✨｜sdxl

[vital ermine]

50 beams is about as much as 7b will do on 24GB

[hardy cipher]

this is the approximate setup I often use. probably not the best, but it helps. bump it up to 4x which is really 16x by pixel count, then drop back down once I do a bit of fine tuning

[elfin flare]

I do not use ComfyUI, but interesting indeed.

[vital ermine]

I can't use comfy

[elfin flare]

Neither can I at the moment.

[hardy cipher]

I'll adjust some of the specifics of it depending on what I'm going for, but in general 4x, work on details, 0.5x

[elfin flare]

Attempting to do so has caused device not found errors

WSL2 moment

[vital ermine]

well, for me it refuses all my loras because SAI has not implemented iA3 into it yet, or allowed Comfy to do it.

I use the dev branch of auto1111 instead

[hardy cipher]

still a1111 masterrace?

ahh

I mean, I had no real problems with a1111, but it just started to get bogged down for me

[vital ermine]

a few things in this I don't like and the way he does refiner is 100% dog turd

[hardy cipher]

I'm not one to get into the whole UI wars because that's silly to me. use what you like. it just didn't give me the freedom to do the same things I'm doing with comfy. but then I do like some of the extensions a lot

[hoary saddle]

Should we be running tmalloc and xformers if on 3x or 4x gpus?

[hardy cipher]

https://tenor.com/view/i-have-no-idea-liz-birdsworth-wentworth-i-dont-know-idk-gif-22820448

[vital ermine]

auto has an issue where if you use refiner I saw the mem get dangerously close to 40GB used.

[hardy cipher]

leaky boi

[vital ermine]

VERY

master made me BSOD due to it once

[hardy cipher]

beauty

[glad grove]

normal street in chicago

[elfin flare]

I don't believe that's an issue on vladmantics fork of it.

[vital ermine]

It does graffiti well.

[elfin flare]

Weird though.

[vital ermine]

vlad's doesn't yet do loras for SDXL as it is still in testing.

[elfin flare]

This is no longer true as of a few days ago.

[vital ermine]

does it do iA3?

[elfin flare]

What is iA3? Lol

[vital ermine]

acts like a lora but not really. really nice to train in

[elfin flare]

If that's a lora, then I haven't used it.

Oh, I see.

[vital ermine]

I do 2601 steps in 9m to train in it.

[elfin flare]

Oh, iA3.

LyCORIS.

I see.

[vital ermine]

for me that is slow but issues to old pc and drivers. lots of trainers are complaining and Nvidia said updates coming

[vital ermine]

Behold their god

[hasty smelt]

Hey guys, I've been encountering this error message every time I try to run an upscaler model. I've already attempted to switch the model, but the error persists whenever I try something other than Real-ESRGAN or RealESRGAN_x4plus. I'm not certain how to resolve this. Could someone please lend me a hand? The process always gets interrupted when it reaches the ESRGAN/4x_NMKD-Superscale-SP upscaler model.

[vital ermine]

Well, this rocks

[half ivy]

bro thats 🔥

[elfin flare]

ALIENZ

[heady vale]

it mentions recursive in the error, so likely you have some nodes incorrectly wired

[hardy cipher]

Smashmouth

where has the time gone

[elfin flare]

Real photos from the court case god damn @vital ermine

Good whistleblower you are

[vital ermine]

LOL

[elfin flare]

ngl the 2nd looks pretty friendly

[vital ermine]

Towards the first

not us

incoming anal probing

[vital ermine]

Ahem

Oh, sweet

[hasty smelt]

I tried even replacing the workflow, but the error persists whenever I switch to a different upscaler model. The passage usually works fine with other models.

Could it be that my link is broken?

[hoary saddle]

What should Linux swap size be for 32g ram?

Is it still 1 to 1 ratio like Windows used to be?

Ubuntu specifically

[heady vale]

if you have another workflow that doesnt have an error, you can shift select the same nodes and copy. In your sheet do a Ctrl+shift+paste (this pastes with nodes connected) and replace your own section

[vast galleon]

That's an awesome improvement on the background vegetation! It's something that always bothered me with SD. I look forward to trying it out. Have you released it at all or is it still cooking?

[carmine wagon]

Anyone knows what version of SDXL the Discord bots are generating images with?

[hoary saddle]

Default is 2gb. Could this be causing the random hard freezes?

[elfin flare]

Which bots? I thought they were still archived since SDXL 1.0 released.

[carmine wagon]

https://discord.com/channels/1002292111942635562/1100170312106127410

these bots

[elfin flare]

I am to assume SDXL 1.0.

[heady vale]

before sdxl release they were cycling all different models, so could still be doing that now

[elfin flare]

Not sure why they would do that now considering it is released now.

[high skiff]

Still very much cooking

[heady vale]

theyre still developing SDXL for the next release

[high skiff]

The new high-res fix only works at extremely specific values. So specific that I can only get it to work with one combination of values. I'm currently running extensive tests to see if I can get any different results at different values, however any change in any of the settings seems to just nuke it

Luckily, the settings aren't something that adaptively change, they are a one size fits all sort of thing

[carmine wagon]

Weird, im getting a lot better image generations from these bots then when i run it in Stable Diffusion on my pc through my GPU

[high skiff]

There are several reasons for that

The bots in the server have lots of tricks up their sleeves in order to get better results than the standard user. The styles that you use are padded with additional positives and negatives in order to increase output quality, they use specialized workflows and back-end processes to also improve quality

And they are also testing out new features such as control net and other embeddings

[elfin flare]

As I and possibly multiple other people do, assigning various control positives and negatives for model tuning is a great choice.

I usually go for an LLM for these.

[high skiff]

SDXL definitely has a learning curve, even for like me who is extremely dedicated to collecting information on SDXL

I have over 15,000 generations of local SDXL already, and I'm still finding out new and constantly evolving information

[carmine wagon]

Hmm interesting, i did not know that, is there anyway to have results like these bots, but rendered locally?

[high skiff]

You can experiment with different types of prompting, as well as different workflows

I'm away from my computer right now, but I know they released the templates for prompts for the styles on the bots, which you could reference for your own prompts

[elfin flare]

https://cdn.discordapp.com/attachments/204342863947890689/1141493230748303490/grid-179173011620-20A_blue_glowing_sword_in_a_pedestal_in_a_magical_forest_voxel_style.png

With the correct tuning and prompts, amazingly coherent images can be made.

[high skiff]

SDXL is extremely language-based, so I highly recommend trying to ask it for the same image in different ways. SDXL responds very good to natural language as well

[elfin flare]

In terms of prompting, it is unlike 2.1 or 1.5.

It is much closer to Dall-E 2 in terms of understanding of language.

[high skiff]

It's closer to 2.1 then it is to 1.5, but fundamentally it's it's own thing because it utilizes two text encoders, one of which is trained for natural language

Yeah, like Dan just said, it's optimized more for natural language

So instead of prompting like: photograph, forest, woman, standing, pretty dress, black dress

You prompt like: a photograph of a woman standing in a forest wearing a pretty black dress

[elfin flare]

A cancerous mass of flesh that works like a particle accelerator. Analog photo. Horrifying presence, intimidating.

Or a combination.

Etc.

[carmine wagon]

Ah ok, good to know, very interesting, and currently to render locally you can only use SDXL 1.0 right?

[azure oxide]

there might be some model merges on civitai, youd search for them by filtering for checkpoint models and selecting sdxl

[elfin flare]

I personally use Crystal Clear XL.

[carmine wagon]

will def look into that one

[elfin flare]

https://civitai.com/models/122822/crystal-clear-xl

[carmine wagon]

So if im correct, there is not 1 checkpoint to rule them all?

[elfin flare]

Not yet. It's too new.

I don't believe the previous model really had one either. There were multiple good ones.

[vast galleon]

Well it looks awesome so far. I'm working on trying to get GroundingDINO into ComfyUI but I'm having a hell of a time trying to get it to even install. Also working on an improved color transfer node.

[glad grove]

the one with the cute asian girls thats the king

[carmine wagon]

Ok interesting, downloading crystal clear xl atm, will give that a go 🙂

Im looking for a really good architectural checkpoint, does anyone know of one?

[soft bone]

"(at midnight, midnight, black sky, very dark, very low light:1.3), 4k, (complete darkness, pitch black sky, dark night:1.3)"

riddle me this. guess XL still cant do darkness right

pisses me off

[glad grove]

whose dad is this?

[soft bone]

looks like stanley tucci lmao

[hardy cipher]

xl can do darkness if you want it to

[soft bone]

did you not see my prompt?

[hardy cipher]

I see it, but what are your settings?

[soft bone]

like steps cfg sampler? should have zero effect on ability to make darkness

[hardy cipher]

well sorry, bro. I didn't make it

and yes, cfg will always have an impact on darkness. that's how it works

everything impacts everything else

[soft bone]

27, 5, 2m karras

[hardy cipher]

https://civitai.com/models/128607/nightvision-xl-photorealistic-or-portrait-or-photography-or-hyperreal-or-architecture-or-interior-design-no-refiner-needed

are you using the base model?

[soft bone]

yeah. I know the problem, its the person lora im using. ik it can get dark but with any person lora it refuses to, and not because the lora was overfitted or anything. super sucky news for my purposes

[hardy cipher]

other issue is there is no one go to fix for anything really. it's a conglomeration of all the things. so what might work with one prompt and one seed might not work with another

[glad grove]

maybe a dark lightning lora could fix it but idk if theres one for sdxl

[hardy cipher]

https://civitai.com/models/119228?modelVersionId=129457

[soft bone]

i think theres an offset noise for darkness but i cant be using that for my case

[hardy cipher]

dark model, dark lora

https://civitai.com/models/125449?modelVersionId=137034

gloomy lora

[glad fulcrum]

Is SDNEXT working with SDXL Control Net models available alrady? I can't wait for auto1111... and don't like comfyUI (it gives bad results)

[hardy cipher]

no it doesn't

[glad fulcrum]

F

[hardy cipher]

you use it wrong and get bad results. everyone blaming the software when they're using it incorrectly

[soft bone]

get a better workflow. theres nothing auto can do better for quality than comfy

[glad fulcrum]

yes I know.

But Its difficult

so not everyone is a node genius

[soft bone]

scroll up in this channel, download any image you like, drag into comfy, replace prompt. done

[glad fulcrum]

I tried to use control net pose with my Lora and got it working but the results are terrible

[urban fjord]

It is easy to get the same results in ComfyUI as in Auto1111, the problems with ComfyUI is that it's UI lacks features and is not userfriendly.

[hardy cipher]

that's not the fault of the software

[glad fulcrum]

Also every minor change I want I have to change all the workflow

[hardy cipher]

no you don't

[glad fulcrum]

I downloaded differentworkflows and for each thing I need a different workflow

and still it is bad

well, do you have a workflow for working with a Lora and control net pose?

[hardy cipher]

this whole comfy saga has starkly displayed to me the vast gap in problem solving skills

[steel mist]

for real

[azure oxide]

you get used to it. a little patience goes a long way in the client or other person understanding as well

[steel mist]

I actually mentioned to somebody this is the first moderately challenging computer thing I've had to deal with in a few years

[hardy cipher]

no hate on people that process things differently. it's just the bad attitudes really. I really have no issue with people that are having a harder time

I like to help people if I can

[glad fulcrum]

do you have the workflow?

[steel mist]

"It's kinda nice to remember that if you take a deep breath, read carefully and don't get frustrated you can actually solve problems"

[steel mist]

Bad as in not working?

[glad fulcrum]

nahm it worked

it was just so bad

like overtrained

but the Lora isn't overtrained

[steel mist]

Also you said pose... gotta be honest if you're using that XL open pose I am not sold on it

[glad fulcrum]

you can't solve that problem huh?

[steel mist]

I'm not sure if it's bc it's not on the official diffusers or what, but lots of extra arms/legs/etc

[glad fulcrum]

you should take a deep breath

😉

[steel mist]

dude

ya know what nm

☮️

[glad fulcrum]

Yeah I knew, it wasn't that I can't solve the problem, it's that it doesn't work right.

[azure oxide]

this could be a scheduler and sampling interaction, some of them just dont work well together and a1 keeps it simple and hides schedulers from users

[hardy cipher]

I think lack of problem solving skills and bad attitude go hand in hand. one helps the other along. because a person that might not get something right away but is humble enough to realize they just don't quite understand will figure it out eventually

but a lot of people blame external factors rather than look at themselves. but such is life

[glad fulcrum]

I love how you reach such a conclusion in such an amazing speed

[hardy cipher]

not about you. also I think I tried to help you already didn't I?

and you just kind of demanded and then moved on

[glad fulcrum]

I don't know, I said two or three coments about the workflow not working and all I read was that people don't know how to solve problems

and that people are not kind or something

[hardy cipher]

you're blaming external factors for your shortcomings

anyway, have fun. it really makes no difference to me. just a bit disappointing sometimes

[glad fulcrum]

If you can't help, just don't talk so someone else can help

[azure oxide]

idk, try viewing it from the other perspective. im essentially seeing someone having issues with their generations and describing what they see and the responses they're getting is "you're the problem, not comfy". you mentioned attitude earlier so obviously anyone in their position wouldn't take kindly to that lol

[cinder aspen]

It can be both

The user and the software

[glad fulcrum]

I was trying a lot yesterday and asked kindly lots of times but people weren't helping either.

You can find my history of comments

[azure oxide]

no its definitely the user 😅 but there are kinder ways to approach this

[glad fulcrum]

I will try again and maybe post my workflow

although, if some of you say the OpenPose control net isn't working good, then it might not be me the problem

[glad fulcrum]

I downloaded the workflow of the open pose from the hugging face page where I downloaded the model, and I tried to add my lora... that's the result

[heady vale]

that workflow probably isnt made for XL, it should have these the CLIP text encoders as well as the prompts

[glad fulcrum]

I don't see the CLIPTextEncode SDXL node.

I don't see it in the manager either....

oh wait I saw it now

[heady vale]

not sure why, I thought they were default nodes

[glad fulcrum]

don't know where to put it though

Yes I have them,

I am not using the refiner I think

but that's not a problem

I want my Lora to work with control net

[heady vale]

prompt goes into those nodes, then the positive and negative go to Ksampler

so basically before the ksampler

yeah you can exclude the refiner in your case

so the SDXL - non refiner, you have one for positive and one for negative

[glad fulcrum]

conditioning doesn't glue to clip

it doesn't let me

[heady vale]

the text inputs?

[glad fulcrum]

nah I got lost already

I don't know where to put the node

I conected the end

don't know where to connect the clip from that node

[heady vale]

on the ksampler you have pos/neg conditioning, the SDXL nodes plug into those

[glad fulcrum]

forget about the negative for now

let's say I just want the possitive

[heady vale]

it needs it, even if its blank

[glad fulcrum]

oh

So I need two of those nodes?

[heady vale]

yea

[glad fulcrum]

It only lets me connect one, and to the possitive

trying to connect the otherone to negative doesn't let me

well, now it let me... wth

what's clip:_G and clip_L

[heady vale]

those are your text prompts

you can use one into both

one pos prompt node into both g and l

[glad fulcrum]

Do I need to write my prompt there then? and I need to put it twice?

[heady vale]

right click and convert to input, or type in there

most people convert

[glad fulcrum]

Okay, to G or to L'

and what's the difference?

[heady vale]

G is natural language, L is old style tags

but you can use the same into both

or to keep it simple leae them as is

[glad fulcrum]

my control net is detached though I think

[azure oxide]

yo bernie, do you remember what you did to fix this? im finally trying out ait and i'm getting hit with the same error
wait never mind i found out the issue, looks like sytan had to deal with it too. gotta download a compatible .so

[glad fulcrum]

@heady vale

Is this right? it kind of worked I THINK

[heady vale]

yeah should be . the image has the same pose

[glad fulcrum]

yes the pose worked, though the image in the miniature isn't reflecting what it is inside it.

it doesn't update but whatever

don't know if I set the SDXL node right

but kind of works

[hardy cipher]

quality

[vital ermine]

Some of these samplers are weird

I now actually prefer unipc

faster, with better quality, than ddim

[dense chasm]

https://www.reddit.com/r/StableDiffusion/comments/15tasw5/chinese_style_villa_sdxl10_lora_model_released/

[glad fulcrum]

My Lora doesn't look good though... the resemblence is off when using this

[heady vale]

remove control net and test the lora. once you are happy add it back in

[vital ermine]

whoa, just hit my first nude in XL

[glad fulcrum]

yeah good idea

[hardy cipher]

film noir

[hardy cipher]

these photos are from the 1870s

[crisp owl]

Oh dang, that's the great zombie invasion of 1876

[hardy cipher]

have you ever listened to super old audio recordings? they're so creepy. not the people exactly. just the fact that the earth pretty much recycles itself of all humans every hundred years

also, classy folk used to talk like cartoon mobsters

good god

[high skiff]

New workflow for step by step image diffusion gifs

[hardy cipher]

oooh

[high skiff]

supports 1.x, 2.1, SDXL, LoRA's, and different samplers

currently limited to 20 steps

might make it 30

lotta work tho lol

very tedious

[hardy cipher]

that's actually super cool. I've been wanting to learn more about that

hmm. I'm sure there's a way to streamline it

as far as adjusting steps

[high skiff]

with a custom node, for sure

all of my workflows are always stock only

[hardy cipher]

ahh. well that makes it a bit trickier

well curious to see the workflow

[high skiff]

Will be uploading it to my Ko-Fi when I get it working

[vital ermine]

Looks like those late 1960s B horror films.

[hardy cipher]

https://civitai.com/models/119667/sdxl-william-eggleston-style?modelVersionId=136673

[high skiff]

it is a very laggy workflow lol

[hardy cipher]

used that lora

[high skiff]

when getting closer, it runs at like 7FPS for me lol

I think I am running it on iGPU tho

[hardy cipher]

so glad they decided to trim it down a bit. v1 was 2.54 gb, lol

a bit excessive

[high skiff]

yeah, looks like iGPU

[soft bone]

"camera obscura" and "heliography" are my favorite prompts for vintage.

these people are trained loras. getting it to pull towards vintage from their 4k uploads and overfitted training is quite difficult. at least not impossible like darkness

[hardy cipher]

I'm assuming advanced k-sampler, sytan? I haven't quite figured out all the ins and outs as far as noise and start steps, stop steps, etc

[hardy cipher]

I guess without refiner it's quite a bit simpler

simpler samplers

[hardy cipher]

early photograph of a chad

[high skiff]

Heliography is a massively underrated tag

[soft bone]

i had to do research to find it lol

[hardy cipher]

I could do much better with 1.5 tbh

with vintage photographs

[high skiff]

I have another word, I need to find it

it works really damn good too

I forgot to write it down

[soft bone]

camera obscura is the name of the very first camera. works well

[vital ermine]

all I ever got from that was the actual camera

[soft bone]

i guess it helps that im using face loras so it forces the person in it

[vital ermine]

ahhh

1.5 was so great with camera stuff

[steady grove]

they're just json files right?

[high skiff]

ok, i found the word

its pretty magical

Lomography

[soft bone]

this will be soon. many finetuners are accurately tagging different cameras, effects, focal lengths, etc

[vital ermine]

lomo is awesome

[high skiff]

"Lomography is a photographic genre that relies on a camera rather than on a subject matter or technique. It encapsulates all photographs taken with a Lomo camera. And a Lomo camera is nothing like a modern DSLR or mirrorless camera. A Lomo camera is a Russian 35mm film camera."

[hardy cipher]

nodes?

[high skiff]

it makes things look like they were taken on like 1990's disposable cameras

[soft bone]

lomography is in SAI's official "analog film" style prompt. I also use "kodachrome" from there

[high skiff]

yeah, i forgot where I found it

[steady grove]

the workflows

[hardy cipher]

a few fun prompts to try. I forget what I typed in tbh. similar things

[hardy cipher]

twas a time before joy existed

best part about old photos like that is you don't have to be exact. having it a bit off adds to the overall aesthetic

[soft bone]

needs more grain imo

[hardy cipher]

hmm. I think so? never tried to change them though

[hardy cipher]

https://tenor.com/view/the-voice-the-voice-gifs-pharrell-williams-wink-gif-9641907

[hardy cipher]

this one is terrifying

[dense chasm]

LoRA with python coding run faster and more customised

[hardy cipher]

that picture exists outside of time

[dense chasm]

https://civitai.com/models/129762

[high skiff]

had to muster the strength

30 step gif exporter

[hardy cipher]

try kodachrome

for old photo

[high skiff]

with step count control, sampler, scheduler, LoRA support, res, and seed control

oh, i need to add CFG

[hardy cipher]

also, I used these artists for some reason: Andries Both, Joel-Peter Witkin, Dorothea Lange, Man Ray,

or photographers rather

[hardy cipher]

he has some kind of parasite I think

[high skiff]

I might have the record for the biggest node porn ATM

[glad fulcrum]

I don't even know what that means

[high skiff]

hehehehehe

[hardy cipher]

my god

[high skiff]

my fingers hurt lol

[hardy cipher]

I mean, it looks nice at least

[glad fulcrum]

are you feeling alright?

[hardy cipher]

I think my computer might look at it and turn itself off

[high skiff]

phenomenal

[high skiff]

it runs at single digit FPS if you get close enough for node shaders to load lmao

far away, its 75fps just fine, but close...

75 is my RF, so thats why

[dense chasm]

you should learn some basic neural network knowledge first,cuz LoRA training is based on machine learning algorithm

[queen adder]

What do you think about these parameters? what would you change?

Images: 430
Repeats: 10
Epoch: 6
Batch Size: 1
Total steps: 25,800

I think it will take a long time so im wondering what to reduce. maybe 5 repeats instead of 10?

[glad fulcrum]

my lora works perfectly on auto1111

[glad fulcrum]

in comfyUI it does whatever it likes,

1 in 100 the image is good

it just made a car and is a person lol

[dense chasm]

when you training character,the number repeats should be at least 50,then it will render more details,when batch size increase,txt2img results in higher weights becoming less saturated,but it take more training epochs to learn the target,the BS usually set 4

[queen adder]

I'm training general portrait photography but of various people

so i dunno if that counts as character

[high skiff]

slaayyyy

[high skiff]

[vital ermine]

Okay sexy love god got me this

[high skiff]

SDXL has spoken on its preferences lol

[vital ermine]

lol

[high skiff]

SD 1.0 went from white skin preference to SDXL's tan/brown skin preference lol

[soft bone]

when i use bs5 (caiths config) i have to train for 120 epochs (1 repeat) to get quality+likeness (when using random token), at 1e-3.

it should be insanely overfit but it's not at all. thats an hour for 15 images. while training sdxl is amazing quality, it definitely isnt "easier" like we were told it would be, especially without the dumb celeb name trick

[hardy cipher]

these pictures are kind of messed up

they're genuinely unsettling. I wouldn't even say they're good exactly

but ugh

[queen adder]

when i see people with image comparisons from epoch to epoch how are they doing that? can it automatically be done during training every time it makes a new epoch? or are they generating them after training is completely done?

[soft bone]

"save every n epochs", and "sample every n epoch"

[queen adder]

so if i have 6 epochs i should set "Save every N epochs" to 6 as well?

[hardy cipher]

well it'll save ever 6 epochs

[soft bone]

no that will only save the last one. you want to use this, at the bottom of kohya

btw it doesnt work very well

[queen adder]

ah, that's what im looking for, thanks

it doesnt work well because the GPU is under heavy load during training? or for a different reason?

[soft bone]

i have no idea tbh. the likeness from the person doesnt show in samples but if you use the exact same prompt and settings in regular inference likeness looks great

[queen adder]

in optional specifiers should the parentheses remain? in other words which of these two is correct formatting?
--w (832), --h (1216), --l (5)
--w 832, --h 1216, --l 5

[soft bone]

no parentheses

[heady vale]

Ronald McDonald prefers KFC 😆

[queen adder]

Just 50 more hours until training is done!

nvm it went up to 67 hours

[hardy cipher]

what sort of hardware are you running?

[queen adder]

RTX 3090

[hardy cipher]

with some things it hardly seems worth it to do it locally. you can use online services that'll do it many times faster

but if you're patient do your thing, lol

[queen adder]

i think what i might do is break down the imageset into quarters and train 4 separate times throughout the week.

[hardy cipher]

I was messing with training some other things not related to stable diffusion. and what have taken days on my personal computer took about an hour online

might have cost 1 or 2 dollars

[queen adder]

what GPU did you use in cloud computing?

[hardy cipher]

t4 or v100 I believe

probably the latter

[queen adder]

thats not that much better than a 3090 though

[hardy cipher]

you may be right. also used a100s for a few things. but realized they didn't always speed things up much

[autumn forum]

im getting 2s/it how is your 55s? lol

[queen adder]

I tried batch size 8. however i stopped training and switched to batch size 1 and it's 7s/it

[high skiff]

whats poppin peepole

[autumn forum]

no

[queen adder]

you are using a 3090 as well?

[autumn forum]

yes

[high skiff]

55s/it would be VRAM overflow

check your GPU memory

likely overflowed it past 24GB VRAM

[queen adder]

23.6/24GB.
but im on batch size 1 so what else am i supposed to do?

[high skiff]

look at your pooled memory

you're gonna be over 24GB, I am sure of it

you on windows?

[queen adder]

yes windows 10

[hardy cipher]

windows dissin

[high skiff]

also, you are likely over 24GB because of the optimizer/size/gradient accum

[autumn forum]

im on batch size 3 at 15.6gb vram usage? thats odd.

[high skiff]

screenshot your GPU page please

[autumn forum]

i am using adamw btw

[high skiff]

add um

adm

addem

[soft bone]

i use adamw with bs5 and grad=1 for 19gb vram

[queen adder]

i'm using adafactor optimizer

[high skiff]

I use adamW8bit with BS12 and grad 1 for 23.5GB VRAM

[high skiff]

yeah, you overfilled your VRAM

[soft bone]

lemme see your training config file?

[autumn forum]

adafactor i get about the same. thats odd are you using higher than 1024x1024 max size?

[high skiff]

this right here means you overfilled it, which monumentally slows things

[soft bone]

bucketing might cause it to go higher. i only train on square

[queen adder]

https://pastebin.com/m4Ykp3gN

[soft bone]

do full bf16

mem eff attn is useful for vram too

[queen adder]

will try this now

[queen adder]

i made sure to only use 3 different aspect ratios, total pixel size all being 1024^2

although tbh i still dont understand what bucketing is so i left it at min. 256 max 2048

[autumn forum]

nice yeah just wondering i tried bigger and it drastically made it longer. but your config is similar to mine yet its a lot slower. idk why tho. id love to help get that speed up

[soft bone]

even if the total pixel size was correct, your bucket resolution settings might be resizing it

just stay within bucket max and min res

[queen adder]

if i know for sure all my images are 1024^2 can't i just disable bucketing altogether?

[soft bone]

i think so

[queen adder]

yoooo i don't want to jinx it but check this out!

1.74s/it

[soft bone]

yeah thats more like it

[autumn forum]

yep thats about where im at

[queen adder]

i hope it's not ignoring my 1216x832 images because i only have a few 1024x1024 images in my dataset

[hardy cipher]

I'm quite happy to see this. I knew something wasn't quite right but don't know enough about the sdxl training to really know what it was

so is bucketing just rounding essentially? I'm not completely sure how that works either

[autumn forum]

why does my loss look like this. isnt it supposed to go down and stay down or is this like.. normal? idk i wish i was smarter about these things

[hardy cipher]

not necessarily

sometimes it hits spots that are harder to work through essentially

[soft bone]

tbh i hate loss graphs. after thousands of trained models i refuse to care what it says

woops didnt mean reply

[hardy cipher]

lol

[autumn forum]

okay so i shouldnt really worry to much about the loss graphs? im sure theres some meaning but maybe in lora it doesnt mean to much?

[hardy cipher]

I'd say look at the loss after each epoch, if you go several epochs without improvement then it's an issue I do believe

it's something to be aware of but I believe there are other metrics to use as well

I'd say you should start worrying if it either stays almost precisely the same or it starts increasing

steadily

[soft bone]

"improvement" is a visual metric in this case, the graph could be getting worse while the outputs are actually getting better

[hardy cipher]

if there's no movement it's clearly overfitting which is not good

[hardy cipher]

true, I should have said decreasing

[visual glade]

https://github.com/comfyanonymous/ComfyUI/commit/89a0767abf019817a73ad9c7a693a2efcff75b12

This should increase total gen speed a bit assuming there's no bugs, also the full SDXL controlnets should now work (slowly) even on very low vram GPUs

[hardy cipher]

I can controlnet now? very exciting

[soft bone]

i've been using controlnet in comfy for a few days but it sure could get easier

[autumn forum]

another question, if its overfitting does that mean i should lower the learning rates?

[soft bone]

that or steps

[autumn forum]

okay thanks for the help. i mean i have 900 images so only way to lower steps would be to lower epochs

[round kettle]

the SDXL training is quite intense, has anyone been able to get good sample images or is that simply just broken, even after 30k steps it's still generating colorful garbage as samples 😛

[hardy cipher]

depending on total epochs just save often enough that you can backtrack if it overfits

[autumn forum]

my sample images are.. lovely..

[hardy cipher]

I created some overfit nightmares early on. had to drop cfg to like 3 to use

[soft bone]

when training real faces, overfitting is very important. yes it damages some abilities of the model but if you dont do it then the base model is more free to change and interpret things about the trained face which lowers likeness and usually detail. this is far more tru for XL because its more sensitive (better) with prompts, and saying the wrong thing can totally erase the likeness if you didnt overfit. example: "xyz as a professional boxer". XL will mix in some face data from a real professional boxer that it already knows.

This is why i find loss graphs mostly pointless (for faces). I want overfitting, and the only way to judge how much is to try it and see. If training were as easy as getting the loss graph perfect then we wouldnt need humans to train models

[autumn forum]

make an ai model to train an ai model by rewarding it when the loss goes down lmao

[soft bone]

yeah wouldnt work

[round kettle]

+1 do you use kohya scripts? or something else to train the model?

[soft bone]

kohya if its lora

[vale eagle]

hmmm, I manage to not much overfitted but the lora keep high likeness.

[soft bone]

are you using celeb name or random token?

[vale eagle]

rare token and enable te training. Using caith preset with lora-fa

[soft bone]

but how complex can your prompts get before the likeness is ruined? surely if i feed it a 400 character artstation word salad it will not be high likeness. I want to gurantee likeness with wide range of prompting styles

[soft bone]

captions?

[vale eagle]

achieved something like this

[soft bone]

Okay i should also mention that I train on 10-25 images, the amount of good photos the average person has of themselves

[vale eagle]

Trained with 40 images. Captions is using caith style manually added. The above image was generated by 140/300 epoches using lora-fa

[dense chasm]

AI robot girlfriend lol

[heady vale]

Did a git pull and got this error. the base isnt loading

[soft bone]

did you have to increase epochs for lora-fa vs. lora? or any other params?

if theres a quality tradeoff for lora-fa i dont really wanna do it

[vale eagle]

My original baseline is 300 epoches using constant adam. The best result is around 275 epoch. The I do the same with lora-fa and the best reuslt is 140 epoch

[autumn forum]

what is lora-fa? explain in like a sentence lol

[soft bone]

just a new lora type like lycoris and loha and dylora

[vale eagle]

Freeze A and only train full connection layers. In simple, better memories efficient and training faster.

[soft bone]

wtf is full connection

[autumn forum]

nice okay makes sense. kinda. lol

[soft bone]

300 epochs at what LR? i had to double caiths epochs and triple the learning rate for good results

[vale eagle]

as same as default

[soft bone]

.0003?

forgot what he used and its not pinned ugh

[vale eagle]

.0005

[soft bone]

yeah at that rate it was taking me 2 hours for 16 imgs

not worth

[vale eagle]

It could certainly speedup by scaling the learning rate.

[visual glade]

how old is your pytorch?

[soft bone]

yeah im at .003 now and still an hour. no captions or reg tho. i still want to test with them

[heady vale]

nightly 31 July I think

[vale eagle]

You might try the lora-fa on kohya gui dev2 branch.

[soft bone]

yeah will do. did you see any downside to outputs whatsoever?
A/B comparison maybe?

[vale eagle]

It could reduce a half epoch to achieve similar result.

[vale eagle]

No, the lora-fa is better than all previous lora in same training set

[soft bone]

pressing x

ugh last time i checked out dev2 i couldnt revert

[vale eagle]

I had done abc testing on 140,150 and previous best and 140 is the best one.

[soft bone]

half epochs but is it twice as fast? or just double the s/it

[vale eagle]

No, same speed but half epoch

[visual glade]

should be fixed now

[soft bone]

same speed as in s/it or total training time?

[vale eagle]

The speed is limited by hardware but It could achieve the similar result in half epoch which means it could reduce half of the total times.

[heady vale]

no error. awesome. just doing some gens now

[soft bone]

hmm will try some time

[high skiff]

whats up, crunch nuggets?

IDk why it typed that

auto completed like an LLM lol

[hardy cipher]

crunch nuggets

[high skiff]

https://media.discordapp.net/attachments/1125856554097328251/1137459440715575377/rapidsave.com_zounioys74gb1.gif

[vale eagle]

@visual glade Might I ask why the advanced sampler set denoise as 1 and it couldn't modify from outside?

[high skiff]

average crunch nugget ^

[hardy cipher]

https://tenor.com/view/john-mcginnis-john-mcginnis-nugget-nuggets-gif-26298311

[high skiff]

those are soggy nuggets now

[heady vale]

yup no errors with AIT or without AIT. I dont really see a speed up though?

[soft bone]

https://tenor.com/view/trailer-park-boys-ray-lafleur-gif-20188842

name the show

[hardy cipher]

lol

[steady grove]

the boys

[high skiff]

@visual gladehave some node porn

[soft bone]

excellent

[crisp owl]

tpb

[hardy cipher]

https://tenor.com/view/bubbles-nunchakus-bubbles-gif-19798538

[steady grove]

i mean, its not rocket appliances

[soft bone]

well done everyone

[visual glade]

setting denoise is the same as setting the start step

so both would conflict

[high skiff]

also, for anybody who uses comfy

not sure why this tool tip is not shared more

click a node and press control B, and it mutes it

[visual glade]

if you were already running it with --highvram you won't see an improvement

[high skiff]

like a LoRA, it disables it and lets the model pass through

[crisp owl]

Now mute all the nodes so they are opaque and retake that screenshot

[hardy cipher]

Breaker breaker, come in Earth. This is Rocket Ship 27. Aliens f*cked over the carbonator in engine #4, I’m gonna try to refuckulate it and land on Juniper. Hopefully they got some space weed, over.

[heady vale]

only have 10gb 3080 so cant run that flag

[high skiff]

IT WORKED LMAO

[vale eagle]

Oh, that solve my question

[steady grove]

/cabaret music

[soft bone]

ctrl-m for me akshually🤓

[high skiff]

✨ *** SKETTY NOODLE*** ✨

[crisp owl]

Ooooooooooooh

[hardy cipher]

that's not real

[high skiff]

thats a lot of nodeage

[visual glade]

the improvements are in the 0.5-1.0 seconds lower per gen if your GPU has enough vram

[heady vale]

lol

[high skiff]

its real, and its coming for youi

the attack of the 3FPS comfy UI

I wish I was overexaggerating that

it legit gets down to 3fps

[hardy cipher]

it'd be about .3 fps for em

[soft bone]

how is that stuff automated? surely not made manually

[hardy cipher]

or maybe .03

[high skiff]

smol screenshot

[crisp owl]

Why not?

[steady grove]

focusin

[high skiff]

2.38fps lol

[heady vale]

OK I didnt write down my gen times. If anyone else updates comfyUI check the gen times before and after

[soft bone]

cause anyone that autistic is already building in minecraft

[high skiff]

1.98

[crisp owl]

Sometimes nodecrafting in itself is a game

[steady grove]

why is having focus always an autism trait?

[hardy cipher]

man, during covid life I did some nutty things with minecraft

[soft bone]

focus to connect 2000 speggetis to dots? oon repeat? thats brain numbing not focus

[high skiff]

it runs smooth as butter, until it does the drop shadows for the noodes

@visual glade is there a way to turn off the connection lighting?

[steady grove]

for some numb brains maybe...

[high skiff]

cause god DAMN it murders perf

[steady grove]

anyways

[high skiff]

Difference between effortless 75fps and labored 4 FPS lol

[hardy cipher]

what's your noodle count there?

[high skiff]

not sure where I see that

[heady vale]

didnt someone make an ext to turn off connections?

[high skiff]

I can esitmate

[hardy cipher]

yeah, not sure how to just see it, but wouldn't be that hard to guesstimate

[high skiff]

I have at least 900 node connection lines

101 nodes

[soft bone]

i wanna see it with the piping/straightening thing on

[crisp owl]

Yes, but he removed it in a subsequent update

[hardy cipher]

linear piping is best

[upbeat summit]

this could open a wormhole

[heady vale]

oh ok

[soft bone]

to vega we go

[high skiff]

I would hope the straightening would make it much more performant

since it doesn't have to do curve compute

HMMM

[hardy cipher]

linear piping doesn't need to do 90 degree corners

https://tenor.com/view/bruce-lee-karate-slow-motion-fight-me-lets-fight-gif-16092390

[soft bone]

did you inpaint those gummy faces or something? theyre all identical

[heady vale]

nah thats all SD

[soft bone]

insane

[high skiff]

ess de

may my noodle-age strike fear into the hearts of simple minded auto users >:D

[ionic dragon]

this is your workflow?

[high skiff]

its a new specialty one I built

[azure oxide]

are those all essentially the same function? just with like 1 step increments?

[high skiff]

will be up on my Kofi tomorrow for members

[high skiff]

yes, and a lot of value controls

[crisp owl]

Anyone ever have it where when you do "Batch Count" (not batch size) of more than 1, the metadata is identical across every image created?
Did over 200 last night, came back to everything carrying the same metadata as the first image -_-

[heady vale]

https://tenor.com/view/old-man-guy-senior-walker-gif-21035245

[high skiff]

looks like this when the nodes are not muted

[azure oxide]

wonder if anyones ever going to implement functions/scripts for comfy like unreal engine does. you would never see repetitive nodework like that there because the easier method is to create that once then just call it as a function again

[high skiff]

https://media.discordapp.net/attachments/1089974139927920741/1141573980474581022/7w09p3.gif

what the workflow does ^

step by step image diffusion

[ionic dragon]

whats kofi?

[high skiff]

an alternative to patreon

[azure oxide]

didnt joe point out an easier method of doing that

[high skiff]

A location where people can sub to me monthly for additional workflows/early releases/dev logs/WIP's/personal questioning and more

[azure oxide]

with this

[high skiff]

not that I know of

[high skiff]

no, thats not the same thing

that just lets you see it diffuse in realtime, mine saves each step as an image for you to composite into a gif or video

[azure oxide]

ya he shows you how to save it in the following comment

[high skiff]

ah, even then, its not stock

there is also whimsy with watching all the gears turn lol

[ionic dragon]

ngl, huge prompts generate great images

[high skiff]

they can

[clever verge]

Can Comfy generate depth-maps natively or do you have to resort to custom nodes?

[high skiff]

here is another new one

[azure oxide]

AIT is awesome

3090 on 45 steps, 3m sde karras, takes 10 seconds to generate 1024x1024 and 7 more seconds to upscale it to 2048x2048

was about ~28 seconds to do the above without it

shaves a good ~10 seconds off, a little over +33% faster. pretty damn awesome

[steady grove]

thought they figured out yesterday it wasn't compiled to work on the 3090 yet

ait devs must work fast

[uncut fiber]

@azure oxide just not exactly it, without it. Dont know if better or worse. Just bit different.
it is working with 3000 serie, just not as good as it could

And yes impresive i am using it as well AIT

[azure oxide]

i had issues getting it to work at first but that was mainly because i had a week old version 😅
a git pull fixed it for me easily. very easy plug and play

[clever verge]

Probably marginal on VRAM. 🙂

[uncut fiber]

@azure oxide btw do you have disabled Keep loaded?
@clever verge if you have memory issues with AIT, disable keep in memory. It looks like something important, but performance "same" and no memory issues. PureFire told me it is memory hungry.

[hasty mortar]

Guys

[hasty mortar]

4 times my GPU

Powa

Anyways

[azure oxide]

yeah i have it disabled but i notice it doesnt do anything. on or off, i constantly have it cached

[hasty mortar]

I managed to install the custom nodes, but you guys need to rename the folder cloned from git

[uncut fiber]

in my 8GB case it is lifesaver

[hasty mortar]

Otherwise 🐍 gives you a fetch error

You need to remove "-main" or "-master" from the folder's name

[azure oxide]

im not running anything 😅

it should be at 2gb/24gb

[hardy cipher]

what custom nodes?

[azure oxide]

its no big deal, i can just flush it by restarting the .bat when i need to

[uncut fiber]

Probably it need restart some sort. If i keep it enabled first generation took probably 3 mins

[high skiff]

I am going to nuke paypal

[hasty mortar]

All the ones I downloaded during our last comfyui event

Basically

[high skiff]

genuinely the most incompetent company I have ever had the displeasure to ever be fucked over by

[hardy cipher]

oh, they've been like that since they existed

[high skiff]

for legal reasons, the nuke threat was a joke

[hardy cipher]

I have an account because every so often it's necessary

but not sure why they're still as popular as they are

[high skiff]

I am about to unleash the limited edition 10th circle of hell on them

[hardy cipher]

did they take your money and then say they can't let you use it?

[high skiff]

oh no, oh no no no no

wayyyy worse

[clever verge]

I'm running training.

[high skiff]

they sided with me on a blatant fraud claim

had me send back the item, and are now telling me my shipping info is invalid, while also telling me they can see it was delivered and they will refund me in 4 days

I have spent over 6 hours on the phone with them, over a month of my life pulling my hair out, and missed the first day launch of SDXL 1.0 with my workflows cause some dick sneeze seller decided to try and blatantly scam me while attempting to gaslight me into eating the money for it

[uncut fiber]

o.k. @clever verge

[hardy cipher]

well I'm sorry that happened to you. they're pretty top tier scum, even for a corporation

[clever verge]

I wounder if it would be a good idea to put in the 2060 super back in as the main card and use the other for AI-tasks.

[high skiff]

like bro, i have 4 different delivery confirmations, with images

15 images of the item's condition, packaging, and padding, and even paypal themselves saying they already saw it was delivered

Yet after me reopening this claim 3 times, its still "illigitimate" tracking info, even tho they can see its been fucking delivered?

[hardy cipher]

think of how much money they make because people just give up

[high skiff]

I will sick my bank on paypal if they don't fix their shit real soon, and I have a fierce fucking credit union

[hardy cipher]

it's part of their business model

[high skiff]

my bank has gone after people for incorrect tax for me before

legit like $2, and they tore after people for it

can't wait to see what they do with over 300 message screenshots of the seller self incriminating, eventually saying its his fault, apologizing, approving the refund, all of my proof's of shipping, paypal saying the item is recieved, ups saying the item is received, and alll of this

[ionic dragon]

@high skiff made a py code to extract 50 random words from these words, want the script?
https://github.com/theovercomer8/captionr/blob/main/data/flavors.txt

[high skiff]

I really need this fucking money

[high skiff]

some other time, I am boiling right now

[ionic dragon]

what happened

[high skiff]

https://tenor.com/view/rage-road-raging-fuming-mad-gif-19922407

me

[ionic dragon]

lemme read the prev images

[high skiff]

this isn't even MY money I need back

its my moms

https://tenor.com/view/saussiçon-explode-boom-gif-16089684

paypal headquarters in my brain right now

||for legal reasons, a joke||

||for now... >:)||

[ionic dragon]

@high skiff oh wait, paypal isnt refunding the money that sickass delivered you?

[high skiff]

i was about to sleep, and now my blood is so hot my sheets might be fusing together

[hardy cipher]

I signed up for some crap delivery service on my phone because one of my friends suggested it. turns out it sucks. they charged me 3 times for a delivery but then canceled it each time. but took my money. said it'd be back in a few days. so I canceled the service immediately. then they had the audacity to try to charge me a monthly fee for their premium service that I never signed up for. I got like a month free for signing up, but literally about a day later told them on the phone I would not be using it again

that's how these companies roll

I just set it as a fraudulent charge in my banking app

didn't get charged again

[high skiff]

at least the mods from the selling platform have had my back this whole time

straight up KINGS

they bullied him so hard when I was getting worn down

[hardy cipher]

nice. well it's all about how you come at them

[ionic dragon]

r/hws is great, they do a lot to keep scammers away

[high skiff]

I didn't use r/, just the discord server

but yeah, they have had my back from day one

I mean, its hard not to

76 bluescreens related to GPU cooling issues on a GPU that was disected at least a dozen times

[ionic dragon]

i meant the server
as the sub is closed

[high skiff]

as well as the seller admitting to forgetting 7/18 screws (how the FUCK), running warranty voiding bios, and running the card in a warranty voiding way

[hardy cipher]

did reddit shut it down? lol

[high skiff]

right, right, i forhot they are all discord now

[high skiff]

no

[hardy cipher]

"forgetting"

[high skiff]

discord with its forums just works a lot better now

[high skiff]

my exact thought too

[hardy cipher]

oops, must have dropped those 7 screws. my bad. thought there were 18, but there were only 11

[high skiff]

bro just happened to forget almost HALF THE SCREWS

[ionic dragon]

they ditched reddit and moved to discord due that api strike and stuff

[high skiff]

3 screws from the PCIE bracket, 2 from the backplate, and 2 from the core mount

What a specimen

[hardy cipher]

I remember back in the old days reddit was alright

[high skiff]

AH

I got jumpscared

[hardy cipher]

when spacedicks was still a thing

[ionic dragon]

@high skiff why dont you tell that guy to return the money?
is he denying?

[high skiff]

I hit some key on my keyboard wrong and just got ear blasted with "WINDOWS NARRATOR ENABLED"

[high skiff]

I am so far past that its pathetic man

headass

his name is different now

he just got perma banned from all of their platforms and affiliates

bro got me in a

https://tenor.com/view/why-i-outta-you-cant-see-me-ouch-gif-13436680

mood

WHY I OUGHTAAAA

[ionic dragon]

what is paypal telling you?

[high skiff]

fuck all

they are telling me that they sided with me, and that I will have my refund

While also telling me they never got the shipping info for the card

While also telling me the card arrived

While also telling me they can't confirm the card arrived

While also telling me they are processing the refund as they validated the card is there

While ALSO telling me the case has been closed in the scammers favor

[hardy cipher]

they want to keep you on your toes

[high skiff]

the headassery here is so thick I can cut it with a knife

paypals density rivaling a neutron star right now

[hardy cipher]

oh, they know what they're doing

[high skiff]

they better stop fucking around before I sue them for damages

[ionic dragon]

@high skiff i dont live in the us and dont know how the police work, why dont you reach the police regarding this

[hardy cipher]

police don't care about crimes

[high skiff]

I have an auto immune disease triggered by stress, my mom is a recently widowed woman balancing a mortgage after my fatheres recent passing

I relied on this item to help try and secure a means of income for myself

I will suck them dry for everything they GOT

thats what, at least $10,000 damages?

plus throw in the legal fees

[hardy cipher]

I went to the police station once to report my mountain bike being stolen from behind my friends place and they said because it was unlocked it wasn't stolen, someone just took it. and then the lady behind the desk stood up like I was doing something wrong. most bizarre thing I've ever dealt with

so needless to say I didn't file a report on that. probably should have filed a report on her

[high skiff]

its not gone, its just not here

[hardy cipher]

I asked her what it was if not stolen. "sounds like someone just took it"

was her response

maybe the cops are better where you are, lol

[high skiff]

paypal hired her shortly after, legend says

my mom IS a paralegal, and did go to school specifically for small claims court

she has sued before, and won

Wonder if we could milk paypal for this fuckery

[hardy cipher]

they'll quickly change their tune if seriously challenged. but they know they don't have to with most people. most people just give up.

[high skiff]

not me, I'm a fucking ankle biter

after their fat opulent ankles >:C

[high skiff]

my immediate thought was blowing that up, I am in such a mood right now

[hardy cipher]

with customer service I like to find a balance

[high skiff]

when I get upset, I don't get mad, I get chaotic

its not planned murder if you don't know how you ended up there

||legal reasons = joke||

[hardy cipher]

not take no for an answer, but then remind the customer service person that I know they'rejust following policy, that it's nothing personal

[high skiff]

thats me 99.9% of time

But I am after some blood now. Which is why I will be nice until I have somebody who can actually do something on the phone

i have gotten soooo many nice things for free from just showing humanity to sales and tech people

PayPal has no idea what they are in for

actually, nevermind, redacting that

[hardy cipher]

lolol

I've read some serious horror stories though. where sellers that are making a living off of paypal sales just have their accounts frozen

30k, 50k, whatever

any maybe they can get their money back

but then they have to fight for that, and no more sales

[high skiff]

you know, the more I think of it, I might ACTUALLY have a damages case here

[craggy ibex]

What the fuck

HOW DOES THIS PERSON TURN THIS NOOB ROBLOX AVATAR TO A SUCH A COOL BEING?

I did everything I can :(

[late marsh]

Mad skillz

[craggy ibex]

Idk anymore

I used both Comfyui and WebUI

Comfy UI doesn't support img2img too

It's impossible

[late marsh]

Try just txt2img prompting 😄

[glad grove]

skill issue

[craggy ibex]

You can say that

I have 0 knowledge about coding

duh

[glad grove]

img2img high denoise,simple and concise prompt

[ionic dragon]

is anyone having issues with 536 drivers?

[craggy ibex]

Nah I think no

Searge is bad

Maybe I can change Lora

[late marsh]

Just an educated guess: that image on the right is not made from the left one with img2img. It's a txt2img generation

[glad grove]

https://tenor.com/view/ez-noob-skill-issue-simply-a-difference-in-skill-gif-20780203

[craggy ibex]

Fix it then

[craggy ibex]

Well, there is an option for me switch between txt2img and img2img

[vale eagle]

I feel it like to be a strong biased model accept the reference image using near.95 denoise strength to produce a overfitted image from the model.

[jolly creek]

mornin'

[craggy ibex]

morning

Why am I so bad at at using Stable Diffusion? :(

[hardy cipher]

that's not what you were trying to make?

[glad grove]

https://tenor.com/view/blacksite-zeta-blacksite-skill-issue-riftline-bot-commander-gif-20974172

[patent wraith]

/dearm

[hardy cipher]

get on my level

[high skiff]

@visual glade Any chance of us getting a model unload button in order to save energy at idle? My 3090 uses about 110 watts idle to maintain SDXL in my VRAM

I have been resorting to closing comfy and re-opening it when I wanna use it, but I way to offload the model would be amazing. Caching it to system RAM and then bouncing it back to VRAM

[flint sleet]

he used prompt no pic

yes its skill issues

[hasty mortar]

Manager to install custom nodes https://github.com/ltdrdata/ComfyUI-Manager

If anyone here was afraid to ask my same question... This was the answer

[craggy ibex]

He did used pic

[peak dove]

Use Comfy Manager/Derfuu Nodes for img2img https://youtu.be/Zteta2_JvdA

[craggy ibex]

how in the world that this person can turn roblox avatars to cool ai generated characters that look like thำ reference

[strong leaf]

hey how to get good at comfyui

[craggy ibex]

I used this

https://github.com/SeargeDP/SeargeSDXL/tree/main

[strong leaf]

bro i just downloaded it and dreamshaper 8 and the results are bad asf

[strong leaf]

what does it do

[craggy ibex]

For img2img purpose

but It's my first time using this kind of stuff

sooo

yuh

[strong leaf]

show me your good images

[craggy ibex]

Not cool at all

[strong leaf]

is dreamshaper 8 good?

[craggy ibex]

I have never use it before

sorry

[strong leaf]

lmao

is this good?

this is how to should be

@craggy ibex

[craggy ibex]

Very gud

[strong leaf]

its BAD ASF WDYM???!?!?!

[vale eagle]

Did anyone notice controlnet is an option in the bot? But it requires access.

[turbid garnet]

Exciting news, everyone 🎉!

Monster API SDXL now supports 20 amazing Styles!

Steer your image generation workflow towards a specific style.

Try it out here - https://lnkd.in/gH3j3p9F

[molten gull]

i wonder how many people use stable diffusion ... and where they all are. feels like here's only a dozend guys altogether

[upbeat summit]

millions of people - websites, services and applications like our local setups

[molten gull]

And where are they all ? Not here for sure 🙃

[mossy canopy]

give me a prompt

[molten gull]

a prompt? "a dog living in a cat"

[ionic dragon]

did anyone code a custom node?

[molten gull]

🙂 where's the cat ?

[vale eagle]

yes

[molten gull]

what does it do, xiao?

[vale eagle]

I had made two custom nodes. One is SDXLMixSampler, it is able to loopover multiple times of base->refiner process. Another one is latentByRatio, it is able to create empty latent by selecting ratio.

[molten gull]

nice 🙂

[ionic dragon]

i have a py script how to make it into a custom node?
can i dm?

[vale eagle]

sure

[ionic dragon]

sent

[polar epoch]

Have 70 something CFG dragon in comfy

What way of upscaling is the best way? Use Ksampler with higher canvas res? Or a upscaling model? As i feel upscaling models doesn't really use the main models to add way more details.

[gloomy needle]

u can do like this

workflow is in image

sorta like hires-fix but with consistency

[gloomy needle]

https://github.com/Extraltodeus/noise_latent_perlinpinpin

[uncut fiber]

speaking about batman, i dont understand this image.

[native knot]

heh

[soft zealot]

I like how it picked up the OG Yvonne Craig colours without being asked too

[uncut fiber]

i love that style, even dresses and all is mixed there.

[strange mist]

pretty good batgirl ❤️
dynavisionXL?

[soft zealot]

you, it has a "look" 🙂

[strange mist]

yeah, it does 🙂

[soft zealot]

even when mixed with others.

Eg this is the same prompt|seed|styles etc but using DynaXL as the primary pass and Dreamshaper for a secondary pass

[native knot]

Need to fix the ears.

Coming up brown in both renders.

[strange mist]

what if you reversed the order? 🤔
dreamshaper first then dyna?

[soft zealot]

thats cos she hasnt git her mask on so you're seeing the hair thats normally inside them :p

[native knot]

lol

[soft zealot]

that I am just doing

[next night]

Guys im new to this, should i download sdxl or stay on dreamshaper 8

[native knot]

Why not try SDXL to see if you like it. 🙂

[soft zealot]

there is no right or wrong answer as to which model to use, its up to you 🙂

[soft zealot]

Dreamshaper than DynaVision

[native knot]

A little more work and that'd be great, too.

[soft zealot]

I like low effortt lol

[tall bay]

is there a list of banned words for SDXL? it'd be great to be able to filter prompts / indicate which words are causing problems 😬

[strange mist]

the look is not so prominent, but it's still there, I think 🤔

[soft zealot]

there is no such thing as a banned word

[next night]

What do you think, idk i tried dream shaper 8 and it looks bad, i used the same prompt the owner had and got a totally bad image compared to his

I think theres something with my comfyui

[polar jacinth]

catdog

[native knot]

I thought the same thing...that's totally catdog

[soft zealot]

FYI Dreams shaper 8 is (according to their Civitai page) *not an SDXL model

[next night]

How go download extension for comfyui, like in auto1111

[next night]

Idk what are you saying

wtf you mean by FYI

[soft zealot]

well in the same way that you just used wtf for "what the flock" I used FYI as a TLA for "For Your Information"

Its a verry common one and not exaclty new

[next night]

Oh sorry i thought it was a term related to ai, anyways whats the difference and what should i use? Dreamshaper8 or sdxl1.0

Btw i meant "what time friend"

[native knot]

There is no right or wrong answer. Use both, use neither, use anything you want. You need to try things to see what you like.