#arma3_troubleshooting
1 messages · Page 79 of 1
That's not even that much
exactly
Know how to fetch a rpt file?
nah
yey, hope i dont have to buy a new hard drive tho XD
mostly cause this one is very old so its a very likely possiblity its just broken
hm
yeah it seems like i've been getting these issues in one of the latest hotfixes
the one that was like around 60 mb
since before that everything worked fine
@red inlet disable chemical warfare and see if that fixes it, come back if it doesn't and I'll ask someone better then me to take a look
hmm okay
@red inlet Do a file integrity check first please actually
game cache verify??
yup
okay
@long iron still crashes
Did it replace any files?
50
Does it crash out whilst playing vanilla?
havent tried full vanilla but even if it doesnt i see not much point, not intending on playing vanilla
If you try vanilla, and it occurs, you then know it's your game and not mods...
If it doesn't happen vanilla, you then know to look for broken mods...
i mean if it was mods everyone else would be crashing and theres people with worse pcs in my group
Arma is a very special game, ACRE2 would cause crashes for 1/2 of them whilst the rest were unaffected Everyone had the same mods
Well.. ACRE :u
@red inlet Seems to be hard drive memory related, sorry bud
got that from the file i sent you??
Yup
so whats the actual issue with the HDD
yes
Then yeah that's prolly your issue
guessing the only solution is to buy a new one?
Yeah afraid so, and in case you have anything important on there, transfer it to a USB stick, like today.
photos, save files, etc etc
@quaint jewel Some of our group are looking forward to TFAR 1.0 so I believe we'll be giving it a test at some point, not sure 😄
Don't test relay antennas. They are apparently broken 😄
@quaint jewel they fancy af tho
Well the antennas work. But if you are 4km away and Radio to a buddy standing 20m away. The signal will go to the antenna and back instead of directly to your buddy... ¯_(ツ)_/¯
@oak stream @red inlet did you actually test if your hard drive is failing, or just infering it from the RPT?
infering it
okay, then test it too 😄
after he verified cache and replaced files, which then still crashed
sec
that's all well and good, but no substitute for a proper test. Use HD Tune or HD Sentinel or whatever else you prefer
@fallow remnant https://paste.ee/p/A3q5U
There's the relevant rpt if you want to take a look
Oh no
and how do i check for bad blocks??
Yeah someone being able to verify the info and come to their own conclusions is just a positive lol
hmm it doesn't look too bad, but there's one pending sector that's probably the one causing the crash
how to fix
try running a SMART test with HD Sentinel?
Well, it should fix it itself. If it can't fix it then it's (probably) run out of replacement sectors, in which case fix by replacing the drive/claiming warranty on it.
i got it, but gee the ui is cluttered
do i click repeat test?
hold on nevermind im an idiot
here, looks like its fine but its fucking not from what i can see ingame
if i did a full disk wipe and reinstalled windows (since i do have a lot of clutter and shit on it that i dont actually need) do you think it'll be fine?
yeah, a full format should force a reallocation
see if you can "write zeros" to the disk, too
hm?
BTW, just try reinstalling the game first, if you didn't already
uh it's...probably best to look it up online but in short, when you delete a file or do a "quick format" the actual physical disk isn't wiped. It just gets overwritten.
So writing zeroes basically means you flip the magnetic bits on the disk surface to wipe it's data completely
so nothing gets deleted but the entire drive's contents just get overwritten with the same exact things?
Do keep an eye on the health of the drive though, if you get more bad sectors as time goes on, might have to replace it
no no
it's overwritten with new data
"deleting a file" simply means the OS doesn't keep a track of it anymore
so its basically a more hardcore wipe
yeah?
Yeah, it's a hardware level wipe
i'll just reinstall arma first then
hope it doesnt get reinstalled on the broken sector
probably shouldn't, since the drive's firmware and the OS know it's broken
whot?
@fallow remnant so i reinstalled the game
but all the mods have been "working" for like half an hour now while im in the launcher
aka theyre not ready yet, they're all "working" but none of them seem to getting ready
what do you mean?
Are they still downloading from the workshop?
^ check steam, maybe they're still downloading
moreover, run the game without mods first
I just redownloaded and my server list is empty
Launcher?
yeah th server list is empty on the launcher
yeah th server list is empty on the launcher
Has anyone noticed issues with 1.78 and UAVs? Seemingly random, the UAV will drop down to default 50m. Control is lost and regained after 10 seconds swapping from gunner to driver. I haven’t found anything on the issue tracker for it. At first I thought it was HC messing things up but I’ve tested without HC and same thing happened. Dedicated server.
@chrome merlin look in %localappdata%\Arma 3, there will be some minidump, bidump and RPT files. Send Dwarden the most recent ones via PM with a description of what's happening
(so one .rpt file, one .bidump and one minidump, that have the same/almost the same time stamp)
Can BattleEye not responding issues be caused by the game server or is it a client issue?
@fallow remnant yeah? is directx 12 may be the problem?
Because the DXGI device was removed
I dunno, but see my previous message
newest Nvidia driver?
Intel
@fallow remnant No.
He's using Intel
Intel integrated graphics?
Intel HD graphics 4000
Laptop?
yeah laptop
@crude kestrel Disable it in launcher and reenable it. Reboot computer. Reinstall battleye (Arma 3\BattlEye folder. The install/uninstall script)
Is there an .exe to reinstall or should I delete the folder and verify cache?
Nvm
Misread your last
sent you a screenshot @quaint jewel
🤦🏽
You do.
check the ss I will send now
"Fujitsu Lifebook AH532/G21" All online listings I could find say it has a NVIDIA® GeForce® GT 620M
You also have Intel integrated graphics.
You have both. Use the real graphics card instead.
install nvidia drivers
I tried once but it says your device doesn't meet with ...etc
Did you download the correct driver? specifically for the 620M?
lemme try again
Considering you didn't even know you have one you probably didn't.
You may need to set the Nvidia settings to use the GPU as the main graphics for ArmA
Is there a way to check why Eden Editor is not loading default assets? Like to check if mods are conflicting and etc?
@fallow remnant @oak stream thanks guys, seems like it got all fixed when i reinstalled the game and reinstalling it seems to have taken care of one of the pending sectors on my hard drive too so the game must have been installed on the broken one
but eerr that fixed crashing, its all good but do you guys think you know how one would solve stuttering and 2-3 second freezes that happen situationally?
maybe using some of the ingame parameters, or any specific settings that would make both the gpu and cpu have equal loads
i mean it really mostly happens if i get shot in close range ( i guess firing particles and all that), when theres big fights (but thats obvious I guess) and when i drive at really fast speeds
@red inlet that's unfortunately caused by using a HDD instead of an SSD, the Arma engine "streams" data from the disk almost continuously, so that's a problem. Defragmenting your hard drive could help, though. Additionally, consider lowering the object view distance to 1000m or less, and keeping the object, texture and terrain quality to medium or high (medium may not look that good).
Ah... interesting... Does that mean hard drive performance could directly effect game performance?
I guess allocating more ram wouldn't help that much either, eh?
I just got Arma 3
and im getting this error
preNLOD format in object
a3/structures_f_exp
civilian\sportsground\rugbygoal_01
@civic hawk
Corrupted file, verify game stucture with steam
Oh Thanks ! forgot that function existed 
@queen rampart yeah it does. More RAM could help (and Arma seems to really respond well to faster RAM too)
So I reinstalled BattlEye and the server still kicks me. Could it be the mods causing an issue? Should I launch vanilla and join a server to see if it still works?
Should I reinstall ArmA?
does anyone know if the MacOS A3 client is up to date, or if its still behind?
@hasty vine Do you mean on 1.78?
Yes, sir.
@fallow remnant does any one of the view distance setting have any effect on view distance for infantry or vehicles?
@ocean lagoon Heya, sorry to disturb you, what version is the MacOS distribution on at the moment? 1.78?
(1.76 iirc)
@red inlet it's global - so for both infantry and vehicles. One affects rendering of the base map, the other controls object rendering distance
so being a sniper is a no go beyond 1000 meters cause i wouldnt see anything
yeah
mkay
btw what do you think would cause the extreme fps drop when i get shot in really close range? im pretty sure my hdd isnt THAT bad as to not be able to load such data
my computer started burning while playing arma 3 plis help
whot...?
@midnight charm
Kharos i dunno about that, tbh. Haven't run Arma from an HDD in a long, long while now 😅
@red inlet HDD/Sounds
I used to practically freeze up for a few moments or drop to 5FPS when someone shot me with a big LMG
Is there any problem with intel HD graphics 4000 in Arma 3?
it's just not good for gaming
Im gonna rebump my question, all the players in my mission, when killed, they get kicked by battle eye with this error: Script restriction #13, what do I have to do in order to prevent this?
do I have to apply something in the be filters?
what kind of mission?
@late zodiac is this your own mission?
Or is it just some random exile / zombie / wasteand / rp garbage?
@late zodiac Ha, so you're telling me you're not using a Tonic template?
I find that hard to believe
is it exile?
You started off by shooting yourself in the foot, nice.
people keeps getting kicked without any reason
there is a reason...
you used a mission that wasn't yours, added stuff that most likely fucked up something, and now battleye is going nuts for it
#13 "_isUnconscious"==0&&side _x==independent) then{_8j=_8j+[_x];if(true) exitWith{};
check your RPT files
Sure you do
ok... what is it...
exile, wasteland...?
life rp garbage mode cit. 😄
derp
@late zodiac
30sec of google told me, that this is an error with your battleye filter. if you invest 10min more, gain some knowlage on your filters, you'll be able to solve your problem
Thats life ¯_(ツ)_/¯
already know that, wanted to know if there are any other reason besides that
@wise barn Of course not. How dare you!
any other reason besides that
it's life rp...
Just fix the BE-Thingy, you will see they won't get kicked.
☝
😑
Hey im getting a error MiniDumpWriteDump call failed. Not possible to generate record to file 'C:\Program Files (x86)\Steam\steamapps\common\Arma 3 Tools\ObjectBuider\ObjectBuilder.exe.short.dmp'
anyone can help with BE Client kicks ? i know they just rolled out 1.80 Hotpatch, ive been in a exile server for hours on end, after a restart now its endless BE Client Not Responding kicks. changed firewall settings both windows and router, dropped the firewalls, BE Service IS running, Steam verification done no errors.... out of ideas
I have had a few players be okay when they used Arma launcher and not A3L with battleeye kick issue
any more on the memory crashes both server and client?
So when you try to play the singleplayer campaign with ACE3, it doesn't work because explosives. Does anybody here know a good way around this?
Ideally I'd like to just cheat in some trigger devices and use the ace mechanics
alternatively I'd be happy with disabling it and have arma 3 vanilla explosives while keeping the other ace features without having to make a copy of the mod for SP and delete the explosives pbo (which is the only idea I currently have)
Delete ace_explosives.pbo and make sure Steam doesn't redownload it automatically.
steam always redownloads things, which is why I'd have to copy the mod locally
but is there no nicer way than to mess with the mods files?
that might be true
but I'm lazy
xD
apparently that also breaks the savegames
I can only replay missions completely
when I try to load a checkpoint it tells me it depends on ace 3 explosives
Yep.
You can just use simple single player cheat menu if you want to speed through the part of the mission that you've already done @median imp
can I use that to give myself items?
then I might just use that to give myself a triggering device for the explosives
can you post some link?
No, just Google simple single player cheat menu
okay 😢
You gotta do some work by yourself, c'mon now
I'm a lazy bastard though 😐
I'll do it for 350 dollars paypal
*opens google*
Thought so
to be honest, I don't know why this isn't a part of vanilla arma 3
it's a sandbox game
and it doesn't allow for any kind of cheating in singleplayer
what does it do?
Enable the debug console.
@median imp I dare you to hit the plus and minus key. We'll see what you think of cheats in sp then
that's the time accelleration thing, right?
aiming at x4 speed is hard xD
btw. different topic
Lol
It seems lots of people have lots of problems with the ACRE2 mod
are there any solutions? did I just not google hard enough?
is there some convenient forum threat that I missed where it says "Oh, you just need to press the fix everything button and it should work"?
@supple lily Try having your EXE run as administrator, seen some access violations with some players where that fixed it
@median imp go ask anything specific in their BI thread dingus
hey, i wanna host an zeus op but i dont have a teamspeak server with acer on it 😦 can someone help me out?
you can host a small TS server on your local machine very easily
there are a ton of tutorials and howto's avaliable
@slow sleet I have a TS you're free to use if you'd like or I can teach you how to host your own
wow thats so nice of you 😃
if you coud tell me how to set it up woud be good
so i can do it by my self
Yeah feel free to PM me and I'll link you to the TS server and talk you through the ports
will do
Teamspeak has a integrated weblist server browser. Just search for a server that's empty
don't you need ACRE on the TS server too?
oh, didn't know that
Does anyone have trouble with MCC trying to use it on a dedicated server as Zeus? A few months back I tried to use it on my servers and I couldn’t access the command tablet interface (the most useful part) because the interface was glitched and broken. Has it since been fixed? It was very useful for setting up firemissions, exfil, and populating areas.
My group actively use it @reef plinth
Okay, I'll do some test runs and see if the issue got patched
anyone know why this person is being kicked off the server? This is the only log I find regarding the player 19:45:37 NetServer: cannot find channel #378491029, users.card=6 19:45:37 Message not sent - error 0, message ID = ffffffff, to 378491029 (<discarded>) 19:45:37 NetServer: cannot find channel #378491029, users.card=6 19:45:37 Message not sent - error 0, message ID = ffffffff, to 378491029 (<discarded>)
So hello. I was wondering if anyone here uses G-portal to host ArmA 3 servers
It always helps to state the problem you are having, someone will help you if they know how to @chrome merlin
@chrome merlin It helps if you turn your Monitor on otherwise you can't see the game ofcause
inb4 DGI graphics device removed
I play this game for 15-20mins without a peace of lag
then it suddenly freezes?
WTH
I recieve battleeye not responding
dunno ¯_(ツ)_/¯
@quaint jewel being a charm again 😄
Thank you Sir o7
Thanks ill try
so i followed the instructions at https://community.bistudio.com/wiki/Arma_3_Dedicated_Server#Instructions_.28Windows_o.2Fs.29 and im not getting a namehere.Arma3Profile but its generating other stuff like the profile itself, ive tryed also chaning the directory and that didnt do anything
"-profiles=C:\Games\Arma3\A3Master" -port=2302 -config=CONFIG_server.cfg -world=empty
that doesent really fix anything that just avoids a problem that shouldent exist
¯_(ツ)_/¯
hey
i get kicked from all servers with signature checks because signarure checks time out. Why does this happen?
Because the signature check timed out... Obviously.
That may happen because you are too slow to answer. Which might happen because your PC is too slow at building the signatures. Which might happen because your Hard drive is too slow
Is there a way to build the signatures pre-game?
As not waiting for the signature checks ingame
Probably yeah. But nothing you can do
Can't lower mouse sensitivity in arma past a certain point in the options.
12 inches is 4x360 for me
i think i have been banned
when i try to join almost any server it says admin battleye ban
or something like that
i have ~20 hours on arma and i hav e not cheated
i think i knoiw the reason though
my friend took me to a wierd server where you earn much more money than a regular server
i am level 65 in king of the hill and i have almost 2 million cash
googling the error says that i can appeal for a unban but i cant find where to appeal for a unban
@winged grail #channel_invites_list look for king of the hill
where?
i have about 20 hours in arma
what do you mean by look for king of the hill
i can join other koth serve beacause i get insta kicked from almost all of them
Read the whole message. Don't ignore half of it.
KK, thanks
20h in arma, lvl 65 and 2m cash
you cheated on a xp server
He already said that he did that
o'rly? where? didn't see it
my friend took me to a wierd server where you earn much more money than a regular server
oh, there...
i'm one short of reaching my dosis of morning coffe......
Yeah, it's totally that rogue friend's fault and he had no idea that this was entirely dodgy
well, benefit of doubt, if you just have 20h in the game, it's possible to be misled
¯_(ツ)_/¯
Hello after a Windows 10 update a few days ago, I now have the problem that the model is moving very slowly in the object Builder and the mouse is very strong on the jerking tools have already re-instaled but it has not brought anybody knows someone else still ne others solution sry for the bad googel english 😃
yeah, it's a problem we're all having
speeds up if you put the viewport in directX mode
oh ok then just help wait until the part of bohemia comes a fix
I have 230 hours in Arma, and for the past 20-ish I cannot play the game. I can use Eden Editor, and Virtual Arsenal, but if I try to test an Eden mission or play SP/MP, my game crashes. It does not give me an error besides Status_Application_Hang. As far as I know this just means that there was a crash, but I havent been able to find any other details than that. I've updated my drivers, clean installed the game, repaired mods, changed my settings, and I cant think of anything else. Ive contacted BI support, but havent gotten an Email back. I've already asked this before, but I figured maybe this time I could offer RPTs or something of the likes?
@tidal wraith Generate a report this happens next, submit to feedback.bistudio.com if you have a ) change your user profile b) ran withought mods
Ive done all those things. As I said, Ive contacted BI support but I was hoping for some help so I could play this weekend...
I had a CBA_3 error, but I re-installed it and that seemed to fix the error, but not the crashing
have you googled this to see if anyone else has posted a solution to this issue or has shared a similar experience?
Load withought mods regardless
But you do understand what changing your user profile entails correct?
I guess not? I've changed my user profile, and it didnt fix it regardless
Ive also loaded without mods, it still crashes
Do you mind generating a crash report and uploading it to say dropbox so others can review it here?
Sure, no problem.
Think he died? @hollow umbra
ping me when I am needed
@hollow umbra
Lots of mods in there for a Vanilla rpt.......
Hello , I'm facing a problem in Arma 3 , I play for 15-20mins without any problems but after that the game freezes , so I have to turn off my PC .
@tidal wraith you seem to be having a buttload of errors in your modset. Id recommend trying out without mods and then turning on each one by one and figuring out which is the cause
if its not vanilla BI support cant really help you
When troubleshooting, you should always start with a clean slate.
Throwing tons of mods on top of the problem (some out of date) does not help the situation.
All my mods that I have loaded are currently up to date.
But I will try vanilla arma again, see if it crashes this time
judging from the rpt errors even if theyre up to date theyre not working right
Alright, I'll talk to the Admin of my group, maybe its the modpacks we use
Im just hesitant to think its the modpacks, because no one else in my group has the problem.
Im still crashing in Vanilla. I'll include the Vanilla RPT
That's probably pretty helpful yeah
you got some really weird stuff going on there
12:11:50 Extreme texture size (32767x65535) 12:11:50 Texture init failed. 12:11:50 Extreme texture size (32767x65535) 12:11:50 Texture init failed.
O_o
perhaps its the scenario youre trying to run
Might be
Have you tried doing some funky stuff to your game files?
try just simple empty vr/stratis/altis
I didnt realize it was on.
copy
if that works you can try turning on fancy stuff
alright
For the most part, Vanilla runs fine.
Except when I exited the mission
But that may be because I have the video on in the main menu
@uncut trellis
the most recent crash log, with only CBA_3: https://www.dropbox.com/s/3g6qgzomigl9bgj/ArmaReport_Log_20171216T185114_Charles.zip?dl=0
video in the main menu?
where its not a static background
is what I meant
my brain just didnt register what I wanted to type
@uncut trellis Nevermind, Ive found my problem I believe.
is there a way to download from armaholic using wget or curl?
that would be better directed to armaholic support
It probably is but I doubt he'll get much of a response
then I'd have to download all of the CUP mods and upload them to my server from my machine
and with my slow ADSL that woult take a while
CUP supports Gdrive and torrent If that helps @median imp
And mod updates are also possible with steamCMD
as far as I know that means I need to buy the game again
I tried and it wouldn't let me
I have the same copy of Arma 3 installed on my laptop and my desktop.
Can I run a listen server on my laptop, and join it as a client on my desktop?
I want to do so over internet, so a mate can join too. I was going to use TADST but we were going to play some DRO missions and I've read they don't work via Dedicated Servers
where does one set the viewing distance of portal windows of drones, it's not the vehicle, ground, or airplane , or generic arma setting
I notice the droen pane is fogged up
but when I enter the drone its all clear
PiP view distance is heavily limited to for the sake or performance
Setting PiP to Ultra is still maxed out at 2km
can only increase it futher than 2k, with mods
kay
anyone having guns disappear from player hands in arma since 1.78 ? .. on exile its happening to many servers .. trying to see if its arma or exile doing it
Exile.
Disney.
@fringe salmon Gonna be Exile
Ok
Getting told by a server that I am not in my territory when @fading pulsar has increased my flag radius to 1k, and I am definitely in that zone. Any ideas?
Would be the Exile discord you'd want @soft forum
Eh you ask there
Lazyyyyyyyyy
😂 your server, your issue.
No, really. If it’s an Exile issue, ask there not here ⚠️
Yeah a link to it can be found in #channel_invites_list :^)
Or use Google
Or that.
Hey! Can you please help me?
When any client tries to connect to my server they have this error:
BE connection with remote machine could not be established. Error=3
I've redownloaded full server package via steamcmd today
This is the content of my BEServer_x64.cfg
// https://community.bistudio.com/wiki/BattlEye
RConPassword xxxxxx
Ports 2302-2306 all need forwarded
Ok I'll try it.
possibly also disable firewall for them
if its forwarded two firewalls
on the gateway and the host
I need hlep with the squad.xml setup. Everything shows but my image. I've tried using armasquads, and, after no luck, i'm currently using a hosting site. Img is 256x256. i tried the .paa and i'm currently using .jpg. I feel like i've seen every youtube vid, reddit post. I just don't know what i'm missing.
Your ingame must match the name that's given in the XML iirc
My profile name?
it is, and i get the clan tag, and all the info i've put in. just not the image
image name in xml matches actual img name i just used logo.jpg and they both are in the same folder
I can post link to them if needed
Then I guess the image isn't sized correctly
256x256 won't work?
Or too big, not sure
Try making it smaller, I'm not 100% if there is one but ¯_(ツ)_/¯
worth a shot
made it 64x64 and it's 8.6 kB. Still not working
All logos must a have resolution of 2^x / 2^y (e.g. 16 / 16, 32 / 32, 64 / 64, 256 /256) as per community wiki
i can link to the files if someone knows what 2 look 4
so frustrating (╯°□°)╯︵ ┻━┻
isn't that how i did it?
i was just trying a smaller resolution
the issue is the image won't load into the game, but the rest of the squad stuff does (like the tag, name, info and such
Okay, 64x64 is a smaller resolution, but that's mainly reserved for icons. What in arma are you using this for?
squad.xml
Is squad.xml still a thing?
Yes
I thought that was "kinda" replaced with "Units"
Dscha, just becauz ur a c00l kid and uze units
(or however it was called)
doesn't mean everyone needs to conform
Who said that?
Anyhow
derp
JOKE
i'm just using a jpg or png. does it need to be paa?
Debatable.
wiki says jpg/png is usable
it's a solid image
so i'm not worried about background
Yeah, but .paa is the "native" Texture format, so
why i'm not using paa
To clearify: You CAN use .jpg, sure.
wrong DiscordServer @rapid cosmos ? 😂
meant to search not post, lol
lol
wepons being deleted huh?
Epoch thing iirc
lovely
i'sn't paa used for transparency?
No
oh ok, sry i'm new to this.
JPG -> Transparent, PNG -> No Trasparency, .PAA -> Just native image format for Arma 3, like what else is there to explain?
🤦
let me try the paa. i'm useing the arma tool to make it paa btw
Since when does .jpg supports transparency? 🤔
I must be a lunatic, because last I checked that was th ecase
i think you are 😄
😑 I'll go back to my safe space before Dscha starts telling me about SQF
png supports transparency
if(( @Midnight#4592 getVariable ["IQ",0]) < 90)then
{
for "_i" from 1 to 100 do
{
@Dscha#7384 punch @Midnight#4592;
};
};```
😢
damn tester 😛
Sobs
*nods*
can i just drop the jpg into texview to convert it to paa?
Should be, yep
ok
Eehhh
if you can, use the image conver tool. iirc it can change color profiles if you use texView
🚶 💨
Run away
Just select under "Save As(s)..." the filetype .paa
i did, i'm uploading it to hosting site rn and changing xml path
If everything else fails -> Use "Units" 😄
Yeah Dscha, b u t . W t f happens when TexView screws ya up and you can't do either one 😦
I can still punch you.
😢
Your tears -> my lube.
You know
HAH, It's not just my tears
ok, no luck. img still not showing
Size?
🤔
nah, i don't remember anything about squad.xml's anymore.
Where do you upload it?
Is the Path correct?
etc
+What speaks against using "Units"? 😄
what's your root directory look under a ftp connection?
Ewwww GERMAN
Shaddap Tester
even better ^^
then use the .jpg
do i need to mess with the api?
hu?
🤦
Did i mentioned "Units" already?
Yep
I think from the launcher you can create it directly
Not unless you have a bohemia account linked iirc
because it's attached to your bi acc
i need to create one?
try your launcher first
Yeah but why
dfngidfsbgidfsgoidöfsgbi
a bohemia account is good to have
I mean, acess to biki, forums (biki only as of recent gulp)
what is biki?
😂
just through the bi site?
Yep
¯_(ツ)_/¯
(╯°□°)╯︵ ┻━┻
.Mr. FanDSCHAstic - Today at 5:21 AM
Is squad.xml still a thing?
Midnight - Today at 5:21 AM
Yes
.Mr. FanDSCHAstic - Today at 5:21 AM
I thought that was "kinda" replaced with "Units"```
I told you about an hour ago ¯\_(ツ)_/¯
"ask" 😛
I enjoyed bashing @hollow umbra . Always a pleasure.
Bastard 😢
tester
¯_(ツ)_/¯
You know
if Dwarden promotes new Veterans one of these days, I may have a blue name too Dscha. JUST MAYBE
Then I will no longer be only a tester
I know
why would you say that
feels good for me
Bastard 😦
Because i am a Sadist?
Likely so
Cya loser 👋
excuse me? Peasant Tester?
I said nothing veteran god
Yeah, i thought so. Peasant
:'(
Thanks guys, it's working perfectly now through units. @faint dawn u da man
My game keeps crashing whenever I try to start it. Black screen, error message when I alt tab out. I haven't played it in months, so I'm not sure when this problem started. Anyone know of a fix? I tried the Dev branch without success. No mods. Tried reinstalling and verifying integrity, deleting all user settings, etc. but no success.
What does the error message say?
@oak stream
Ok, I just managed to start 32 bit. It's the 64 bit version that keeps crashing. 🤔
Do you have a 32 bit operating system?
Game keeps on kicking me out of the server for battleye client not responding
i5-6400, GTX 1060 6gb, 16 gigs of ram, 50 download speed 20 upload
@median marlin Why don't you actually include the error?
Battleye kick: client not responding
I didnt know how..
And im not at my PC rn
I already have :
Reinstalled battleye, Restarted PC, Verified game files, Making sure it isnt interefered with firewall,
Turned off my anti virus.
I'm having a computer issue that I'm hoping one of you guys can help me with. I run a gaming laptop with a 960m gtx nvidia graphics card. This has occured so far when playing both Rocket League, Rainbow Six Siege, and Arma 3. I will alt + tab from the game, then tab back in and the game will be frozen and a windows error of program has stopped responding to appear. It doesn't happen everytime I alt+tab, but regularly enough to be very annoying. Here is the real confusing part. After one of these alt+tab crashes occurs, any modern game I try to launch will tell me my graphics card does not support DX11, and won't let me run the game. After I restart my computer it will allow it again. I ran a memory test this morning, and I also checked the windows device manager. After a crash, the graphics card is still listed in the device manager. If anyone has any ideas that would be great, been restarting my computer many times a day.
Happens to me with Fallout New Vegas
@desert isle Are you running a 960 as well? It may be exclusive to the card. I only just had problems with it with the new drivers
970
can someone help me? I just started playing yesterday and grinding on koth and I accidently went on a x150 server till i noticed i got like 20 k out of nowhere? is there something i can do to not get banned as I have no idea what to do as its clearly not legit
i dont know if here is the right place to ask sorry
accidently went on a x150 server
[press X for doubt]
Considers pressing X , Continues to press X after consdering pressing X
mission "doubt" accomplished
Damn germans, don't even know how to spell doubt
liar 😄
Enjoy your ban, cheater.
is anyone else getting kicked from servers with battleye client not responding?
the server admin in the server im trying to join said that a lot of people are having that issue after todays update
@jaunty badger @wise barn you think I intentionally went onto a 150x server? I literally started playing yesterday and spent all day grinding to go to another server when my the game was finished, then play on that server for about 5 mins and notice I got a bunch of cash (20k) out of nowhere
I dont know why you would think I would intentionally cheat, it was a honest mistake and if it was intentional do you really think I would come here to admit it and try find how i can resolve it in the first place
If i had malicious intent to cheat don’t you think I would have kept on playing on it and told no one? I spent all day learning this game and trying to make money only to learn I may be banned for a small mistake and be accused of being a cheater. Like what 🤨
dafork you talking about?
Why do you keep arguing with people that neither care nor can help you?
He was already told exactly that yesterday
@quaint jewel because im being accused of something im not, and can i not defend myself or what?
It's useless here
We get people like you about once a week. That say "OHH I accidentally did something and now I'm banned but I didn't know about it. It wasn't even me! A friend was playing on my computer"
99% are just liars that got banned because they cheated intentionally
☝
I wasn’t even banned and i came here after five minutes of leaving the server 😐
Whatever have a nice day 👋
finaly
You too o7
Just updated to the creators update (fresh install and all) I think my game might be stuttering more than before. Anyone else get more stuttering when they upgraded to 1703 or 1709?
Also is it normal for Arma 3 to only be mainly utilizing one CPU core?
I got an i7 6700k, and in MSI afterburner its mainly showing CPU Core 3 as around 75% usage and other cores are around 25-30% usage.
Yes Arma only uses one core.
Gotcha! thank you.
Is there any fix for frametime stuttering? FPS will be fine, but the frametimes will be spiking, causing 60FPS to look like 30...
Install Arma on an SSD?
Yeah it is on an SSD
this is what it looks like on MSI afterburner
http://s86.photobucket.com/user/Wooohah/media/Arma 3 frametime stuttering 2_zpsbll0u7gg.png.html
Turn off vsync
Why do you keep arguing with people that neither care nor can help you?
That sure was a hostile response for people who don't care... 🤷
I'm not triggered, you are triggered!
Vsync isnt on for me in game
Im getting a really choppy stutter... im not sure if its the creators update or not
No issues on my end with the new update
Does anyone know a fix for being kicked off Signature check timedoud?
So, one of my friends is having a massive issue with ArmA 3's Map Interface.
Why not have your friend post here?
Makes me think.. What is a "Map interface"? I'd guess the interface between a map and your brain are your eyes right?
So.. Your friend is having a massive issue with his eyes?
Need more details
Every single map, the grid numbers on the left and the right are different from mine.
In-game, you press M to open a map. The grid #'s are different from the left/right of mine.
I think you're reading the coordinates incorrectly then
I'm not reading the coordinates incorrectly. I mark a position on the map, the grid location is "023023". He sees it and tells me what grid location the marker is for him. He states it is something like "023075".
@lucid nimbus does it matter tho?
It does matter.
Why don't you do my first suggestion and then continue if it matters
Is he on a different map than you?
Because I think this is a communication error
But yeah. Get screenshots just to be safe
I'm giving you an issue and you're stating that I am "Reading the map incorrectly". I am not reading the map incorrectly. I know this is the issue. His grid numbers are different from mine.
Which map is it?
And you both have the exact same version of it?
It's different.
It's every map, to be frank.
I've only confirmed it on Wake Island.
Try the vanilla maps
without mods too
Do you know how to count? Are you sure your sure?
I had that thought back in primary school. How do we know that somebody elses "Red" is the same as our "Red" Maybe our green is red for somebody else.
Same could go for reading numbers I guess
@lucid nimbus whats that compass thing?
@uncut trellis Ace Map Tools
Try completly vanilla Arma without any Mods -> Posts screenshot with mods
Looks to me like they are slightly different versions of the same map
@quaint jewel The screenshots are from 2 different people on the same server
Mods don't change the grid numbers -.-
Different versions of the map can do that though.
@quaint jewel What do you even mean different versions of a map
without mods?
Also on Altis without any mods?
Mods can change config entries in maps. And I'm quite sure that involves grids
@tawny ice Different versions of the map.
I'm pretty sure grid lines are based on the northing/easting on TB.
they're configured individually
When you do an update to a map. Like adding new buildings you usually just make a new version.
Point being?
Different versions might have different grids
which is exactly the observed problem
you guys just trolling right?
they are on the map together standing next to each other
And?
What are you trying to prove with that?
They are running different versions of the map and standing next to each other.
Where the "standing next to each other" is completly irrelevant
Are you in kahoots with Doberman?
Kahoots as far as trying to sort this problem out
What mods do I know? None. But do you know how many mods there are?
Mods can modify other mods configs
Reproduce it with 100% modless vanilla Arma on a Vanilla map.
If you can't then it's a mod causing that problem
Yea but @hollow umbra do you know of any that do
you guys want help or not?
Also with vanilla Arma you can be sure you have the same version of the map.
Hop in when you're ready TB god @uncut trellis
Oh jeez
this was even in #arma3_terrain
what a mess
Honestly, I think it's a diff/corrupted version of a map. - Dobberman
Wonder where he got that one from
The versions are the same @hollow umbra
How do you know?
We're supposed to be looking at vanilla screens right now
not modded ones
Go back to vanilla is going to show me if its a mod issue or an Arma issue
Im curious if any of yall have seen this issue before or know any mods that can cause this
no
Thanks goat
Nope, never
It'd be nice you know, to get some vanilla screenshots
@tawny ice thats it
Whom? Dedmen?
no more help for you guys
yea
night
cya
Waaa
We are working on that now @hollow umbra
I also never saw that issue. But I also don't play with different versions of the same map
What @hollow umbra
You're in kahoots with Dobberman
I said I was
You dodged the question when I asked first, but it's whatever. Why not just post vanilla screenshots to begin with?
because this proble was brought about during a training on Wake Island
Midnight - Today at 8:57 PM
Are you in kahoots with Doberman?
B. Gluttony - Today at 8:57 PM
Kahoots as far as trying to sort this problem out
Dedmen was already asked you two to produce vanilla screenshots and see if the same thing happens
It's not a mod issue.
because we are all using the same mods from the same source ran on a pbo locked server
Alright, you're both doomed.
You can't seem to understand how to diagnose this problem properly
you cant seem to understand how servers work
Has nothing to do with operating a server
It does thoooo
Please do tell me, how mods don't affect you at all and how you've got everything figured out
It can't possibly be a mod version difference
Because the mods are the same as everyone else on the server
I'm giving you an issue w/ things that we already know. We know that this isn't a mod issue. Our mods in no way affect the difference in grid numbers on the left or right side of the map. He has confirmed that it has been doing this since the start of his "ArmA 3" life. The issue lies somewhere with ArmA 3 itself.
I just confirmed every single mod that he has is the same as ours.
"PBO locked server" meaning bisign probably. Two versions of the same map that are signed with the same bikey. No problem for a "pbo locked server"
pbo lock implying the mods are the same and he isnt running anything else
your lack of basic arma knowledge is hilarious
I'm done lol. I'm finding somewhere else to find a solution for this.
Yea yall suck l2p
He is missing it to you guys are in Kahoots!
This is pretty much #350 gold, excpet with wannabees
Yea I think you could probly get a return from steam with those low ass hours
Well you could check my hours
this is likely what @desert isle was talking about
I do have my steam acount linked
Yes, because I am totally a guy from the "recent sales".
@uncut trellis What did FM say? 😛
something something about sales doubling his work
yea and you got a dunce cap on in the corner
There is no way in Arma to let the server verify that you are running the exact same versions of a Mod
Seasoned arma player over here knows it all
Not all just most
Why do you keep arguing that your mods are not the problem instead of checking in Vanilla Arma and providing screenshots? If you are so sure that the mods aren't the problem why don't you just reproduce it in vanilla as you are so sure that it happens the same there
Why not post your results then?
Too lazy to read everything above, what is he claiming?
Verify your game cache?
Yea there is with Ace No.
It will alert you when the PBO's dont match with the server No it doesn't.
SignatureCheck, Dedmen
@faint dawn "Arma is displaying grid coordinates incorrectly" "I know everything" "Blah"
Yeah. That doesn't too @faint dawn
You can sign two different mods with the same bikey. The server won't object
Ah, right
Oh and Doberman and Gluttony are buddy buddy
Yeah, true
Yea if you set up like that @quaint jewel
@faint dawn We stated that we had an issue, they told us to do something a certain way, we told them that we know that the way they are telling us is not the reason, they continued to tell us that we should do it a certain way, we said no. now it's a fight over "whos dumb because of the recent sales"
Oh because you know that isn't the case, it must be the case
And we are talking about a problem that can be caused by two people running slightly different versions of the same map.
And if they are made by the same author they are most likely signed with the same bikey.
Which means the server won't say anything if you use different versions
"Arma is displaying grid coordinates incorrectly"
uhm, what?
"You should use intercept" , "NO >:(" "You should use intercept" "NO >:("
Yes, Kiliman.
@tawny ice No. ACE checks version numbers that are listed in a config. Nothing forces anything to update these version numbers if you change a mod
@faint dawn Yeah we have no idea
¯_(ツ)_/¯
Ok all seriousness @quaint jewel how can you run two different versions of the map when they are pulled from the server the two people are on... asking for a friend
AHAHAHA
Look at both of the screenshots.
HOLY CRAP
I'm not talking to you.
@tawny ice Person A downloads the map. Server updates to new version. Person B downloads new version. A and B join the server. A and B have different versions
what's with that stuff on the map?
Well you're talking to everyone, if you were talking to someone individually PM them
ACE Map tools
It's an ACE Map Tool.
Ah, kk
but once they join they would get the same mission file it would redownload once A and B are together
AHAHAH
MissionFile != Addon
Same mission file has nothing to do with possibly different maps
Mission file is not a map
rolls on floor laughing
okay okay okay okay... cool down everyone 😄
@hollow umbra There is a 🤣 btw
🤣 OOh.
When you say map are you refering to the Map Wake Island created in the Editor uploaded to a server then launched, or the Map I pick-up from the VA
- What Dedmom says is correct. You can connect with different Versions of the SAME Map. If they were signed with the same File as the Version before -> NO KICK
As any issue. If you claim it's an Arma issue and you only report it while running mods that report is worth absolutly nothing. Even if you send it to BI they will tell you to reproduce it without Mods.
@faint dawn It does the incorrect numbers on every map. Regardless of mods.
@tawny ice You are confusing "Map" and "Mission" apparently
you can't create Maps in the ingame editor
Wich incorrect Number?!
GRID numbers on the Y axis
The grid numbers on the left and right side of the map.
so you mean Ded the Wake Island map Mod
The numbers are different from everyone else.
I mean the Map.
Is it even considered, that the fkn drawing mechanic might have been transported falsly?
you think person A has version 2.0 and B has version 2.1 of the mod
drawing mechanic?