Hi @round pewter. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave:
#Convex auth not supported by resolve
brave wingBOT
I'm sorry, but the knowledge sources provided do not contain information about the error ERR_PNPM_SPEC_NOT_SUPPORTED_BY_ANY_RESOLVER @convex-dev/auth/nextjs isn't supported by any available resolver. related to Convex auth. It's possible that this error is related to your package manager or your project setup.
I recommend checking your project's dependencies and ensuring that they are correctly installed and up-to-date. If the problem persists, you might want to reach out to the Convex support or community for more specific assistance.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing How to setup convex auth with nextjs using password, name and email
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
To set up Convex auth with Next.js using password, name, and email, you can follow the steps below:
-
Set up Auth.js: Follow the Installation instructions for Auth.js (https://authjs.dev/getting-started/installation?framework=next.js). Then pick and configure providers as shown on the Authentication (https://authjs.dev/getting-started/authentication) page. Don’t worry about setting up a database adapter, as you’ll do that in the next step.
-
Set up the Convex database adapter: Follow the Convex Adapter for Auth.js article (https://stack.convex.dev/nextauth-adapter) to install and set up Convex as your database adapter, and to authenticate your Convex functions.
-
Use the ConvexAdapter in your Auth.js config:
import NextAuth from "next-auth"
import { ConvexAdapter } from "@/app/ConvexAdapter";
export const { handlers, auth, signIn, signOut } = NextAuth({
providers: [],
adapter: ConvexAdapter,
})
(Source: Convex Adapter for Auth.js Setup Guide (https://stack.convex.dev/nextauth-adapter))
Please note that the Convex team does not guarantee the security of this setup. It is your responsibility to ensure it matches your requirements. For any security issues in Auth.js refer to their docs (https://authjs.dev/security) and for any issues with Convex itself please reach out to them at [email protected].
Also, it's important to note that implementing password and email authentication might require additional steps such as setting up an email client for password recovery. This was mentioned in a Discord support thread (https://discord.com/channels/1019350475847499849/1171105854314008586) by a community member.
If you're not familiar with these topics, you might find it easier to use an authentication platform like Clerk (https://docs.convex.dev/auth/clerk) as suggested by the Convex support staff in another Discord thread (https://discord.com/channels/1019350475847499849/1149727467783860317).
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing ⨯ TypeError: Cannot destructure property 'signIn' of '(0 , convex_dev_auth_react__WEBPACK_IMPORTED_MODULE_3_.useAuthActions)(...)' as it is undefined.
at LoginForm (./components/LoginForm.tsx:18:13)
digest: "2962621594"
8 | const [email, setEmail] = useState('')
9 |
10 | const { signIn, signOut } = useAuthActions();
| ^
11 | const [step, setStep] = useState<"signUp" | "signIn">("signIn");
12 |
13 | const handleSubmit = (e: React.FormEvent<HTMLFormElement>) => {
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
The error message you're seeing suggests that the useAuthActions hook from @convex-dev/auth/react is returning undefined, which is why you're unable to destructure signIn and signOut from it.
This could be due to a few reasons:
-
The Convex Auth library is not correctly installed or imported. Make sure you have installed the Convex Auth library correctly and the import statement is correct.
-
The
useAuthActionshook is being called outside of a Convex Auth Provider. TheuseAuthActionshook must be used within a component that is wrapped with a Convex Auth Provider. This is typically done at a high level in your application, such as in your application's root component.
Here's an example of how to use the useAuthActions hook within a Convex Auth Provider, as shown in the Stack > Introducing Convex Auth > Code deep dive > Frontend configuration (https://stack.convex.dev/convex-auth):
import { Authenticated, Unauthenticated } from "convex/react";
import { SignInForm } from "@/auth/SignInForm";
import { Content } from "@/Content";
export default function App() {
return (
<>
<Authenticated>
<Content />
</Authenticated>
<Unauthenticated>
<SignInForm />
</Unauthenticated>
</>
);
}
In the SignInForm component, you can then use the useAuthActions hook:
import { useAuthActions } from "@convex-dev/auth/react";
export function SignInWithMagicLink() {
const { signIn } = useAuthActions();
// rest of your code
}
If you're still encountering issues, I recommend checking the Convex documentation or reaching out to the Convex community for further assistance.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing https://nextjs.org/docs/messages/module-not-found
⨯ ./app/layout.tsx:5:1
Module not found: Package path ./dist/nextjs/server is not exported from package D:\easy\node_modules@convex-dev\auth (see exports field in D:\easy\node_modules@convex-dev\auth\package.json)
3 | import "./globals.css";
4 | import { cn } from "$/lib/utils";
5 | import { ConvexAuthNextjsServerProvider } from "@convex-dev/auth/dist/nextjs/server";
| ^
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
The error message you're seeing suggests that the module @convex-dev/auth/dist/nextjs/server is not found. This could be due to a few reasons:
-
The Convex Auth library is not correctly installed. Make sure you have installed the Convex Auth library correctly. You can do this by running
npm install @convex-dev/authoryarn add @convex-dev/authin your project directory. -
The import path is incorrect. The path
@convex-dev/auth/dist/nextjs/servermight not be the correct path to import theConvexAuthNextjsServerProvider. You should check the Convex Auth documentation or thenode_modules/@convex-dev/authdirectory in your project to find the correct path.
However, based on the knowledge sources provided, there's no specific information about the ConvexAuthNextjsServerProvider or the correct import path for it.
For more detailed help, I recommend checking the Next.js documentation on module not found errors (https://nextjs.org/docs/messages/module-not-found) or reaching out to the Convex community for further assistance.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing not seeing user login in detail in convex dashboard and am not seeing any error.
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
If you're not seeing user login details in the Convex dashboard and there are no errors, there could be several reasons for this. Here are some steps you can take to debug the issue:
- Check your function logs: Add a
console.logstatement at the beginning of your function (query, mutation, action, or HTTP action) to log the server identity. Here's how you can do it:
console.log("server identity", await ctx.auth.getUserIdentity());
Then call this function from whichever client you're using to talk to Convex. Open the logs page on your dashboard and check what you see. If you don't see anything, there could be several potential causes, such as not having the right dashboard open, your client not being connected to Convex, or the code not being pushed. (Source: Debugging Authentication (https://docs.convex.dev/auth/debug#step-1-check-whether-authentication-works-on-the-backend))
-
Check your client-side code: Make sure you're calling
ctx.auth.getUserIdentity()from a query or mutation in your app. This will allow you to test that the authentication of function calls works. (Source: Convex with Auth.js (NextAuth) (https://stack.convex.dev/nextauth)) -
Check your backend configuration: If you have a valid JWT token on the frontend, and you know that it is being passed to the backend, but the backend is not validating it, you should check that your backend configuration matches your frontend configuration. (Source: Debugging Authentication (https://docs.convex.dev/auth/debug#step-3-check-that-backend-configuration-matches-frontend-configuration))
If you're still having trouble, you might want to follow the authentication debugging guide (https://docs.convex.dev/auth/debug) for more thorough debugging steps.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing this is how am using it
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
I'm sorry, but I can't provide a helpful answer without more context. Could you please provide more details or share the code snippet where you're trying to implement the user login with Convex? This will help me understand your situation better and provide a more accurate response.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing this is how am using it but not seeing user details
const { signIn, signOut } = useAuthActions();
const [step, setStep] = useState<"signUp" | "signIn">("signIn");
const handleSubmit = async (e: React.FormEvent<HTMLFormElement>) => {
e.preventDefault()
const formData = new FormData(e.currentTarget);
try {
await signIn("password", formData);
setShowModal(true)
setTimeout(() => {
setShowModal(false)
router.push('/chat')
}, 2000)
} catch (error) {
console.error('Authentication failed:', error)
}
}
Let me check the knowledge base for you. One moment! :books:
Your code snippet shows that you're using the signIn method from useAuthActions to authenticate the user. If you're not seeing user details, there could be a few reasons:
-
User details are not being stored correctly: After the
signInmethod is called, user details should be stored in your Convex database. You can check your Convex dashboard to see if this is happening. If not, there might be an issue with how your Convex database is set up. -
User details are not being retrieved correctly: If user details are being stored correctly but you're not seeing them in your application, there might be an issue with how you're retrieving user details. You can use the
useUserhook from@convex-dev/auth/reactto access information about the authenticated user. Here's an example:
import { useUser } from "@convex-dev/auth/react";
export default function Badge() {
const { user } = useUser();
return <span>Logged in as {user.fullName}</span>;
}
(Source: Convex & Clerk > User information in React (https://docs.convex.dev/auth/clerk#user-information-in-react))
- There's an error during authentication: Your code includes a
catchblock that logs an error message if authentication fails. Check your console to see if this error message is being logged.
If you're still having trouble, you might want to follow the authentication debugging guide (https://docs.convex.dev/auth/debug) for more thorough debugging steps.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing I'm seeing this error
POST /api/auth 404 in 22ms
⨯ Error: [Request ID: a6acb82ef627d9c5] Server Error
Uncaught Error: Missing password param for signIn flow
my code
const { signIn, signOut } = useAuthActions();
const [step, setStep] = useState<"signUp" | "signIn">("signIn");
const handleSubmit = async (e: React.FormEvent<HTMLFormElement>) => {
e.preventDefault()
const formData = new FormData(e.currentTarget);
try {
await signIn("password", formData);
setShowModal(true)
setTimeout(() => {
setShowModal(false)
router.push('/chat')
}, 2000)
console.log("FORMDATA",formData)
} catch (error) {
console.error('Authentication failed:', error)
console.log('Authentication failed:', error)
}
}
and am also using it with google
<button
type="submit"
onClick={() => {
setStep(step === "signIn" ? "signUp" : "signIn");
}}
>
{step === "signIn" ? "Sign up " : "Sign in instead"}
</button>
<span>or</span>
<button onClick={() => void signIn("google")}>Google</button>
Let me check the knowledge base for you. One moment! :books:
The error message you're seeing suggests that the password parameter is missing when calling the signIn method. This could be because the form data you're passing to signIn does not include a password field.
Here's how you can debug this issue:
-
Check your form fields: Make sure your form includes an input field with the name
password. TheFormDataobject you're creating should include this field. -
Log your form data: You're already logging the form data with
console.log("FORMDATA",formData). Check your console to see what this log statement outputs. If thepasswordfield is missing, this means your form does not include apasswordinput field, or the field is not correctly named. -
Check your
signIncall: Make sure you're passing the correct arguments tosignIn. The first argument should be the name of the provider (in this case,"password"), and the second argument should be the form data. Here's an example:
const formData = new FormData(e.currentTarget);
await signIn("password", formData);
If you're still encountering issues, I recommend checking the Convex documentation or reaching out to the Convex community for further assistance.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing duplicate user bug am using convex auth with google and provider
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
If you're experiencing an issue with duplicate users when using Convex Auth with Google and another provider, it's likely due to the fact that Convex Auth creates a new user record for each authentication method used. This means that if a user signs up with a password and then signs in with Google using the same email, two separate user records will be created.
To avoid this, you can implement account linking, which allows you to link multiple authentication methods to a single user record. This is explained in the Convex Auth Advanced Guide (https://labs.convex.dev/auth/advanced#account-linking).
Here's a brief overview of how you can implement account linking:
- When a user signs in, check if a user record with the same email already exists.
- If a user record with the same email exists and is verified, link the new authentication method to the existing user record.
- If a user record with the same email exists but is not verified, delete the unverified user record and create a new one with the new authentication method.
Here's a code snippet from a Discord support thread (https://discord.com/channels/1019350475847499849/1242494747147374754) that shows how you can implement this logic:
const existingUser = await getUserByEmail(email);
if (existingUser && !existingUser.emailVerified) {
await deleteUnverifiedUser(existingUser._id);
}
await createUser(email, hashedPassword);
Please note that this is a simplified example and you'll need to adapt it to your specific use case. For a more detailed guide, I recommend checking the Convex Auth Advanced Guide (https://labs.convex.dev/auth/advanced#account-linking).
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing http_client.js:330 Uncaught (in promise)
Error: [Request ID: 421b98a513eba8d6] Server Error
Uncaught Error: Uncaught Error: Invalid argument id for db.get: Unable to decode ID: Invalid ID length 5
at ConvexHttpClient.action (http_client.js:330:15)
at async eval (client.js:88:28)
at async eval (client.js:152:21)
Show 4 more frames
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
The error message you're seeing suggests that an invalid ID is being passed to the db.get function. The ID you're passing seems to have a length of 5, which is not valid according to Convex's ID format.
Here are some steps you can take to debug this issue:
-
Check the ID you're passing to
db.get: Make sure the ID you're passing todb.getis a valid Convex ID. Convex IDs are strings that are automatically generated when you create a new document in your Convex database. They should not be manually created or modified. -
Validate the ID before passing it to
db.get: You can use thev.id(...)function to validate the ID before passing it todb.get. This function will throw an error if the ID is not valid, which can help you catch and handle the error before it causes a server error. Here's an example from a Discord support thread (https://discord.com/channels/1019350475847499849/1210735934749020232):
const id = v.id("myTable", myId);
const doc = db.get(id);
- Handle invalid IDs: If an invalid ID is passed to
db.get, you should handle this error and provide a meaningful error message to the user. You can do this by wrapping yourdb.getcall in a try-catch block and logging or displaying the error message.
If you're still encountering issues, I recommend checking the Convex documentation or reaching out to the Convex community for further assistance.
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
round pewter
@brave wing this is what am doing that prompt the error
import { query } from "./_generated/server";
import { auth } from "./auth";
export const currentUser = query({
args: {},
handler: async (ctx) => {
const userId = await auth.getUserId(ctx);
if (userId === null) {
return null;
}
console.log(userId)
if (userId.length >= 5){
console.log("what is goin on?")
} else {
console.log("hello")
}
return await ctx.db.get(userId);
},
});
brave wingBOT
Let me check the knowledge base for you. One moment! :books:
The error you're encountering is due to the fact that the userId you're passing to ctx.db.get(userId) is not a valid Convex ID. Convex IDs are typically longer than 5 characters and are automatically generated when you create a new document in your Convex database.
In your code, you're retrieving the userId using auth.getUserId(ctx). This method returns the ID of the currently authenticated user. If the user is not authenticated, it returns null.
Here are some steps you can take to debug this issue:
-
Check if the user is authenticated: If
auth.getUserId(ctx)is returningnull, this means the user is not authenticated. Make sure the user is authenticated before calling this method. -
Validate the
userId: Before passing theuserIdtoctx.db.get(userId), you should validate it to make sure it's a valid Convex ID. You can do this by checking the length of theuserIdor using a regular expression to match the Convex ID format. -
Handle invalid
userIds: If theuserIdis not valid, you should handle this error and provide a meaningful error message to the user. You can do this by throwing an error or returningnull.
Here's an example of how you can modify your code to handle invalid userIds:
export const currentUser = query({
args: {},
handler: async (ctx) => {
const userId = await auth.getUserId(ctx);
if (userId === null || userId.length < 5) {
console.log("Invalid user ID");
return null;
}
return await ctx.db.get(userId);
},
});