post any pictures in here. I don't have the permissions
Apparently
you'd have to put it on like imgur and link it or etc..
run dependency walker on whats not running if the launcher isnt opening then run it on that exe/com if its arma itself then on that. look for whats red like in the instructions.
I've run dependency walker on the Arma x64. I'll link that in a second once I figure out how imgur works
basically just make a account then hit 'new post'
From what im looking at it looks like 90% of the DLLs that are API-MS-WIN-CORE, are missing
Aswell as 4 directx DLLs even though I've re-installed it 4 times
link for DX you installing?
I mean odd regardless DX included since Win7 as part of the os. and the DX runtime installer flat out says doenst change your windows OS installed directX in any way... just additional files
yeah I dont see a DL link for dx in there, what does dxdiag report if anything?
And im running win10
its part of win10 actually cant even be removed its a core component of 10.
It's reporting no issues across the board, as it did
https://www.microsoft.com/en-us/download/details.aspx?id=35 << only official link I could find but again if its core DLL's there something more then the game at fault... just google missing API-MS-WIN-CORE and you'll see what I mean.
based on what you saying Im leaning this is more of a possible OS corruption/install problem not Arma specific. so not much more can do other then suggest looking at ways to verify your OS install now.
I'm about to just downgrade to win7 and do a complete wipe of the system just to see if that will work
and do not install any BS 3rd party fix tools. might as well ask to get hacked. only use official MS stuff or what they say to use.
Running it now, and I never do. Only follow official support
its okay just had to say it for disclosure sake... 😅
Yeah, you're good. I used to work as IT so I get the precautions. You deal with some pretty stupid people.
lol then you know exactly why...
Running the sfc now. Last time I went through this I didn't know about the DISM
I really hope this works
same sounds like ya in a tough choice position...
Dude I'm surprised I haven't had a full on brain aneurysm from the past 24 hours of trying to figure this out
No errors found. Going to restart and see if Arma launches
would def do a full AV/malware exam also.
hmmm Im outta ideas to help then doubt its arma and they calling dll's by the wrong name cuz it be a global problem. might be a worst case scenario here and the OS is fubar.
Yep
I'm doing a complete wipe and moving to windows 7 see if that works
From there. If it doesn't. I quit
I'll just get a new PC
what install of win10 do you have is it a upgrade?
Not sure, got this for free because I fixed my buddies other PC that he replaced this one with. Had to do an OS recovery and all to get it working.
I'm assuming it's just corrupt
ah.. possibly I would then just clean install a OS (7 or 10)
Yeah, that's what I'm about to do. Got any good links for either that you know of?
nah mine are digital keys so I just log into microsoft itself
Beforehand I'm just going to see if installing the latest windows 10 update works
yeah exaust all options first
IT WORKED
yep been happening for few weeks now... units is beta and is not guaranteed
I recently moved my Arma 3 install folder from the C: to F: drives (onto a new M2 drive). When I try to run Arma from A3 launcher now it simply freezes such that I need to kill the program in Task manager. I am guessing a path used by Arma3Launcher was not updated but, anyway, any clues about how to fix this would be great!
how did you move it?
Using the move folder option in properties\local files in steam
I was just trying to free up space on the C: drive, a constant battle as its an older SSD
i think smth went wrong with the file moving. best would be reinstall
Thank you, I will give that a try and report back either way.
I uninstalled, deleted the steam download cache, repaired the install directory and still have the same issue .. digging deeper I guess
checking your RPT file would likely be the first thing should be doing.. see 'why' its crashing.
good suggestion. I looked through everything I could find for the launcher but there are no crash logs, including appdata. I've uninstalled steam, cleaned the registry of anything steam, bohemia or arma related and am retrying
I am honestly not sure where else to look for arma3launcher logs. the appdata\local file has a bunch of json files but nothing reporting an error that I could see. There is a logs subdirectory but that was not informative.
after you get everything in, see if arma itself will run directly ie. just see if it loads without issue.
I had this issue once before when I tried to move from one drive to another and it was corrected by returning arma to its original location.
Will do sycholic, thank you for the suggestion.
C:\Users\<usernamehere>\AppData\Local\Arma 3 Launcher vs Arma 3 folder for the game itself.
yes I saw that and perused the files therein. More to come in a bit, and thank you again for the suggestions.
last resort, move the folder to a zip (ie. save it but get it out of there) let arma build a new folder and configs/settings for the launcher. dont believe uninstalling even removes those.
if that fixes it then ya good, if not then you can put the original back...
There is one folder in appdata\local I missed call Bohemia_interactive with subfolders for arma3launcher and dayzLauncher. That seems to be an XML file with configuration information. The only path I see is for some mods.
could do the same/ save-backup and force it to make it anew.. but not sure on that one the one I named looks like where all the cfg's are done.
The reinstall is complete. I can run arma.exe or arma_x64.exe fine. The launcher still freezes as far as I can see. More investigating to come.
hey! i got this problem when i launch arma 3
any help?
0xC0000094-STATUS_INTEGER_DIVIDE_BY_ZERO
@violet stump #arma3_troubleshooting
Deviding by zero isn't very good
Can you somehow force a loadorder for your mods on this? I'm about 80% sure one of my mods is being overwritten by the new DLC and I want to load it after everything else
overwritten by the new DLC? unless you have something very strange in your mod it should always load after the core game
its the only explanation I can come up with, I've exhausted almsot every other option I can think of
it's most likely an issue in your configs, or you try to do something which isn't possible
I can 100% believe it to be a config issue, but after over 10 hours of messing with it I can't find the cause of it, and the only signs I've found seem to point at it being overwritten by something else, and the base game is the only thing that could be doing it.
what other way could I set up four identical sets of code and get 3 different results, that all reset to be identical again?
perhaps you can give a more detailed explanation of the issue you have on #arma3_config
i already did. So is there no way to force a loadorder?
loadorder is "forced" through requiredAddons, which is already needed to be able to get access to other addons
but... #arma3_config is still the best place to ask, since it has nothing to with the Launcher...
oh, alright
Waiting for Steam to download mod updates is not finishing (or starting for that matter)
Try the repair option or restart Arma/Arma launcher/Steam
been like this for a fee days
I ve done all the usual tacts
clear cache
verify files (well that Arma alone I suppose
Thought it might across the board with everyone
unsuscribed/resubscribed
you can try to check steam logs
Well I think I narrowed it down but I don't want to sound accusatory. I had 6 updates in the launcher so I unsubscribed from all, cleared the cache, verified game files, and put the updated (resubscribed) one at a time until all wen in without a hitch,.....except for Unsung Golf. I post a note on Steam. I downloaded the Unsung from the torrent and of course it works that way. I just have to keep an eye on updates, which don't happen to often anyway so I'm good
I tried to subscribe today again just to see if it would work but I get the same thing. My Steam Library "downloads says it's in que but doesn't go.
I'm experiencing problems running the latest JSRS with Arma 3 Epoch and would be grateful for any help or sanity check. I've run this server and JSRS for 5 years together without any issue.
If I add the latest JSRS key to my server root keys folder, the server shows on the default arma launcher as having no dlc or, requiring any mods. So, anyone joining through the default launcher will be kicked for not running Epoch mod. If I remove the JSRS key and restart the server, then it shows the dlc and mods correctly in the launcher...
The a3launcher from maca shows the server requires epoch still, just the default arma launcher doesn't.
Also, I run 2 exile servers, they both have the same JSRS key in their root keys folder and the vanilla arma launcher shows all the required and optional mods correctly.... 😕
Hello everybody,
need your help and it is about the following problem. I have a Windows server on which Arma 3 runs with mods. All ports are released, but it is not displayed in the launcher in favorites and not in the history either. So that I can see him, I have to go to the internet first and then search for him. After that it will be displayed everywhere.
Now another problem when I am in-game and looking for the server in multiplayer and the Internet, it is not shown to me at all.
Please help and thank you for that 😊
greeting
is the windows server located at your home?
no the server is in the data center France
Now another problem when I am in-game and looking for the server in multiplayer and the Internet, it is not shown to me at all.
The way the in-game browser finds servers is by getting all the available servers and individually checking every single one if they match your description.
Start the search for your server and leave it like that for 5 minutes (and I'm not joking!) and check if it still doesn't show up
Additionally, if you have a low quality router at home (as it turned out I had), pinging all the 5k servers out there may literally break your internet connection (the router stops establishing new connections after ~1k connections established).
This will result in you being unable to open a new web page, for example (so if you still can do that, it's not the problem) and will miss all the servers that the launcher wanted to check during that time.
To fix that (but only if you have that problem, obviously!) you can change the number of connections per minute in Steam settings, but then it will make the server finding take even longer
My Arma 3 workshop mods won't update or download anymore, does anyone know how to fix this issue?
All the mods have the little yellow clock saying they need to be downloaded but the download never starts. I restarted arma, the download, finished all other updates for all my games, and restarted my computer. The issue hasn't gone away.
Steam downloads says there’s an update but when i que it, it just moves back down to needing to download.
List of things I have tried already
1.Restarting computer
2.Restarting Arma
3.Clearing download cache
4.Changing download region
5.Running steam in admin
6.Verify game files
7.Moving mods cache/download location folder
8.Restarting steam
9.Repairng mod on arma 3 launcher
Make sure Arma 3 Launcher is closed and try to start the update in Steam manually.
And make sure you have enough space for the files which need to be downloaded
I have 300gb of space, more than enough and i've tried that as well.
Simple question: is there any way to sort alphabetically the loaded/activated mods in the launcher?
since the "Available mods" are alphatically sorted, shouldn't be hard even to implement in some future update? I feel it could be a big QoL improvement
Great, after deleting all my mods I had downloaded to do clean up of my modlist. Then after importing all the presets I had Arma 3 stopped to download mods.
If I try to get it to start downloading it immediately moves back to "update needed".
Other downloads work I have tried to verify the gamefiles multiple times.
reinstalling the game seems to have fixed the issue.
heh did you try purging the steam download cache?
there's an option in steam settings dialog for it
so, how did you guys fixed the update required thing for the workshop stuff?
Half my unit is having this problem 😦
if you mean the missing files error:
https://www.reddit.com/r/arma/comments/gcwqty/psa_fix_for_steam_workshop_bug_missing_downloaded/
hello can any one help with launcher progblem just bouhgt it
noone can help if you don't say what your problem is
i cant start the launcher
i try lauching the game tru steam
And what is happened? The launcher didn't started and what else?
it pops up erore
Now just show us the error
il send in dm
wont let me
You can type the errors, instead of posting image
ok
unexpected errore could not load fille or asembley system.xmal versoin 4.0.0.0 ceulreul=naturel publice tokenb77a5c561934e089 or one dependeis the module was expexted to have an asembley manefest
details are stored in text file on your desktop
My?
no my
https://dotnet.microsoft.com/download/dotnet-framework/net48 you want the runtime
windows 10 should automatically have that installed so.. your error is weird
can you help me fix it
uh
Just download and install it?
ok
He can't control your desktop...
And no don't send me a friend request and crosspost into my DMs.
I don't help people that just want to annoy me, good luck
remote arma 3 support #when
*hello sir yes please download anydesk, you'll have to pay us in steam giftcards"
i'd do that... for #350/h 😄
Good day, what to write in external viewer in object builder dayz standalone, and then the software does not start
Wrong server
@hollow urchin
dayz server invite can be found here #channel_invites_list
good
Hello, I have a problem. When he subscribes to mods from Steam Workshop. Not all files want to download. Why?
And when i download all files Steam say me: No Downloads Files
"missing downloaded files" -> discord search
Hello, I'm having a small issue regarding downloading mods in ArmA3Sync from a repository, if i select a big amount of mods (addons inside each mod) it downloads at a very slow speed and most of the time stops in the middle of the download. What i found a quick solution is to download addon per addon especially the big ones, is there a way to fix this other than selecting each one to download it?
seems like the server where the repo is hosted just has a weak setting / connection
Okay thank you
you can still sub to the mods on the steam workshop and point your A3S to the workshop folders. i should recognize the WS mods and skip them when updating the A3S repo
as long as the mods on the repo are the same ofc
Ah thats a good idea I might try it, appreciate the help
hello, when I open the launcher in arma 3, I get this error message saying I have corrupted settings and It needed to reset them back to default
Oki
@hollow urchin go into steam, right click arma, properties, local files, validate game file
s
0x0000dead error what we can help please
0x0000DEAD is really common so more information is needed to solve
Exception code: 0000DEAD at FD77B87D
01/06/2020
ErrorMessage: File C:\Users\Documents\Arma 3 - Other Profiles\ben%20azur\ben%20azur.Arma3Profile, line 0: '.': 'â' encountered instead of '='
Then look into C:\Users\Documents\Arma 3 - Other Profiles\ben%20azur\ben%20azur.Arma3Profile, there may be unwelcomed â character
Error context [P-×-
Also I'm not asking the date, I'm asking what was the situation of crash
Error context [P-×-
What do you mean? Without context this sentence does not help you to solve...
probably need to delete that corrupt file
How create this choice in Arma 3 Launcher when you can select website?
https://cdn.discordapp.com/attachments/433918792796733442/722148130681782293/Screenshot_1408.png
Huh... never seen that
I have a weird problem
I was trying a tool to start dedicated servers
but it somehow made all my currently active mods to become corrupted
they are all installed, but apparently the symlinks are broken
I deleted all the symlinks, and when I restart the launcher, most symlinks are recreated, but those mods that were active are still corrupted. The message says "The path for the mod folder is not set"
I don't want to redownload all my mods, anybody knows where these paths are stored?
I need to fix them so the launcher can recreate the symlinks
nvm it just started downloading everything ffs
My mate is trying to launch Arma for the first time, and his account is not connecting with his Steam, whenever he clicks the Steam icon on the Login screen it goes through the process of steam login but goes no further and doesn't have the account connect properly. As if it didn't work
@unique plume if they cannot login to Steam, then they should probably follow the Steam guide for that issue: https://help.steampowered.com/en/wizard/HelpWithSteamIssue/?issueid=706
Hey guys, I'm trying to launch my game with the four RHS mods but for some reason TFAR is launching with it as well, despite it clearly not being in the loaded mods list. Has anyone had a similar issue before?
I do use TFAR when playing with my group but I get kicked from this server for having it loaded. I've made sure countless times that in the Arma launcher under Mods, I only load the RHS mods
Yet when launching the game TFAR complains that CBA isn't loaded meaning it launches with the game, despite me not wanting it to
Check both your MODS and also PARAMETERS tabs, in the launcher, because there is a "mods" parameter in PARAMETERS that lets you load additional mods, for example
Also make sure you don't have extra pbo files (like TFAR files) in Arma 3\Addons that you put there once, by mistake, and forgot about them
That's the one, thank you so much!
👍
Arma launcher start downloading mods (100+gb) again.
!Workshop had all my mods.
I tried to do:
Stop downloading
Restart Launcher
Restart Steam
Verify Integrity of Game Files
Clear download cache
(After this everything in !Workshop folder dissappeared)
Now i have all mods in C:\Program Files (x86)\Steam\steamapps\workshop\content\107410 .
!Workshop folder is now empty
Unfortunately, it "just happens" sometimes. I've had this happen to me twice or thrice, a few of my friends also had it
^ me too
Arma launcher start downloading mods (100+gb) again.
Was it the arma launcher downloading the mods or Steam. There is a known Steam bug that occasionally does that.
I just want to ask before raise a ticket, am I the only one who wanted to see an option to launch diag exe in Launcher > Parameters > Platform? Without Launcher, it's kinda hard to write settings into my bat file to launch diag exe
launcher already detects dev branch right?
Yes, but there's nothing more than
Default (64-bit)
32-bit
64-bit
in Platform option
might be just about perfect timing for that.. or rather a week late but still soon enough
So, I can expect something? 🙂
i made a ticket
Thanks!
you mean installing&managing branches in A3 launchers itself? 😮 😛
Most likely just the executables, not the branches
platform is executable yeah
I just want to ask before raise a ticket, am I the only one who wanted to see an option to launch diag exe in Launcher > Parameters > Platform? Without Launcher, it's kinda hard to write settings into my bat file to launch diag exe
yes, I needed this on several occasions, and always had to recall how to write the commandline 😦
I think it's only thing missing from launcher at this point 🙂
Has the width of mod list scroll bar ever bothered anyone besides me? It looks way too narrow to me.
Always hard to hit it.
never noticed it... I either use my scroll wheel or use the search function 🤷♂️
Sometimes when I try to connect to my server through launcher, the game doesn't start and the launcher just closes itself. Is there a log somewhere I can see to check what's going on?
%appdata%\Local\Arma 3 Launcher\Logs @feral raven
ok Ill see there when it happens again, thx
There is no such folder @turbid brook 😦
Uuuh... well there is one on my computer 😄
When I try to open the launcher and click play it loads but then stops. I’ve uninstalled arma 3 and reinstalled it. I’ve restarted my computer and some other things. I only have a play time of 2 hours and I don’t know what the problem is. Can anyone help?
@feral raven are you sure you're looking into Local? Because Afair windows takes you to Roaming when you type %appdata%
maybe it's better off in this channel?
I have an issue with my launcher that I can't figure out. Every time I open the launcher, it defaults to old setings and a previous set of mods I haven't used in a while. nothing is saved, there is no persistence, it always reverts to old parameters and mods. I've tried everything I can think of, and not even the more experienced people in my other discord are able to help. I've tried reinstalling Arma, verifying game files, changing settings, deleted the Launcher fold in the Arma directory, and I can't think of anything else.
i need help ;-; whenever i try to launch the game its always telling me the status_dll wasnt found
and i dont know what to do
have you verified the game files?
yeah i have
I'm guessing it didn't find any missing files?
no, i tried everything on the wiki and it still doesnt work 😦
hmmm
STATUS_DLL_NOT_FOUND
i tried all of those things and it still won't work
Did you reinstall DirectX or something, and relaunch your computer?
i did reinstall it but haven't relaunched my computer yet
Better try before proceed I guess
yeah, it says i have DirectX12, is that suitable to run it?
I think Arma 3 had DX11 IIRC?
so that's the problem then?
it's backwards compatible
Ohh ok, well I’m restating my computer now
but after installing any drivers you are required to restart your computer, otherwise files won't be loaded and can't be accessed.
So after restarting it should work just fine?
Maybe
Damn. Did you do every suggested solution for sure?
i need help with my launcher. its pretty detailed and so far no one knows how to fix my problem. when i load arma 3 the loading screen get stucks and wont load. so im wondering if anyone can add me so i can get in a call with them and explain a little further.
One don't need to add to explain further
ok well i have no idea what to do
and i just wanna get arma fixed so i didnt waste $43
Do these posts explained further?
eh sort of it gives just the main problem
but if i joined in a call i could give details on what happened prior to see if that had to do with my arma messing up
Well, posting the RPT file (error log) would give us a lot of info already.
And a couple of standard questions you should be able to answer:
- do you get an error message?
- does it also happen without mods loading?
- did you Verify Game File Integrity in Steam?
- are all drivers (GPU, etc.) up-to-date?
- do you have at least Visual Studio 2013 (VC++ 12.0) installed?
- well only when i click on the launcher after it not loading i do im not sure if it would be a error message.
2.i dont have any mods installed
3.yes
4.yes i just got this pc 2 weeks ago
- no
i have an exit code. does that mean anything?
yes, a lot
screenshot and put it on imgur please
or any other image hoster
um ok ill need to figure out how to do it
windows snipping tool
please do a screenshot
alright
like that?
this is my first pc ever and i just got it 2 weeks ago so im learning sorry about that
might or might not work...:
close the launcher
close steam
go to you documents folder
back up the arma 3 folder
after backup, go into the arma 3 folder
delete <yourname>.vars.Arma3.Profile
restart the game
ok let me try
@fossil roost
any news?
did you ever alter any launcher parameters?
not that i can remember. in game my name was something i didnt want it to be so i made a new profile or something like that
well... my last idea...
uninstall arma. delete all leftovers manually, like ..\documents\arma 3
and
C:\Users\<yourname>\AppData\Local\Arma 3
then reinstall the game
btw, what are your PC specs?
(CPU, RAM, GPU)
for cpu i have a Intel(r) core(TM) i7-8700 cpu @ g 20GHz
gpu i have a NVIDIA GeForce GTX 1050
installed ram i have 16GB
sorry it took a while
ok... just wanted to make sure your hardware can even run arma. yes, it does
as said before, a fresh install is my last idea
maybe. click on the more details button and make a new screenshot
open task manager and see if any arma related tasks are running
only discord and steam client
restart your PC and keep deleting
He mentioned in 5) that Visual C++ 2013 redistributables are not installed. Which is prerequisite. And a new install of the pc likely doesn't have it yet. So go and install this: https://www.microsoft.com/en-us/download/details.aspx?id=40784
Ok thanks
Which one should I download?
Just click Download?
But it gives me 3 options
Depends on your OS, 64 bit or 32 bit?
64bit if you run 64bit arma which you should nowadays
Aren't these redistributables installed automatically when installing Arma or BattlEye? 🤔
I remember that something was being additionally installed
when you launch arma on steam they should be
but for whatever reason it doesn't work for some people
well i downloaded it and it still didnt work. but thanks for helping everyone.
How does launcher choose which mod to suggest to be loaded? By meta.cpp or by what exactly?
I have main and dev builds of my mod and for my server it always suggests the main branch mod although it is running the dev branch
Both are at workshop
it checks the -mod parameter (required) and available keys (optional) on the server (afaik)
not sure how it detects the version, should be meta.cpp, but I'm not sure
Not sure if I understood correctly but try signing the dev and main version with different keys @feral raven
they have different keys (generated at each build by CI)
they have same meta.cpp pointing to main branch for both though... because I made it manually.
that's why I ask 🙂
Just to be extra sure: your key file name is different, not only the contents of the file, right?
meta.cpp connects the mod to the workshop, so if you have the dev version pointing to the stable version on steam, the Launcher will always display the stable version
meta.cpp connects the mod to the workshop, so if you have the dev version pointing to the stable version on steam, the Launcher will always display the stable version
Ok, that's what I wanted to confirm, thanks
well i downloaded it and it still didnt work. but thanks for helping everyone.
@fossil roost Well, you also need to execute it. Make sure it is in the installed Apps and Features (Windows 8/10 settings) or Programs and Features in the Control Panel.
what do you mean by execute?
Ummmm... He means you should run the installer you downloaded 😜
👀 he clearly he means that you should put the installer in front of a firing squad for not working (/s)
how would i go about accepting the eula again because i accidentally closed out of it and now when i try to join a server i immediately get kicked
it should just ask again I think
someone help me to solve an error that I get when starting my server from TADST
the application was unable to start correctly 0xc000007b clicl ok to close the application
plz
easy... once people have an idea, they will respond to you. no need to bump
@light hull https://steamcommunity.com/app/107410/discussions/1/1319962683449056224/ take a look at this