@round lance When the distance between two players is more than 750 meters, they can not see each other.
#arma3_troubleshooting
hollow rain
round lance
that should be object visibility in the graphics settings.
it also depends on some things
for example arma has features where the further something is away, the more it is "sunken into the ground"
try using some view distance mod if it's a private server, see if it changes anything.
hollow rain
@round lance Some people say it's related to in-game difficulty (related configuration in server. cfg)
hollow rain
@round lance tks
round lance
there is however a setup you can do on server.cfg that can allow higher view distance
how you do it, however, i do not know.
hollow rain
difficulty = "Regular"; // "Recruit", "Regular", "Veteran","Custom" change it in server.cfg?
terse plaza
round lance
that's...not gonna change anything in regards to visibility.
fringe salmon
I'm having a problem where modded factions won't load i've tried reinstalling them, making sure they're updated, exiting zues then going back in multiple times, and remoting controlling then going into zues this is only happening with the factions not the weapons clothes etc.... from the mod as they're visible in the arsenal. Can anyone help?
grim tinsel
What do you mean with 'wont load' @fringe salmon
Do you mean in the zeus interface?
If so make sure that you've enabled unofficial addons in the game master module
fringe salmon
Yes the Zues interface, and i've made sure the module has unoffical addons enabled
fringe salmon
Zombies and Demons
wise barn
never used it. it could be that this mod was never set up for zeus
fringe salmon
I've seen it used in zues before though, and i've had the same problem with RHSUSAF
patent sparrow
Has anybody ever had a problem with getting ai squad members to get in a vehicle?
In fact they pretty much won't do anything I tell them
fringe salmon
Are you remote controlling a unit?
grim tinsel
Z&D should work fine with zeus
fringe salmon
This is all the mods I have on right now.
-mod=@CBA_A3;@ace;@Achilles;@Advanced_AI_Command;@Zeus_Enhanced;@Zombies_and_Demons;
patent sparrow
No
static scroll
currently im having an issuse where when i import my terrain thru pbo project its fine, then when i load in game i dont see the map
fringe salmon
quick question, in my ArmA 2, it runs great, buuut when i am moving forward some places certain vertexs and shapes in the terrain move with my vision?
What is this?
Like its always right in front of me too. I have most stuff maxed out.
uncut trellis
@static scroll #arma3_terrain
fringe salmon
Ok I think I found the source of my problem when I make a mission with addons then upload it to the server it won't load, but if I upload it without any addons it loads the mission on the server. I know for sure the server has all the addons, and they're working properly before the upload.
hollow rain
10:12:48 House c1d6ba3580# 1813824: nav_pier_m_f.p3d (to) not found in the operative map
10:12:49 House not found in the list
i dont know what's wrong..
uncut trellis
What's the error in and what's the context @hollow rain
pine hull
Decided to work on some new eden missions, but realised that the respawn points don't work at all? Copied/pasted old sets and tried aswell, still just spawns the character at the location of his death, the respawn selection map dosen't even show up, playing old mission files seems to work fine, new not.
grim tinsel
Did you adjust the settings in the attributes 
? @pine hull
pine hull
Yup
fringe salmon
I'm currently working on custom missions for my server, and it won't load as it says "Error Loading Mission" I have a mission.sqm file and the folder. Am I missing anything? I've looked around at tutorials and people with similar problems but I can't find anything.
orchid grove
How do I disable ACE addon mismatching on my server?
wise barn
by matching the versions
pine hull
@grim tinsel Yes custom position is put on, still dosen't work.
grim tinsel
Hm weird, any chance you can PM me a picture of your mp attributes screen? @pine hull
pine hull
I will later, at work.
quaint jewel
@fringe salmon any more details?
fringe salmon
I've looked through the mission folder where it saves it and there's only a mission.sqm and if I do it without addons then upload it to the server it works fine but if I do it with addons it doesn't.
quaint jewel
what is the full error you get
fringe salmon
I've checked the .rpt file and it says "Error Loading Mission".
quaint jewel
anything else?
fringe salmon
Nothing else
quaint jewel
then you cannot be helped
fringe salmon
Alright i'll try figure it out
signal pier
Addon 'Cup_AirVehicles_AN2' Requires addon 'CUP_Creatures_People_Civil_Chernarus'
Help please
grim tinsel
Make sure you have all the dependencies loaded @signal pier
grim tinsel
are you getting the error on your own machine or a dedicated server?
signal pier
dedicated
fringe salmon
Need help with server ethernet options please pm me Thanks (it relates to arma 3 it's our main server)
quaint jewel
@signal pier mods are corrupted. redownload them
wheat breach
Yeah I have a pretty weird problem, last night my launcher said my game was running even though it wasn't. I looked in task manager, processes, everything. So I restarted my computer and it still says the game is running, so I looked in the task manager's details and I found these but whenever I try to end them it says access denied
I'd love to post a picture here but for some reason I can't
uncut trellis
You can link to pictures
wheat breach
quaint jewel
Are you running antivirus?
quaint jewel
If you get access denied on these suspended processes it means someone with more rights than you took these processes and locked them for itself.
Antivirus might do such a thibg. I guess battleye might too.
wheat breach
I do see a BEService in my Services but it says its stopped and I also can't start it
When i try to start it it just immediatley goes back to stopped
quaint jewel
BE service starts itself when Arma is started with battleye enabled
what I find weird.. is that these arma3_x64.exe don't have an icon in task manager..
Can you enable the command line in task manager?
In details panel right click onto the "Name/PID/Status" header, select "select columns" and enable "commandline" or "imagepath" and check that these are really the arma3_x64.exe in your Arma folder
quaint jewel
🤔 weird then. Well as I said if you have antivirus software enabled it might be interfering with that
fallow swan
can't
gusty snow
Welp,shit
fallow swan
I pinged Dwarden
gusty snow
apparently multiple servers are having this issue
@gusty snow we take no action in this I’m pretty sure you know spectre well natho is the owner of it and apparently him and this person had a fight and his trying to cause as much trouble for multiple servers
owner rof the serrver being spammed said this
basically a guy is pissed off and wants to cause trouble for multiple servers
fallow swan
I thought so
I'm at work only on my mobile, so I can't even research any useful bot commands for mass control
gusty snow
F
quaint jewel
if you have info about the source of this please forward to moderators
austere scaffold
Anyone else getting this? Some people are, some aren't even though both type of people don't have contact dlc https://cdn.discordapp.com/attachments/543928329338617871/621412506405044250/unknown.png
not contact dlc items are present in the mission or placed down after init
grim tinsel
did this just happen once on one missionfile or on multiple ? @austere scaffold
quaint jewel
i read about links to solutions to that on BIF, but never looked at them
austere scaffold
Multiple
Same mission, different saves
as in redownloaded file
I could try renaming the mission and try again
Would you be able to link them pretty please @quaint jewel
austere scaffold
found it thanks
for future reference for others: https://www.mgtrolls.eu/forum/m/12045571/viewthread/31675231-fix-mission-terminated-because-dlc-content-required
pallid lava
hello, got a small problem in warlords (official server 00) , it seems like we can't select the enemy base, and our base lacks the blue square too.
past stream
So i just purchased the game and i'm getting horrible fps drops, i've got a i5-4690K and a 1060 6GB but i stay at 50 fps and when anything even something as moving my head happends it drops very lowe
And I currently have everything set to high
Even when turning the graphics down to standard the excact same thing happens
normal crest
@past stream 64-bit and SSD?
past stream
Yep on both
normal crest
okay, should be awesome then-- what scenario? Or map? Or is it just everywhere?
past stream
Pretty much everywhere
Even when doing the first VR test when first launching the game i get fine "idle" fps but very bad drops
normal crest
okay, that limits the possibilities a lot
past stream
Alright
normal crest
I'm gonna take a quick look around brb
past stream
Sweet, thanks
normal crest
Do you use Nvidia experience?
past stream
I do yeah, i tried optimizing it through there, same thing though
normal crest
and it has game-ready drivers installed up to date?
past stream
Yep yep
normal crest
which version, like APEX, Contact, base?
past stream
Base i belive
normal crest
does it have a 64-bit launcher?
past stream
Hmm don't know, It currently uses the 32 bit one
marsh pewter
Launcher > Parameters > Platform
past stream
Ah Alright
normal crest
okay, I know the base game had performance issues at 32 bit. Try updating to get the 64 bit launcher
past stream
Will do
normal crest
hope it works for ya, have fun!
round lance
it was already on 64-bit then?
normal crest
okay so it is launching 64-bit
past stream
Yeah
round lance
try setting up extra parameters
normal crest
scratches head
past stream
Alright
normal crest
is it a laptop?
round lance
just hover over things if you don't know what they mean.
it will give you a description.
past stream
Nope, PC @normal crest And yeah of course @round lance
normal crest
the reason I asked about laptop is the common dual video driver issue.
past stream
Hmm alright
normal crest
a user posted this on the forum but it seems a bit iffy for your situation,
"I have resolved the issue by setting maxmem to half of my physical RAM (8192) and increasing the OS pagefile to the same as my physical RAM (16384)."
normal crest
stock cooling?
past stream
Nope, proper air cooler
normal crest
hmmm
past stream
Yeah i'm pretty confused
normal crest
will you try running in a window to see if that changes anything?
past stream
Yeah sure , just gotta load into a mission real quick
Yeah setting the memory and such didnt help
normal crest
past stream
Hmm trying that
Alright changed the config file, booting the game up now
So i mean
It kinda helped
I still get from 40-60 fps but it dosen't freeze now atleast
normal crest
what is the view distance?
past stream
2200
normal crest
is that terrain or object?
past stream
Overall
normal crest
okay, so should be blazing fast
normal crest
now I wonder if it might not be better to turn that up a bit
try terrain at like 3-5k and keep objects at 2 or even go down to one
past stream
just made it worse
normal crest
okay, that's good to know. Change that back and try sampling at 80%
normal crest
Agreed
round lance
how much RAM do you have koala?
past stream
16GBs
past stream
Tried setting it to 8 and it didnt
normal crest
yeah if changing the memory helped maybe play with it a bit more
past stream
And changing the sampling to 80 and no change
normal crest
yeah, I don't think it's the GPU
round lance
are you overclocking?
past stream
Nope
Alright yeah, I gotta go now. I'll refund the game for now, appreciate the help though
I'll wait until the game has better optimization
That's my best bet
round lance
yep, cya.
past stream
Fair enough, yeah see ya
normal crest
I almost got rid of the 32-bit version because of performance but the 64-bit version runs like hot butter on this laptop
pallid lava
I have a bug where, when using the nightstalker or optics in a vehicle the game will zoom in as much as possible, without letting me zoom out
tried spamming zoom in, zoom out, unplugging controllers, restarting game and computer
tropic yarrow
Modded or vanilla
pallid lava
vanilla
also does it with other thermal optics , but didn't seem to bug with marksman/sniper scopes
tropic yarrow
Is it reproducable with the way you were describing above? I would make a ticket detailing affected scopes and provide possibly a scenario file that you use.
pallid lava
I will try it if it continues, ty
uncut trellis
Got any game controllers?
tropic yarrow
unplugging controllers
he's already tried unplugging them it seems
maybe arma needs a restart before detecting the absence of a controller?
pallid lava
I tried that one too
grim tinsel
@pallid lava Does it just zoom in all the way right when you get in?
pallid lava
it zooms all the way in whenever I try to aim
grim tinsel
So when you open the sight?
tropic yarrow
and you tried num plus and minus for zooming in and out?
pallid lava
yep, and yep too
trying to reproduce the bug in VR arsenal, but everything seems normal there
grim tinsel
Where did the error occur?
pallid lava
in warlords
uncut trellis
Perhaps needs a profile reset.
pallid lava
in the editor on the map altis it does come back.
ok, it seems using the mouse right click triggers the bug, I could work around and use only toggle aim. BUT a single click of the right mouse button will cause the bug to come back, and once it's there it's not going away for that vehicle/scope
gonna do the good old uninstall/reinstall
grim tinsel
Btw I just got the bug again where you get static instead of engine noise and the game crashes after a while, did anyone ever figure out what caused it?
grim tinsel
Yup
brave hawk
Hey there; I can't use Game Updater to get the DevBranch, once logged in the GU doesn't do anything - any ideas?
chrome current
Do you have Steam 2FA enabled? There were some issues with that.
chrome current
afaik GU isn't working with 2FA on, at least as of a couple months ago when I last tried.
hollow rain
https://sqfbin.com/vabofoyojirapemikojiExcuse me, what's the reason? I checked the RPT log and found no mistakes. Thank you!
grim tinsel
@hollow rain You forgot a space there
hollow rain
@grim tinsel Is it in life_server or task file? I really can't find the reason for that.
grim tinsel
Sorry, I meant in the message in this chat @hollow rain
the sqfbin link includes the 'Excuse' at the end
hollow rain
@grim tinsel Do you mean the problem is in sql?🌻
hollow rain
ok,but thanks a lot!
grim tinsel
shut vale
thanks, i should wear glasses lol
grim tinsel
Remember to delete the message here so it isnt crossposting 
@shut vale
crisp fjord
hollow rain
Hey, excuse me, how to write scripts. TXT of BE Rule Filter, because there are many hackers who cheat by script injection or other means, affecting the balance of the game, thank you!
regal canyon
alright so i like just bought the game and im doing the tutorial, and i like to hold down my mouse button to aim, but theres so many other button assignments that im not sure whats going on, could someone help?
round lance
@regal canyon while it would probably hinder your gameplay more than help it, there should be an "aim temporary" keybind of sorts in the weapons tab in controls settings.
round lance
Make sure to unbind zoom in temporary from the views category so it doesn't conflict.
hollow rain
Hello, I saw this in script. log in the BE folder on my server. https://sqfbin.com/biwihidaxatonupodobu
Excuse me, is this a record of cheating?
vestal yacht
That code sets a tooltip to a button on a GUI and set's an action to that same button. Could be cheating, could not be
hollow rain
@vestal yacht I've written 1 "buttonSetAction" in scripts. txt. I compared the records of all players, but only two players had such records.
vestal yacht
Still doesn't say much, you need a pretty good knowledge of the mission you're running to be abl to tell if it's scripting or not
hollow rain
thanks a lot!
tulip jewel
Hey guys i have some issues with my settings and i can't reach 60 FPS in warlord ! Is that normal ?
vestal yacht
Do you normally reach 60 FPS?
tulip jewel
Yeah on all recent games
vestal yacht
no I mean in arma
tulip jewel
Nope
That's so weird because i have an i5 7400 with GTX 970,16gb of RAM which is not bad at all !
wise barn
40ish FPS is pretty much the standard
pine talon
I've been having a problem with the audio of vehicles. While in first person, all is fine, and I can hear the rotors and other noise. As soon as I go into 3rd person, the rotor sound disappears until I free look left or right, or up or down. If the 3rd person camera is behind the helicopter or other aircraft, I hear no noise.
strong sail
Hey
Can anyone here help my friend with his PC not having permission to launch a file
arma3_x64.exe
It just says it doesn't have enough permission to launch it
regal canyon
me and my friend want to play together but we dont know how to get into a lobby/same server, how do?
round lance
Use the steam overlay, as you would with any other steam game @regal canyon
Or use the friends tab.
@strong sail run it as admin then.
regal canyon
i tried and it only said "invite to watch game"
strong sail
We did run it as a admin
round lance
Not invite, join.
@strong sail tell him to shut down steam, launch it as admin, and then try to run arma again.
strong sail
We tried that too
round lance
Is it his computer?
round lance
Try verifying game cache
uncut trellis
There's friends tab in the Arma launchers server list too.
round lance
^ yep
tulip anvil
Does anyone know how to prevent players from briefly appearing at their death location when they respawn? When a player dies the respawn menu layer opens and, after the respawn timer is done, the player selects a respawn location and clicks the respawn button. Upon clicking the respawn button the player (in vanilla gear) briefly (~0.5 s) appears at the location of death before being moved to the selected respawn location.
torn inlet
any one why tadst isnct connecting to arma server?
golden yoke
I'm trying to run a dedicated server with TADST, however it doesn't seem to be loading all my mods
lethal stone
'Hi. My server use ace mod as a must have mod. The thing is, we decided to use tank dlc's vehicles in our missions but it seems that if i load the ace mod, i cant find my dlc's vehicle in 3den. Merkava has the ace logo right next to it. Isn't it supposed to be Slammer instead?
even Rhino MGS is not available
how do i solve this?
quaint jewel
ACE gives the arma vehicles their real life names
they do that in the realistic names pbo
lethal stone
so it is still the same vehicle?
because i just noticed that the class name is the same
quaint jewel
yes
lethal stone
there's changes made in dlc right? like slammer have lower size barrel than merkava but better armor
if i put it in the editor, how would it affects player with dlc and those who dont?
golden yoke
Do I need to make a description.ext for MP mission on dedi?
lethal stone
@golden yoke better to use it for flexibility
quaint jewel
there's changes made in dlc right? like slammer have lower size barrel than merkava but better armor
no
if i put it in the editor, how would it affects player with dlc and those who dont?
Doesn't, besides the normal DLC restrictions
Do I need to make a description.ext for MP mission on dedi?
no
golden yoke
Weird I can't seem to join my dedi
.rpt shows a lot of BEServer: cannot find channel #927829158, users.card=0 and a lot of Server error: Player without identity Dpatt711 (id 927829158)
golden yoke
Besides that not really seeing anything standout for the server itself
6:21:52 SteamAPI initialization failed. Steam features won't be accessible!
Will that cause any issues or is that normal?
quaint jewel
normal
golden yoke
okay so definitely not my client, can connect to other servers fine
And this is my .bat
arma3server_x64.exe -port=2302 -world=empty -config=Server_Config.cfg -profiles=C:\Games\ArmA3\A3Master\Users -name=Server
Ports I have 2302-2306 UDP In/Out and 2344 TCP/UDP Out
quaint jewel
you have a firewall on outgoing connections?
maybe just try opening it
the server needs to contact steam services, maybe your firewall blocks that
golden yoke
Okay I'll try opening all the ports found here
https://support.steampowered.com/kb_article.php?ref=8571-GLVN-8711
quaint jewel
just try opening all outgoing ports
quaint jewel
maybe 32 bit will work
see absolutely no reason why that would make a difference
golden yoke
BE has different .dlls for 32 and 64 figured might as well
When I select server in browser I notice expansions show as this
https://i.imgur.com/zPO7RkZ.jpg
Is the server not loading things correctly or something?
heh
I'm an idiot
I forgot Windows firewall is a thing
I was only opening ports on the server provider CP
golden yoke
Now I just have to figure out why my mods won't load
.rpt makes it look like they loaded just fine, but in browser they don't show up under expansions and when I try to join it gives me the unsigned key error
grim tinsel
Unsigned key doesnt mean that the mods havent loaded @golden yoke
golden yoke
Or rather the "key is not part of a key accepted by server" or whatever message
grim tinsel
Did you put the mods .bikey files into the keys folder of the server?
golden yoke
I thought I shouldn't need for mods actually loaded on the server
quaint jewel
thought wrong
grim tinsel
golden yoke
yeah so I guess that works
just weird it doesn't show up in the expansions like other servers
Definitely is working though, because when I try to load it with the keys in, but mods not loaded it throws a fit
hasty vine
@tiny imp when the team post announcements in the #announcements room can you start pressing the "publish" button next to it, so that it cascades out to other discords that follow said announcement room.
Same applies to the Twitter room.
When someone follows the channel for announcements it isn't automatically cascaded to "followers" and their discords you've gotta select "publish"
cc @fading cloak
fading cloak
Nice!
I probably wont do it with the previous ones though, don't wanna spam everyone, but I'll definitely do it each time I do a new post now. Thanks for letting me know, I assume this is a new feature? Haven't seen it before :p
hasty vine
Yeh its a new feature, I'd try and keep things on topic though as it may get a little spammy as you say
I'd try to work out what people expect from each channel e.g. for dev announcements are they more interested in game updates or the blogs you guys also do
thats the tricky part 😛
supple crystal
Maybe a new channel should be made, dev_announcements should only be game update related stuff IMO
tulip jewel
Hey guys ! Can anyone tell me which settings in arma 3 have the most CPU cost ?
quaint jewel
viewdistance
sinful island
^ 100% and resolution (as it effects all graphic options). Also this one in general: https://i.imgur.com/7q1pyOv.png
quaint jewel
as it effects all graphic options
Resolution is GPU.
sinful island
I meant more that running a higher resolution means more hit for multiple other options, just like distance does.
tulip jewel
@sinful island laughed for this one :D i just wondered if it was possible to get a solid 50 FPS in KOTH
sinful island
Some have had some luck with this guide: https://steamcommunity.com/sharedfiles/filedetails/?id=1731305438
But depending on your hardware, it may just not be possible.
tulip jewel
OK thanks for helping 😀 i will see with this guide !
quaint jewel
I meant more that running a higher resolution means more hit for multiple other options, just like distance does.
yes but he asked specifically about CPU
fringe salmon
The big one is object visibility distance, overall view distance to a lesser extent. Compounding on those is object quality and terrain quality which also impact on the CPU. Bringing obj view distance down to 2k and the object and terrain quality on high can achieve decent FPS on a modern CPU assuming the mission is written well.
sinful island
Ah, yeah. I misread. Thanks Dedmen!
copper saffron
So for some reason when I switched wifi's, arma had to reinstall again along with all the mods. It was about 80 percent done downloading then my computer crashed and it caused all my mods to say they weren't downloaded. Now this is kinda getting annoying since it's about 170gb worth of memory I need to redownload every time the game does this crap.
quaint jewel
"the game does this crap"
no it doesn't.
Steam does.
copper saffron
Mmmm ok then steam. But is there any way to prevent this? Arma is the only game that has this issue.
delicate elm
Maybe Steam doesn't copy over any of the mods from their temporary download location to the workshop folder until all upgraded mods are downloaded. Doesn't make sense though... cause I see the green bar load option come up as each uploads... so thinking that the mod manifest is not updated.
golden yoke
Anybody know why all of a sudden my server seems to have stopped letting me connect
client just gets stuck on loading screen and server rpt just keeps getting spammed with "player with no identity"
Thing was it worked perfectly fine before
but I shut it down, restarted it, and now I can't connect
no changes to mods or config
no errors thrown on client rpt
golden yoke
no problems connecting to other servers
double checked hosts port settings and windows ports
tried leaving it connecting for 10+ minutes no luck
tried wiping the volume and doing full reinstall
and now it works
k
cloud yarrow
Hopeing for a solution.. i have a hotas setup but when ever i open a radio TFAR/ACRE2 or use CTAB / Ace selfinteract the throttle looses power and i have to close what ever im doing at move the throttle to regain power. does anyone know of a fix ?
winter drum
hi guys, im having issues hosting my squad xmls, they can be accessed online but arma said that it can not parse the file. even though it is seemingly configured correctly
could there be an issue if the port is defined in the url?
tulip anvil
Hill: Does anyone know how to prevent players from briefly appearing at their death location when they respawn? When a player dies the respawn menu layer opens and, after the respawn timer is done, the player selects a respawn location and clicks the respawn button. Upon clicking the respawn button the player (in vanilla gear) briefly (~0.5 s) appears at the location of death before being moved to the selected respawn location.
Lankercool: nope, it's how the system works. or at least how the vanilla respawn system does.
Which part of the respawn system is responsible?
quaint jewel
could there be an issue if the port is defined in the url?
Could be, never tried that I think.
it is seemingly configured correctly
is it really though?
vestal yacht
From what I can tell (so accessing it over the web via the link) he did configure it correctly
golden yoke
Huh weird
So I'm using AWS EC2 for my hosting
I got everything setup and working on a t2.medium
100% no issues
But when I change the instance to m5.large I get infinite loading screen and Player without identity error
Both are 1 phys core 2 vcore setups
RAM is 16gb instead of 4gb
Both use the same EBS volume
Reinstalled directx and visusl 2013 under the m5
stark patio
Hello all
I'm having a major issue with my scenario.
I'm getting "Error when loading scenario" message when I load it
Has someone had the issue recently?
Posts on internet are all very old
I check RPT file but nothing consistent
I reverted to an older version but same thing
Tried opening another one and didn't get any issue
sinful island
https://sqfbin.com or pastebin the RPT and link it here. Hard to tell just from that.
quaint jewel
we need rptbin.com
quaint jewel
optimized for huge amounts of text.
and compressed storage/transmission
and auto delete after a week
sinful island
True. SQFbin/hastebin on mobile gets killed often by large RPTs. Though I'm not sure long text alone would be much better.
stark patio
https://sqfbin.com/yefobisecacuxijisosa @quaint jewel @sinful island
sinful island
The mission name being blank seems odd to me.
stark patio
Right................
stark patio
no one got an Idea?
sinful island
Repack your mission, maybe the file is messed up. Make sure the file isn't somehow named just a blank .Altis.
stark patio
Okay, let's jump to level two support here please :)
I have already done all that
sinful island
Then there is zero info that directly points to a cause in the RPT. Do you get this when loading it in the editor?
stark patio
That is where I get the error. In EDEN
sinful island
Sorry, I'm officially out of ideas. Last I saw that error was years ago with a mission when EDEN was new. I'd guess something got corrupted along the way. When you reverted, did you revert only the sqm or the entire mission?
stark patio
reverted full mission folder
quaint jewel
!issuewarning @fringe salmon crossposting
pallid krakenBOT
Done.
fringe salmon
wow
okay
@quaint jewel I dont really know which one does it go well with
so I "cross posted"
quaint jewel
You have a problem, thus troubleshooting.
I don't care why, you violated the rules, there's a reason it's forbidden.
You could've moved your message instead of crossposting.
fringe salmon
Why is crossposting such a big problem 🤣
quaint jewel
because it wastes peoples time.
sinful island
Because it is insanely hard to keep track of all the messages in here, let alone if they are copied in many channels.
fringe salmon
ok
fringe salmon
can anyone help me?
I have port forwarded using upnp and no errors "setting up port forward, please wait" and thats the only message
I choose antistasi mission and my friend cant find my server
or join my server
it didnt port forward or what?
stark patio
Ideas about my scenario issue?
quaint jewel
upnp never worked for me
fringe salmon
so what do i do?
quaint jewel
just manual port forward
quaint jewel
Yeah, I don't even read your third crosspost today.
quaint jewel
My PM, pushing in #arma3_config
#arma3_questions #arma3_troubleshooting yesterday and today, asking about same issue in both channels
Did you make sure all firewalls are disabled?
have you checked that the ISP even supports that?
fringe salmon
you do realize that pms dont count as crosspost?
the other 2 I admit that counts but in dms its never crosspost
uncut trellis
@fringe salmon Friendly advice here. What youre starting now never ends well.
You need help with something, thats obvious, but this is not 24/7 hotline for help. Your will need to have patience
quaint jewel
You are trying to tell a moderator what a crosspost is and what isn't? really?
fringe salmon
Dedmen lmao youre trying to find every reason for a warn
@uncut trellis im just clueless with my friend. we trying to set up a server and we have done everything but it still doesnt appear on servers list
mighty pier
who does read direct messages from randoms.....I don't
fringe salmon
lmao
quaint jewel
I tried to troubleshoot with you yesterday, I asked 5 questions yesterday to try to find your issue out of which you answered about a quarter of one.
Now I asked again and you are again not answering. Not sure if you are really looking for help here.
fringe salmon
WHAT did you ask this time?
mighty pier
nice caps....lol
quaint jewel
scroll up and search the question mark
uncut trellis
Youre really working against yourself here.
fringe salmon
can you copy paste again? im on phone and search doesnt show the recent msges
quaint jewel
You just have to scroll up to 20 minutes ago
fringe salmon
sure all firewalls are disabled? all firewalls? He disabled windows defender firewall
Server, router, windows ? What server and what router and what windows?
potential ddos protection on serverside Wydm, he pressed "Host server" in server browser
what ports did he forward? 2302-2306 both UDP and TCP
2302-2306? both UDP?
Maybe he is behind a double NAT, and his internet provider doesn't even let these ports through I doubt that the internet provider doesnt let the ports go through
Main question is that what should he do about trigger port?
@quaint jewel if you can/want to help us than let us add you to the call or just chat in dms, I dont want to make any problems here about mention spam, cross post etc - just want to settle this and so that me and my friend can enjoy our game
fringe salmon
bro
we tried everything
I searched half of the internet on how to port forward and how to create a server in arma 3
round lance
well i'm just saying, cause you mentioned you port-forwarded AND used uPnP at the same time earlier.
fringe salmon
when he will come home I will ask him for the screenshot of what he sees when he tries to port forward, but I am sure that he did manage it
@round lance we tried with both, without upnp, with upnp and without port forward
We did everything, trust me. he even cried that we still couldnt manage
quaint jewel
I doubt that the internet provider doesnt let the ports go through
You doubt, but you don't know.
That is especially common with cable internet providers. Like coax cable like Unitymedia in germany
wise barn
@fringe salmon
IPv4 or IPv6?
fringe salmon
@wise barn I used ipv6 in direct connect
quaint jewel
Arma doesn't support ipv6
wise barn
then you're out of luck
fringe salmon
and dedmen we are from latvia and I have tp link router and he has LMT (off brand) cus nowhere to be found in google in english except our language
wise barn
as said, IPv6 does not work
fringe salmon
where can I get ipv4?
wise barn
only your ISP can provide you with that
fringe salmon
oh boi
wise barn
but i doubt your ISP will give you IPv4 on request
almost no ISPs do that anymore unless you have a business contract
fringe salmon
is this what every host did? ask isp for the ipv4?
round lance
are you sure you don't have an ipv4 already?
fringe salmon
I just opened cmd and wrote ipconfig and I can legit see my ipv4 address
quaint jewel
Most people get ipv4 with their internet connection, without any additional request or payment
round lance
use that one
fringe salmon
oh
quaint jewel
ipconfig doesn't show you your external ipv4 address
fringe salmon
ohhh
round lance
true
quaint jewel
https://www.whatismyip.com/ this page does
round lance
use ipchicken or similar stuff like that on google.
quaint jewel
The lmt website has barely any information about what they offer
fringe salmon
sooo if you write in google "whats my ip" and click first link, it shows the ipv4 address? the one that people can get to and get you ddosed?
fringe salmon
xd i am so dumb at networking, but than that means we do have access to ipv4 if we just enter whats my ip in google
quaint jewel
if the website actually shows you a ipv4 address then yes
does the guy hosting the server also have one?
fringe salmon
how can we know that its the real ipv4 without having to talk to isp?
im pretty sure that he has one
ill confirm when he gets on, that could be in 1 hour as he is driving home rn
wise barn
@quaint jewel
all ip sites show me an IPv4 address even though i'm pretty sure that i don't have one. got deactivated by my ISP
quaint jewel
there is ipv4overipv6 magic
so maybe
LMT looks very cheap and they don't give any details on their website... So.... Not sure
Your router will tell you if you have a real ipv4 or are just being routed over ipv6
Also it seems to be mobile internet, via 4G 🤔
fringe salmon
no no, he has internet router and mobile internet is mobile data
Dedmen when he will come home I will mention if you if you are ok with that
fringe salmon
@quaint jewel okay my friend is home, sorry for tag if it annoys, soo should we add you to the call or you cant help us?
quaint jewel
I won't join a call
fringe salmon
you can have your mic muted
idc about your voice, I just need info on how to host
well if you cant/dont want to help us just say so
no hard feelings, ill just have to look for more info
sinful island
You can always just get your buddy in here and ask for help.
quaint jewel
we can chat here ¯_(ツ)_/¯
fringe salmon
ok
@fringe salmon
yup
So
we did everything
inbound rules of firewall, used hamachi, disabled firewall, windows antivirus disabled
we legit did everything and I highly doubt that the ISP doesnt let the ports work
idk about other countries but we have a system here that if you buy internet the ISP gives you a free router and I really doubt that they would actually give you a router and wont let you port forward
sinful island
Using hamachi should be ruled out for now and seeing if one of your servers is accessible is probably the best bet. Get a shot of those port forwarding rules and link it here.
quaint jewel
screenshot of the settings made in your friends router
quaint jewel
The lan address is internal only, no need to blank that out.
Is the lan address the correct one? Shows on server hosters "ipconfig"?
fringe salmon
yup
quaint jewel
Why is 2306 seperate? shouldn't make a difference though
fringe salmon
I read on some other post that it may help out
quaint jewel
does the router show your external ipaddress on it's main page?
To check if you really have real ipv4, and not fake ipv4 via ipv6
fringe salmon
no it doesn't I use https://whatismyipaddress.com/
dont know about him but mine shows LAN ip address and even WAN ip address
quaint jewel
and on whatismyip page it tells you your ipv4? or doesn't it list any?
if there is none listed, you cannot host Arma server
fringe salmon
it does tell me my ipv4 address
quaint jewel
If ipv4 is really really working, and your firewall is checked too. And the port forward looks correct.
Then maybe your ISP simply doesn't even forward these ports to you.
That's not a rare thing
especially not with cheap ISP's
sinful island
At the amount of trouble you are having, it may be better just to rent a server or have someone you know has been successful at doing this before host it for you.
It's really hard to diagnose these sorts of things as it's not a network setup that is known to us.
fringe salmon
yea
ty for the help anyway
There is one thing I want to say though. When I try to host the server with upnp checkbox enabled (I've also enabled upnp in my router settings) it shows me an error message saying that "port forwarding setup failed". But when my friend tried hosting the server with the upnp enabled, it didn't show him any error messages... So technically the port forwarding setup worked and his server should show up on the server list... but it didn't, I couldn't find it.
quaint jewel
upnp not failing with an error doesn't mean that port forwarding is working
fringe salmon
hmm okay
sinful island
Most ISPs are disabling UPnP on their gateways as they are afraid of DDoS/botnet usage.
fringe salmon
so only chance of actually hosting a server is to keep an eye out for port forwarding right? Like the port forward is the most important key here?
sinful island
Firewalls too, but yes. If you can't even direct join with the launcher, it's likely networking related.
fringe salmon
ok thanks for the help mate
grim tinsel
At this point renting a small server is propably easier
uncut trellis
you guys can connect to other servers though?
sinful island
None of the common ones.
fringe salmon
ok
service port should be 2302-2306?
internal port - blank
ip address - (have no clue what to put here)
protocol - all (I think)
and status ofc enabled
.....
thats it?
sinful island
IP address is your internal IP of your machine.
fringe salmon
and I figure that out by going in cmd and take the ipv4 address?
sinful island
ipconfig should tell you, yes. Probably a 192.168.x.x
fringe salmon
ok
and the rest?
im concerned about the protocols, do I leave them at all or udp or tcp
quaint jewel
all udp
https://community.bistudio.com/wiki/Arma_3_Dedicated_Server#Port_Forwarding like the wiki page says
fringe salmon
ok and what about the internal port?
quaint jewel
your screenshot says you should leave it blank so.. what about it?
fringe salmon
im just trying to figure out if its needed or needs to be left blank
quaint jewel
The web page tells you to leave it blank...
fringe salmon
oh
first thing I saw was the list
https://prnt.sc/p8rmm4 this is what it looks atm
I need to change anything in the screenshot above or press save and do I have to make more ports or I can go straight in game and host server?
quaint jewel
looks good
fringe salmon
ok soooo what do I do now? go host or add more ports
quaint jewel
save and done.
fringe salmon
https://prnt.sc/p8rpew leave this be and go now host?
quaint jewel
as I said, internal ip address is only internal to you, no reason to blank it out
yes
thin pier
Anyone know how to fix the random fps drops im getting thats stopping me from being able to play this game
fringe salmon
@thin pier drivers, lower settings, windows updates - 3 main things for me
quaint jewel
SSD instead of HDD
thin pier
@fringe salmon how do i fix it
sinful island
Especially if you get that when flying or moving fast, SSD as Dedmen said, is the way to go.
fringe salmon
Dedmen so, how do I properly host it. In port section I enter 2302 or 2306 or maybe 2302-2306? And how about UPNP? I check that or nah?
thin pier
it was fine like 20 mins ago before a windows update
quaint jewel
@fringe salmon you just leave port as it is.
upnp makes no sense as you already forwarded the ports
fringe salmon
ok
thin pier
how do i fix it vFAR
fringe salmon
fix what
thin pier
the fps
quaint jewel
Buy a better computer
thin pier
its unplayable
fringe salmon
what are your specs?
quaint jewel
uninstall the windows update that was installed.
fringe salmon
Dedmen btw how should my friend look for the server? Server Browser -> Internet -> Filter -> HOST = vFar and thats it? My server should pop up?
thin pier
he can use the server ip
quaint jewel
ye
quaint jewel
First result on google: https://www.techadvisor.co.uk/how-to/windows/how-uninstall-windows-10-updates-3682074/
fringe salmon
So I just "hosted the server" everything loaded up, no errors sooo I should pick a mission and my friend can start looking for my server?
quaint jewel
your friend should already see it
fringe salmon
oh
alright
Dedmen, nope my server isnt popping up - 2 factors
- He has apex dlc and I dont
- My isp doesnt allow ports
quaint jewel
- you were already told that doesn't matter
sinful island
The DLC doesn't matter if the server isn't hosting a tanoa map, you were already told this.
oak quarry
Hello, i need help
uncut trellis
heay. best to go ahead and ask your question
oak quarry
I have Arma 3 installed with over 200 mods too, and game is still in installed directory and playable but all of a sudden it shows "Install" on steam as i haven't downloaded it yet, even i played it today few hours ago
uncut trellis
steam for some reasong bugs like that sometimes
you can try verifying game files
or restarting steam
oak quarry
any fix about it?
uncut trellis
did you try restarting steam?
oak quarry
yes, multiple times
sinful island
You can try renaming the folder, starting the steam install, pausing and killing steam, deleting the new folder, renaming your folder back, and then relaunch steam where it should then start verifying. Not guaranteed though.
oak quarry
gonna try right now
unable to download again because of low disk space, will try later
is there any other fix about that?
sinful island
Nothing I can think of unfortunately.
grim tinsel
@sinful island Iirc you can also tell steam to install the game in the same directory and steam should recognise the files, at least it's worked for me
Also @fringe salmon verify game files via steam
sinful island
Should do. But it doesnt always. That's the way I moved things between drives before there was an option.
grim tinsel
Hm ye fair point
grim tinsel
We cant if you dont tell us your problem @thin pier
thin pier
I have played arma for like over 3k hours but now randomly i cant because when ever i join a server it has 1fps and keeps going up to like 40 then straight back down
any ideas of why?
vestal yacht
What has changed to your computer since the last time it worked?
thin pier
nothing not added anything
it started lagging so then i restarted my pc and now it just wont get passed 1fps
I have even reinstalled it
vestal yacht
yes, check your keybinds and learn to have a bit more patience
oak quarry
ok i can find keybinds but patience for what?
daring notch
Evening everyone.
My Arma 3 game disappeared from my steam. Any fixes for this..?
grim tinsel
disappeared as in uninstalled, or disappeared as in gone in the library? @daring notch
daring notch
Gone in the library. I managed to trick steam into recognizing the install directory so now its validating the files... i think. Is this supposed to happen? 🙂
grim tinsel
I managed to trick steam into recognizing the install directory so now its validating the files...
Tells me its uninstalled though
And nop not supposed to happen, just a steam thing
Had steam forget whole drives before
daring notch
Its not uninstalled; its in my E disk still, so i just told steam to go look there and apparantly it found it
Its just taking a hellishly long time
grim tinsel
Ye I mean uninstalled in the steam library
fringe salmon
I'm having troubles with advanced towing,rappeling, and urban rappelling. I've made sure they'e loaded on the server there's no error in the rpt but the options in the menu don't show up once i'm on the server. Anyone have any idea what could be causing this? I haven't found any fixes just people with a similar problem.
fringe salmon
I keep getting the Unable To Init DXGI when loading the game and entering the main menu or randomly when in a server.
This never happened until recently
torn relic
Im using DUWS and none of my mods are working. the ace names work but nothing else. in the configure addons it says "start a mission"
oak quarry
I just reinstalled my Arma 3 and now i want to download 272 mods i subscribed from workshop, but problem is that i have installed my Arma 3 in F drive which has 112GB free space for 87GB mods, but steam is downloading workshop mods in C drive rather than F drive and C drive is on low disk space but before mods used to download in F drive where arma was installed
any fix about that?
robust pollen
I had the same problem and ended up simply reinstalling steam
It's basically impossible to get it not to use the C drive, even if you relocate the games to another drive.
oak quarry
@robust pollen can't uninstall steam because of many other games, and before arma 3 reinstall i had my arma 3 mods always downloaded in F directory where arma 3 is located
supple crystal
You can uninstall steam, just copy/move the common folder where all your games are from C: to F: then reinstall steam to your F: drive and move all the shit into the new common folder
oak quarry
@supple crystal there is no game installed in C drive where steam is
supple crystal
Well then just uninstall steam and reinstall it, if it was me I would make a copy of your library or just move it somewhere just incase
dim ginkgo
Ok does anyone else have the problem with vehicle guns that sometimes they seem to autotarget in a single direction
and everytime you try to move it in a direction it'll keep fighting you to go to that area
If so does anyone know how to stop that?
robust pollen
junaid: you can reinstall steam without having to reinstall your games
EPIC GAME STORE...on the other hand, obliterated EVERYTHING when i went to reinstall it
aurora I've had problems with the tires on the quad being turned when I get on it, moving the mouse or waiting seems to solve it, your problem, on the other hand, sounds like you have a joystick plugged in
round lance
@dim ginkgo ctrl+T should fix it if in the context of UAV turrets.
Otherwise could be a mod.
dim ginkgo
No its not mods or the vehicle turret lock
its just, like, commander guns will just keep trying to stare in one direction
autumn otter
so i have a problem that i cant launch game cuz i get the message 0x0000DEAD- any way to fix this?
dim ginkgo
and even if i keep fighting it to aim it'll be me constantly turning it against where it's trying to go
grim tinsel
Any chance you can provide a short video or something like that so we can see what it looks like? @dim ginkgo
uncut trellis
@dim ginkgo you mean AI turns it to some other way?
please explain fully what you do and what happens
and what do you expect to happen
dim ginkgo
I cant put up a video but like, yea its like the AI turns it to a direction
not usually at target, just in a direction
but like, its constant and I have to keep fighting it
uncut trellis
what is it youre trying to do?
uncut trellis
are you the gunner?
dim ginkgo
yes
uncut trellis
then the AI should not have control
dim ginkgo
I know
uncut trellis
is it modded vehicle?
are there AI in the vehicle?
how did you take control of it?
dim ginkgo
Yes, but it happens with any vehicle, slammers, RHS, Varsuks
Doesn't matter if AI are in it or not, it happens when at least 1 other person is inside AI or human
and any manner of gaining it causes it
uncut trellis
either its some mod causing it, or your install or profile is pooped Id wager
dim ginkgo
Hmm
Its so weird... cause its definately some kind of autoaim because after it hits the direction it wants to face it will actually slow down, stop and go back since it overshoots it
just like the AI
but its not at something, its just in a direction, a constant direction every time
uncut trellis
you got some haxxors on? 😛
uncut trellis
if you run no mods does it happen?
dim ginkgo
I think so, but I can't definitively say yes
uncut trellis
then when you can definitely say so we can try to debug it further
dim ginkgo
I'll see if I can figure that out, but its not super easy to replicate, its seemingly random
but once it starts happening I cant make it stop
if my gun is steady for more than a second, it'll start rotating again to the direction it wants to face
happens mostly when I'm moving in a vehicle but not always
wait no, it does happen even without mods, because thats how I know i've seen it with the Slammer's Commander gun
cause I've had to fight it in multiplayer on a no mods server
uncut trellis
do you have controllers plugged in?
dim ginkgo
Yes but that wouldn't make sense, because then it would want to spin continuously
it spins to a specific angle and then stops. if it overshoots, it then spins the other way until its centered itself on the invisible target
uncut trellis
well quite easy to test if you unplug it
dim ginkgo
it definately happens most often when looking around in third person, but even then it will still happeni n first
uncut trellis
also would be good to confirm its actually happening without mods
dont recall anyone having such issue here before
dim ginkgo
I know, I've looked online for solutions to this and I feel like the only person who's had this issue
it just doesn't make any sense to em
it actually feels and looks like the AI takes control of my character and targets something but its not actually there
uncut trellis
well unplug the controller for starters
dim ginkgo
I can try that
uncut trellis
AI cant really take control of you
dim ginkgo
Thats what I figure but
its also not constant which really confuses me, if I let it go all the way around and then move it back where I want it to it will stop for a short time
and then if I idle too long it starts rotating again
uncut trellis
have you tried verifying your game files on steam?
also simple to try is to wipe your arma user profile to get fresh settings
or create a new one
gentle kiln
My game keeps saying "You were kicked from the game" this happens On vanilla servers and on modded. I've disabled all firewalls and defenders I've tried re installing pretty much everything, deleting everything and starting from scratch but nothings working. Im not sure what I can try anymore.
oak quarry
@robust pollen are you sure if i reinstall steam then my arma mods will download in drive where my game is located?
oak quarry
nevermind i fixed it, never knew it would be that simple
grim tinsel
Can you share the fix for others? @oak quarry
oak quarry
yes sure, wait a min
FIX : I didn't had to completely reinstall steam, i deleted all files of steam from C drive except Steam.exe and steamapps folder, then double clicked on steam.exe which installed steam again with no loss of any game, and the fix for mod download location i received email answer from bohemia interactive, this was easiest fix which worked, open Arma 3 launcher, click on "options" on top right corner, go to launcher options, switch to Mods option and then from there click on Move and chose your folder to get mods downloaded in it, i simply created Arma 3 mods folder in steam library/common in F drive where game was installed and now it works
grim tinsel
Thank you for sharing it 
oak quarry
🙂
robust pollen
sorry I didn't have better advice but glad to hear you got it working in the end
oak quarry
it's fine no problem bro
robust pollen
anyone ever have a problem with arma spawning invulnerable units?
robust pollen
Yeah, ALiVE
Of course, the previous ~50-100 units before these died without much issue, but I'd like to think I know when 2 magazines from a zafir and 2 HE rounds from the RPG should kill something...
someone actually
tropic yarrow
You had an uninvited visit from the terminator I guess.
fringe salmon
I am in situation where I dont have the planes dlc and I dont need the controls but when I take em all out (deleting the keybinds) they somehow reappear again
what am I doing wrong?
is it because I use helicopter?
I can confirm that its not the helis fault
uncut trellis
what controls?
Arma has planes by default too
planes DLC does not affect your control scheme at all
fringe salmon
the plane keybinds come in the way when I recently changed my helis keybinds from a tutorial
I cant use when they both are keybinded, why didnt they implement where I hop on a heli all of the rest of the keybinds just go quiet
like plane keybinds deactive or something cus im legit not using a plane
they go as red (duplicates)
uncut trellis
they should still work
plane keys dont affect you if you are in a helo
only the common functionality keys are shared between vehicles
fringe salmon
so that doesnt matter if my right and left pedal keybinds are red?
uncut trellis
if they are red becuase of plane/helo keys then it should not
if they are red because you have flares and turn left on one of them
that might matter
but they will still work
they will just to both actions
fringe salmon
ok ill test
ok they dont affect, but 1 more question
whats a good keybind for countermeasures?
uncut trellis
where can you reach easily I suppose
round lance
C does well with keyboard and mouse, all things considered
On a flight stick if you have buttons near your throttle or on it, those are good.
fringe salmon
@round lance ik it does even thought ive never used it, it goes in the way of my heli keybind
round lance
X then, if you don't use auto-hover.
summer python
Hello guys anyone had or know how to fix the error battleye initialization failed
(I tried to delete battle eye and then verify my game files, retart my router and pc and still no working)
fringe salmon
reinstall the game? I had the same error once and all I just did was restart my game
summer python
Ok, well i guess i will reinstall it
fringe salmon
guys how to properly change fov? I used the arma fov changer and still, no changes it did work on 1st try but the next day its gone, I even just tried on 2 profiles
no results, the same fov
fringe salmon
I know about the config, but lets say my fov is 85
do I just enter it in the config?
it has numbers with commas but this is just a plain 85 that you enter in the program
nvm
I found a different tutorial without the program
supple crystal
@fringe salmon fyi changing fov breaks a lot of weapon and vehicle scopes, and the 2 most popular squad radar mods
orchid grove
The maps that come with CUP terrains and CUP maps don't work for some reason on my server
They work fine singleplayer
grim tinsel
Which map, and what isn't working @orchid grove
fringe salmon
@supple crystal I only need the fov change to see my feet in heli
supple crystal
Doesn't change what i said
wise barn
@orchid grove
check your server RPT files and make sure CUP Terrains Core and Maps are actually loaded
orchid grove
@wise barn What will it say if they aren't
And how do I load them?
@grim tinsel All of the cup maps, the load in the mission selection but when I go to play them it puts me back into the mission selection
wise barn
Google for arma 3 rpt file location. Once found, open the latest in a Text Editor and check for errors
fringe salmon
{
if ((_x select 2) call (_x select 0)) then {
(_x>
12:26:34 Error position: <select 2) call (_x select 0)) then {
(_x>
12:26:34 Error select: Type Object, expected Array,String,Config entry
12:26:34 Error in expression <ameNo = diag_frameno + 1;
If I am getting this spammed in my console
What does it mean?
grim tinsel
Can you put that in a code block for us? 
fringe salmon
`{
if ((_x select 2) call (_x select 0)) then {
(_x>
12:26:34 Error position: <select 2) call (_x select 0)) then {
(_x>
12:26:34 Error select: Type Object, expected Array,String,Config entry
12:26:34 Error in expression <ameNo = diag_frameno + 1;`
@grim tinsel
Ughhh how do I do I code block jere
if ((_x select 2) call (_x select 0)) then {
(_x>
12:26:34 Error position: <select 2) call (_x select 0)) then {
(_x>
12:26:34 Error select: Type Object, expected Array,String,Config entry
12:26:34 Error in expression <ameNo = diag_frameno + 1;```There
lilac moss
Soooooo... I was spawning some AI and ordered to get into a vehicle, but i have a little problem that the AI doesnt wanna drive away 😂
Since its the map Chernarus Redux, could it be due to not being able to find a good road ?
Spawning happens server side and it has 6 waypoints all over the map, wp's set to move and driver behaviour set to careless
quaint jewel
@fringe salmon
https://github.com/CBATeam/CBA_A3/blob/31c516573bc80cdb3dbf7b65445e8143bcb829f6/addons/common/init_perFrameHandler.sqf#L78
no idea how _x could've possible become an object. Unless someone is doing some really shady stuff circumventing the API and manually injecting entries into that array
fringe salmon
@quaint jewel is it in the mission or a mod?
quaint jewel
I linked CBA code to you
If you are asking where that shady SQF code is that breaks CBA.. How would I know 😄
proven pollen
Maybe Placed this in the wrong text channel but I still need help with this issue.
Is there anyone who can help me, A month ago I was an admin on Official Zeus Sever US#3 and was then "Kicked" From the game. One of my friends who was with said a Scripter cam in and Took over. When I tried to rejoin It told me I was banned, So now I cant Join US#3 without the msg "You were banned". I also was told by one of my other friends there are other people with this same issue. I do know I was not banned by you guys since I can still join other Official Zeus servers.
quaint jewel
Nah your previous post was already in the correct channel.
Wait for Dwarden to read it or message him
wintry plaza
Welp, this summer's fiasco with Win10 and losing a lot of my settings is still having its affects on me. I've had to reinstall the A3 Tools, re- setup the P: drive, and consequentially have lost the ability to use Buldozer. Taking this time to fix some major issues with my mod, I got the paid version of MikeRo Tools and recompiled everything the right way. The problem is that now I'm able to spend time working on new models, and I need a previewer to ensure the vehicle bones are connected right.
I get errors saying it cannot be found, although I've tried using PDM to install, and then tried Arma3p. The path to Buldozer is pointing to .../arma3/arma3.exe, but I've also tried arma3_x64.exe.
uncut trellis
Are you running OB from the Arma Tools launcher? OB buldozer works only with the 32 bit exe
@wintry plaza
marble fiber
Anyone good with altisliferpg / nitrado
pine forum
Anyone know the reason that Arma crashes when helicopters are involved.
grim tinsel
Nope we cant magically fix your problem with pretty much no info @pine forum
pine forum
Well it's not my problem. It's my friend. And he's too retarded to send me anything. Looking up on google, it looks like a very common problem, but with no fix.
wintry plaza
@uncut trellis Yes. I am using A3 Tools to launch OB.
wintry plaza
You mean this?
https://pmc.editing.wiki/doku.php?id=arma3:tools:buldozer
Cookie please 😃
uncut trellis
it states there to not run the tools from the launcher
the launcher causes all kinds of windows access issues, especially on win 10
always run all the tools from their own exes or direct shortcuts
and dont even open the Arma tools launcher
wintry plaza
I don't see where it says that specifically, either. I only just found this by doing a google search for buldozer PMC> I wouldn't have known to look for PMC without audiocustoms' comment
It worked every time I did it through Tools
wise barn
you where todays years old when you learned the right way 😉
wintry plaza
But now Win10 is doing a number on my system, so... I guess I'm not so "lucky"
wise barn
ofc not... you use win10 😂
wintry plaza
Launched OB from direct clicking its icon. Still no joy on Buldozer. Here's my options entry:
e:\program files (x86)\steam\steamapps\common\arma 3\arma3.exe -buldozer -window -noLand -exThreads=0 -mod= -noAsserts -nologs -profiles=P:\Buldozer -cfg=P:\Buldozer\Buldozer.cfg -name=Buldozer
uncut trellis
and you have P drive set up with the simple subst :p?
you might need to run that normally
then as admin
and then normally again
for it to register in all the right places
this part is highly crappy with the tools and win10
wintry plaza
@uncut trellis Would it be okay if we discord 1to1?
wintry plaza
and you have P drive set up with the simple subst :p?
I have no clue what this means. Sorry if I seem dense.
nocturne leaf
The server after a minute or two keeps crashing after being ran and up, I don’t know what’s making this happen
The server is :
2 core
6 GB Ram
100 GB sata
250mgps uplink
wise barn
"abcd SELECT exp_level, exp_total, exp_perkPoints, exp_perks FROM players WHERE pid = '76561198251857004'"```right before the server crashes
nocturne leaf
Got it working it’s was an older version of the extb3 making it crash
uncut trellis
@wintry plaza there's a page in the PMC wiki on how to set up P drive.
Its lot simpler and better working than the way the atmaTools thing does it.
flint rain
I´ve been having a pretty weird and specific problem with Arma 3 for a while now. I am a part of a unit and we have our own server. I could play on it all the time without any lag but in the past two weeks I´ve started to experience crazy rubber banding. I am guessing it has something to do with bandwidth that you see in the Players list on any server. On every other server in Arma 3 my bandwidth is all good but in that specific server my bandwidth always drops to exactly 62 after about a minute of playing. Did anyone have a problem like this before? I can´t find any solutions on the internet and I am getting desperate 😅 (*added a screenshot in #screenshots_arma *) My internet is good btw so it´s definitely not it
orchid grove
How do I fix this? ** 3:09:15 @CUP Terrains - Core | @CUP Terrains - Core | false | false | NOT FOUND | **
quaint jewel
Well its not found
means the folder is not there
the fix is to put the folder there
fringe salmon
how to reset fov guys? my sound is fucking up
supple crystal
👏 😂 Didn't i tell you it would break lots of shit? 👏
nocturne leaf
I've got a battleye problem when ever i join the server with battleye on i get this
https://cdn.discordapp.com/attachments/172822427708030976/627908324427563008/unknown.png
this is the error
what would i need to do to fix this
fringe salmon
@supple crystal xd but only 1, I just wanted to see my feet when using heli
supple crystal
Dont no what other settings you might loose, but deleting the file you edited and checking game integrity would prob reset it.
fringe salmon
if I create new profile I lose my stuff in multiplayer servers?
quaint jewel
depends on how the server stores your data or doesn't
nocturne leaf
if someone can answer to my problem i would be grateful
uncut trellis
You'll have to wait if someone who knows how to anser to it sees the message
quaint jewel
You want an answer? okey. Here we go:
Don't know.
There, you now have your answer. k thx bye
feral shore
I'm having trouble with starting the game.
"CfgSpatialSounds.pbo" or whatever apparently doesn't exist in my game files, even after verifying files.
quaint jewel
thats not a pbo
that is a config class
are you running mods?
why does that create a problem?
feral shore
The game crashes because the config file isn't being found.
This is what I'm talking about.
feral shore
Yes. Gimme a sec to snip what I have so far.
Shit, I might have to just DM it.
I can't send photos in here, only links.
There we go; found a loophole.
quaint jewel
access denied 😄
feral shore
I think that RHS is responsible for it, since I needed to download a fix for the Russian radio lines...
I've always had sound issues with RHS, so it's the most likely culprit.
"Cannot find base class 'CfgEnvSpatialSounds'"...
Weird. I just disabled RHS and it's still happening.
"bad_module_info has stopped working."
grim tinsel
@feral shore if you delete the original upload of an image and then share the link, the link wont work 
feral shore
Okay, the vanilla game is fine.
quaint jewel
now find the bad mod 😄
feral shore
That's gotta be the hard part, right?
quaint jewel
well just takes some time
feral shore
Running only CBA_A3, CUP Units & Weapons.
Game is running normally...
If Ravage is the reason why the game wasn't running before, I'm gonna be pissed...
crude bronze
for some reason some modded units aren't showing up in zeus, other modded units are, but not the ones that I need
swift forum
Can anybody help me with hosting a server ? im trying to play antistasi with my buds but UPNP doesnt work for me somehow.
grim tinsel
Some mods arent really zeus compatible @crude bronze
Is it a specific mod that isnt showing up?
crude bronze
most stuff from unsung isnt showing up
orchid grove
@quaint jewel But the folder is there
rain patrol
So i have been trying to join any Official server to play with a friend and I keep getting an error message that Enoch files ar enot signed by the server
how do i fix this
grim tinsel
Do you have the optional part of contact loaded? @rain patrol
grim tinsel
No
grim tinsel
What was the fix?
rain patrol
it needed verify
zenith turret
VOIP works in some servers but not others for some reason, the game can detect my mic and auto ajusts volume correctly but it doesn't transmit on some servers
grim tinsel
Make sure those servers don't have VON turned off serverside @zenith turret
quaint jewel
@orchid grove you say its there. Server says its not there.
Humans make mistakes. Arma logfiles don't.
orchid grove
@quaint jewel I fixed it, it told me me that they're found but the maps still don't load
orchid grove
Yeah, I fixed them both
quaint jewel
the RPT also lists every single pbo that it loads, have you checked that the map which is missing, is being loaded there?